mtk-20170518/target/linux/ramips/rt305x/config-3.7, branch v18.06.1 MTK 20170518 : Mediatek SDK based on OpenWRT Barrier Breaker ramips: drop 3.7 support 2013-05-07T10:58:44+00:00 John Crispin john@openwrt.org 2013-05-07T10:58:44+00:00 036fb79052a8b02fa1ae50f16862dc0ccbc439e4 Signed-off-by; John Crispin <blogic@openwrt.org> SVN-Revision: 36572 
Signed-off-by; John Crispin <blogic@openwrt.org>

SVN-Revision: 36572
ramips: add kernel support for the Upvel UR-326N4G board 2013-03-11T21:02:40+00:00 Gabor Juhos juhosg@openwrt.org 2013-03-11T21:02:40+00:00 3c2ef04a0ea579c5cedd09d608d39b4b6bf635bc [juhosg: add missing symbols to config-3.{7,8}] Patch from: Дмитрий Лебедев <lebedev@trendnet.ru> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35970 
[juhosg: add missing symbols to config-3.{7,8}]

Patch from: Дмитрий Лебедев <lebedev@trendnet.ru>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35970
ramips: add kernel support for the Edimax BR-6425 board 2013-02-02T17:01:47+00:00 Gabor Juhos juhosg@openwrt.org 2013-02-02T17:01:47+00:00 0a42e38bad10f41d7effb430716d3a4851a90fd1 Signed-off-by: Yuval Adam <yuv.adm@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35462 
Signed-off-by: Yuval Adam <yuv.adm@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35462
refresh kernel configs 2013-02-01T17:28:40+00:00 Gabor Juhos juhosg@openwrt.org 2013-02-01T17:28:40+00:00 fb2e2a56d7f326e4d9b8c65c4ba68991af871302 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35434 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35434
ramips: add kernel support for the Tenda 3G300M 2013-01-19T17:05:03+00:00 Gabor Juhos juhosg@openwrt.org 2013-01-19T17:05:03+00:00 7eff5d2df0d21f3a54db650e7883548a59183841 Ralink RT3052F, 4MB flash, 32MB ram, one USB 2.0, two buttons and seven leds. Factory image should be used to flash from original firmware. Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35244 
Ralink RT3052F, 4MB flash, 32MB ram, one USB 2.0, two buttons
and seven leds.

Factory image should be used to flash from original firmware.

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35244
ramips: rt305x: add kernel support for the Planex MZK-W300NH2 Router 2012-12-29T17:50:35+00:00 Gabor Juhos juhosg@openwrt.org 2012-12-29T17:50:35+00:00 d6d06aceb0afee15594ed25a3ffd58fb7d5f4a19 This is a Japanese market router, for details check http://www.planex.co.jp/product/router/mzk-w300nh2/. It has only 16MB RAM, but base OpenWRT install worked fine for days without issues. Even an image with built-in Luci worked, but don't expect smooth experience, due to the lack of RAM. Wifi was not extensively tested, but seems it is working. GPIO LEDs & buttons, factory flash image and switch config are confirmed working. Tested against revision 34882 + this patch. [juhosg: move user-space support and image generation changes into separate patches] Signed-off-by: Samir Ibradžić <sibradzic@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/3077/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34925 
This is a Japanese market router, for details check
http://www.planex.co.jp/product/router/mzk-w300nh2/. It has only 16MB
RAM, but base OpenWRT install worked fine for days without issues.
Even an image with built-in Luci worked, but don't expect smooth
experience, due to the lack of RAM. Wifi was not extensively tested,
but seems it is working. GPIO LEDs & buttons, factory flash image and
switch config are confirmed working. Tested against revision 34882 +
this patch.

[juhosg: move user-space support and image generation changes into
separate patches]

Signed-off-by: Samir Ibradžić <sibradzic@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3077/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34925
ramips: rt305x: add kernel support for AirLive AIR3GII 2012-12-29T17:50:28+00:00 Gabor Juhos juhosg@openwrt.org 2012-12-29T17:50:28+00:00 3fcb8bb0ddc282703f0b8027ee71a7ef2497c336 AirLive AIR3GII is Ralink RT5350F based device with 100Mbps switch, USB port, 4MB flash and 32MB ram. Works: ethernet (LAN & WAN), wps button, led, USB, sysupgrade Does not work: wifi (chip RT5350), reset button [ 13.390000] phy0 -> rt2800_init_eeprom: Error - Invalid RT chipset 0x5350 detected. [ 13.400000] phy0 -> rt2x00lib_probe_dev: Error - Failed to allocate device. Other problem: LAN leds is reverse (lights when not cable connected and vice versa) [juhosg: move user-space support and image generation changes into separate patches] Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/2913/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34922 
AirLive AIR3GII is Ralink RT5350F based device with
100Mbps switch, USB port, 4MB flash and 32MB ram.

Works: ethernet (LAN & WAN), wps button, led, USB, sysupgrade
Does not work: wifi (chip RT5350), reset button

[   13.390000] phy0 -> rt2800_init_eeprom: Error - Invalid RT chipset 0x5350 detected.
[   13.400000] phy0 -> rt2x00lib_probe_dev: Error - Failed to allocate device.

Other problem: LAN leds is reverse (lights when not cable
connected and vice versa)

[juhosg: move user-space support and image generation changes into
separate patches]

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/2913/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34922
ramips: add support for 3.7 2012-12-22T12:11:13+00:00 Gabor Juhos juhosg@openwrt.org 2012-12-22T12:11:13+00:00 b44cdcde8e9af4ac2cc4f94f11452a9c7d1f7dae Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34845 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34845