mtk-20170518/target/linux/ramips, branch nearest-from-mtk-20170518 MTK 20170518 : Mediatek SDK based on OpenWRT Barrier Breaker ramips: fix OMNI-PLUG.dts 2014-08-21T06:41:27+00:00 John Crispin john@openwrt.org 2014-08-21T06:41:27+00:00 e9e519a1477d1e5f1f6a7cf50ebf1c67c8dac4b7 Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 42232 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 42232
ramips: add omni plug leds 2014-08-18T16:09:21+00:00 John Crispin john@openwrt.org 2014-08-18T16:09:21+00:00 ff3ea027720777b3dd6256d95cd5b81039178c18 Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 42201 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 42201
ramips: Add support for Omnima MiniPlug 2014-08-18T16:06:48+00:00 John Crispin john@openwrt.org 2014-08-18T16:06:48+00:00 d04cab8dfc8340b530363c6afc99c86dccb075d1 This patch adds support for the Omnima MiniPlug RT5350 based board, 8MB SPI flash Signed-off-by: Ivan Ignjatic<ivan@omnima.co.uk> SVN-Revision: 42200 
This patch adds support for the Omnima MiniPlug RT5350 based board, 8MB SPI flash

Signed-off-by: Ivan Ignjatic<ivan@omnima.co.uk>

SVN-Revision: 42200
ramips: fix switch config for Edimax 3G-6200n 2014-08-18T13:10:04+00:00 John Crispin john@openwrt.org 2014-08-18T13:10:04+00:00 be6bbc7975462785e55d7722ba547ee06df2dbe2 Switch in Edimax 3G-6200n also require full switch reset, not only vlan definitions. Tested on Edimax 3G-6200n. Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> SVN-Revision: 42194 
Switch in Edimax 3G-6200n also require full switch reset, not only vlan definitions. Tested on Edimax 3G-6200n.

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>

SVN-Revision: 42194
ralink: clean up HAME profiles, remove unnecessary packages. 2014-08-18T13:09:46+00:00 John Crispin john@openwrt.org 2014-08-18T13:09:46+00:00 60bf96e3a09750dcbb2403ff32ae6f160f414214 Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> SVN-Revision: 42192 
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>

SVN-Revision: 42192
ramips: add mpr-a1 to default profile 2014-08-18T13:09:43+00:00 John Crispin john@openwrt.org 2014-08-18T13:09:43+00:00 a62e8bd14549f3545eda86ce596f1be08fefacd3 Add hame mpr-a1 to default ramips profile. Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> SVN-Revision: 42191 
Add hame mpr-a1 to default ramips profile.

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>

SVN-Revision: 42191
ramips: Hame: change LED name mpr-x -> hame 2014-08-18T13:09:39+00:00 John Crispin john@openwrt.org 2014-08-18T13:09:39+00:00 bb9a23aca2f35d81f14e2d90a586d890d545a70e Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> SVN-Revision: 42190 
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>

SVN-Revision: 42190
ramips: make use of the new board detection layer 2014-08-18T13:09:20+00:00 John Crispin john@openwrt.org 2014-08-18T13:09:20+00:00 0fc4383d6978ec3a5cd46a0bedf7ecbbb641c751 Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 42186 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 42186
ramips: add a workaround to fix failsafe on RT5350 2014-08-18T13:08:52+00:00 John Crispin john@openwrt.org 2014-08-18T13:08:52+00:00 3a9752bbd2bc00e407b5dcad21789720f40abf0e Due to TCP connections not working when VLAN is disabled, this is needed to get failsafe functional. Signed-off-by: Paul Fertser <fercerpav@gmail.com> SVN-Revision: 42179 
Due to TCP connections not working when VLAN is disabled, this is
needed to get failsafe functional.

Signed-off-by: Paul Fertser <fercerpav@gmail.com>

SVN-Revision: 42179
ramips: enable additional GPIOs on HAME MPR-A1 2014-08-18T13:08:48+00:00 John Crispin john@openwrt.org 2014-08-18T13:08:48+00:00 f80312613de08ff7dc2ba477cc3b34ce9fcdd17c According to the pcb tracing results[1] by anton.rad[2] MPR-A1s expose 6 unused GPIOs, only one of them working as configured in the current DTS. This patch enables GPIO22-26. Tested on hardware. [1] http://i.imgur.com/kHVW2Ox.jpg [2] https://forum.openwrt.org/viewtopic.php?pid=222698#p222698 Signed-off-by: Paul Fertser <fercerpav@gmail.com> SVN-Revision: 42178 
According to the pcb tracing results[1] by anton.rad[2] MPR-A1s expose
6 unused GPIOs, only one of them working as configured in the current
DTS. This patch enables GPIO22-26.

Tested on hardware.

[1] http://i.imgur.com/kHVW2Ox.jpg
[2] https://forum.openwrt.org/viewtopic.php?pid=222698#p222698

Signed-off-by: Paul Fertser <fercerpav@gmail.com>

SVN-Revision: 42178