mtk-20170518/target/linux/ramips/mt7688, branch master MTK 20170518 : Mediatek SDK based on OpenWRT Barrier Breaker ramips: merge mt7628/mt7688 into mt76x8 2017-08-30T15:05:10+00:00 L. D. Pinney ldpinney@gmail.com 2017-08-26T01:49:45+00:00 3e36ca4b436510a6e411484db47f7df35ebaf86d The ramips subtargets of mt7628 and mt7688 dts files all #include "mt7628an.dtsi" They are essentially a single subtarget. This patch merges the ramips subtargets mt7628 and mt7688 into a single subtarget mt76x8. Signed-off-by: L. D. Pinney <ldpinney@gmail.com> 
The ramips subtargets of mt7628 and mt7688 dts files all #include "mt7628an.dtsi"

They are essentially a single subtarget.

This patch merges the ramips subtargets mt7628 and mt7688 into a single subtarget mt76x8.

Signed-off-by: L. D. Pinney <ldpinney@gmail.com>
ramips: drop stray kernel 4.4 configs 2017-07-27T07:17:25+00:00 Mathias Kresin dev@kresin.me 2017-07-25T17:37:08+00:00 7985bf23efe19a48f84381f9f565dc64e8c4b753 The kernel 4.4 patches where already removed with the bump to 4.9. Drop the the subtarget configs as well. Signed-off-by: Mathias Kresin <dev@kresin.me> 
The kernel 4.4 patches where already removed with the bump to 4.9. Drop
the the subtarget configs as well.

Signed-off-by: Mathias Kresin <dev@kresin.me>
kernel: cleanup CONFIG_SCHED_HRTICK 2017-06-29T02:46:59+00:00 Stijn Tintel stijn@linux-ipv6.be 2017-06-29T02:46:59+00:00 880f73c327799e402a5bd47bb2f324848951af63 Remove CONFIG_SCHED_HRTICK from target configs, as it was added to the generic config in b47fd7656336162360ebf66147326763ddae3f8d. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> 
Remove CONFIG_SCHED_HRTICK from target configs, as it was added to the
generic config in b47fd7656336162360ebf66147326763ddae3f8d.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
kernel: disable CONFIG_SG_POOL by default 2017-06-07T16:31:10+00:00 Sergey Ryazanov ryazanov.s.a@gmail.com 2017-05-30T21:46:40+00:00 68e7a2a0b7d8730933d3788806c3480c8f0d09de CONFIG_SG_POOL symbol is selected only by CONFIG_SCSI, since the last one is disabled by default then disable CONFIG_SG_POOL by default too. And explicitly enable it only for platforms that use CONFIG_SCSI. Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> 
CONFIG_SG_POOL symbol is selected only by CONFIG_SCSI, since the last
one is disabled by default then disable CONFIG_SG_POOL by default too.
And explicitly enable it only for platforms that use CONFIG_SCSI.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
ramips: purge default packages on MT7621 2017-05-04T12:13:23+00:00 Daniel Golle daniel@makrotopia.org 2017-05-04T12:07:47+00:00 d17cb4a68a4544dca690629ee9a2483da29fa42a In order to have a smaller initramfs image remove all packages not needed on all devices and add them explicitely for those actually needing them. Also remove wpad-mini from ramips default package set and add it to all sub-targets except for MT7621. While at it reorder packages alphabetically and replace kmod-mt76 with kmod-mt7603 and/or kmod-mt76x2 depending on the chip actually used on a specific board. Hopefully fixes FS#758 Signed-off-by: Daniel Golle <daniel@makrotopia.org> 
In order to have a smaller initramfs image remove all packages not
needed on all devices and add them explicitely for those actually
needing them. Also remove wpad-mini from ramips default package set
and add it to all sub-targets except for MT7621.
While at it reorder packages alphabetically and replace kmod-mt76 with
kmod-mt7603 and/or kmod-mt76x2 depending on the chip actually used on
a specific board.

Hopefully fixes FS#758

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
ramips: clean kernel config symbol conflicts for MT7688 PWM 2017-03-20T07:17:34+00:00 Furong Xu xfr@outlook.com 2017-03-15T08:47:59+00:00 2fd1a3e9129bb51b1747924264996aaf26570493 pwm-mediatek should be selected in Other Modules submenu, not default to yes. Signed-off-by: Furong Xu <xfr@outlook.com> 
pwm-mediatek should be selected in Other Modules submenu, not default to yes.

Signed-off-by: Furong Xu <xfr@outlook.com>
ramips: fix the number of uarts for MT7688 2017-02-16T08:09:37+00:00 Furong Xu xfr@outlook.com 2017-02-16T03:10:28+00:00 f885edef5a3bfcddcfe85732ee65c1d475c4a8f6 Same as MT7621 and MT7628, MT7688 allows up to 3 uarts Signed-off-by: Furong Xu <xfr@outlook.com> 
Same as MT7621 and MT7628, MT7688 allows up to 3 uarts

Signed-off-by: Furong Xu <xfr@outlook.com>
ramips: add v4.9 support 2017-02-14T11:17:52+00:00 John Crispin john@phrozen.org 2017-02-13T11:38:27+00:00 9c2422709075196022fcbc2d0f5f83e01d02b951 NAND support is missing Signed-off-by: John Crispin <john@phrozen.org> 
NAND support is missing

Signed-off-by: John Crispin <john@phrozen.org>
switch to the new usbport LED trigger 2016-10-19T10:09:45+00:00 Rafał Miłecki rafal@milecki.pl 2016-10-19T10:09:45+00:00 0658527e1ebe666cabde9267b6afbe543314160c This makes init.d script handle existing UCI entries using the new trigger. It also switches all targets to use its package. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> 
This makes init.d script handle existing UCI entries using the new
trigger. It also switches all targets to use its package.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
ramips: switch from 24kec to 24kc 2016-08-08T09:29:56+00:00 Jonas Gorski jonas.gorski@gmail.com 2016-08-08T09:27:04+00:00 bebcb81da5dacb82f6876ae777bc13f5465d0eaa Since the only difference between 24Kec and 24Kc is the addition of DSP ASE support, and we don't use it anymore, there is no need to keep 24Kec as a separate cpu type. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> 
Since the only difference between 24Kec and 24Kc is the addition of DSP
ASE support, and we don't use it anymore, there is no need to keep 24Kec
as a separate cpu type.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>