mtk-20170518/target/linux/ramips, branch v17.01.1 MTK 20170518 : Mediatek SDK based on OpenWRT Barrier Breaker kernel: update kernel 4.4 to 4.4.61 2017-04-15T15:20:51+00:00 Jo-Philipp Wich jo@mein.io 2017-04-15T15:00:49+00:00 6ca5ccc62019cf9376b552c0635f4242dd4fae0f Signed-off-by: Jo-Philipp Wich <jo@mein.io> 
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
ramips: add RP-N53 pcie wireless eeprom 2017-04-12T08:13:40+00:00 Mathias Kresin dev@kresin.me 2017-04-09T07:14:52+00:00 f2f672c32ca32643c6985ff4f7f994934725cd40 Fix the PCIe 5GHz wireless by using the on flash eeprom/caldata. Disable the 2.4GHz band as this band has no antennas attached but is enabled in the eeprom/caldata. Fixes: FS#691 Signed-off-by: Mathias Kresin <dev@kresin.me> 
Fix the PCIe 5GHz wireless by using the on flash eeprom/caldata.
Disable the 2.4GHz band as this band has no antennas attached but is
enabled in the eeprom/caldata.

Fixes: FS#691

Signed-off-by: Mathias Kresin <dev@kresin.me>
ramips: fix WHR-600D eeprom dt property 2017-04-12T08:13:37+00:00 Mathias Kresin dev@kresin.me 2017-04-09T07:12:55+00:00 f3dc2ffdd4462dd08220fbafc4ac2971f7ef43b0 Fix the PCIe 5GHz wireless by using the ralink mtd-eeprom property as this board have a RT5592 and uses the rt2x00 driver. The mediathek device tree bindings do not work here. Fixes: FS#691 Fixes: d8dd207ea6f2 ("ramips: use the ralink,mtd-eeprom device tree property") Signed-off-by: Mathias Kresin <dev@kresin.me> 
Fix the PCIe 5GHz wireless by using the ralink mtd-eeprom property as
this board have a RT5592 and uses the rt2x00 driver. The mediathek
device tree bindings do not work here.

Fixes: FS#691

Fixes: d8dd207ea6f2 ("ramips: use the ralink,mtd-eeprom device tree property")
Signed-off-by: Mathias Kresin <dev@kresin.me>
kernel: update kernel 4.4 to 4.4.59 2017-04-02T12:37:49+00:00 Hauke Mehrtens hauke@hauke-m.de 2017-04-02T09:53:42+00:00 0dcc4d239da78bc20b091d50c097c386e0e61902 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> 
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
ramips: fix Linksys RE6500 switch port mapping 2017-03-07T16:39:34+00:00 Jo-Philipp Wich jo@mein.io 2017-03-07T16:38:30+00:00 f8e08ffd94ded1b3b3ae58566d130c2dfa71e531 Properly map the internal switch ports to the proper LAN1..LAN4 labels. Fixes #530. Signed-off-by: Jo-Philipp Wich <jo@mein.io> 
Properly map the internal switch ports to the proper LAN1..LAN4 labels.

Fixes #530.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
ramips: fix Airlink AR725W device title 2017-03-01T19:37:36+00:00 Mathias Kresin dev@kresin.me 2017-02-04T11:55:16+00:00 e19fbd32974dec3f01b8882413977aff0c7446c1 Gemtek is the ODM but the board was sold by Airlink101. Signed-off-by: Mathias Kresin <dev@kresin.me> 
Gemtek is the ODM but the board was sold by Airlink101.

Signed-off-by: Mathias Kresin <dev@kresin.me>
ramips: fix the number of uarts for MT7688 2017-02-16T08:54:30+00:00 Furong Xu xfr@outlook.com 2017-02-16T03:10:28+00:00 25b7295617cc6b2e317ef970d6d8d04ada49822c Same as MT7621 and MT7628, MT7688 allows up to 3 uarts Signed-off-by: Furong Xu <xfr@outlook.com> 
Same as MT7621 and MT7628, MT7688 allows up to 3 uarts

Signed-off-by: Furong Xu <xfr@outlook.com>
ramips: fix PWM pin mux conflict in dtsi 2017-02-16T08:54:17+00:00 Furong Xu xfr@outlook.com 2017-02-16T02:00:48+00:00 71ea3b481406cd44d2d94da60e6fdec5bc8a9eb9 GPIO18 and GPIO19 on OMEGA2(+) should be GPIO mode, enable PWM lead to a conflict [ 0.290633] rt2880-pinmux pinctrl: pin io18 already requested by pinctrl; cannot claim for 10005000.pwm [ 0.299722] rt2880-pinmux pinctrl: pin-18 (10005000.pwm) status -22 [ 0.305729] rt2880-pinmux pinctrl: could not request pin 18 (io18) from group pwm0 on device rt2880-pinmux [ 0.315131] mtk-pwm 10005000.pwm: Error applying setting, reverse things back Keep PWM disabled. Signed-off-by: Furong Xu <xfr@outlook.com> 
GPIO18 and GPIO19 on OMEGA2(+) should be GPIO mode, enable PWM lead to a conflict

[    0.290633] rt2880-pinmux pinctrl: pin io18 already requested by pinctrl; cannot claim for 10005000.pwm
[    0.299722] rt2880-pinmux pinctrl: pin-18 (10005000.pwm) status -22
[    0.305729] rt2880-pinmux pinctrl: could not request pin 18 (io18) from group pwm0  on device rt2880-pinmux
[    0.315131] mtk-pwm 10005000.pwm: Error applying setting, reverse things back

Keep PWM disabled.

Signed-off-by: Furong Xu <xfr@outlook.com>
ramips: added image size into dwr-512 DT 2017-02-13T09:25:19+00:00 Giuseppe Lippolis giu.lippolis@gmail.com 2017-02-11T17:53:33+00:00 e5060b32e5c662899971f450ea0983005e02ec57 Signed-off-by: Giuseppe Lippolis <giu.lippolis@gmail.com> 
Signed-off-by: Giuseppe Lippolis <giu.lippolis@gmail.com>
ramips: Correct switch configuration for Newifi D1 2017-02-13T09:25:19+00:00 Chuanhong Guo gch981213@gmail.com 2017-02-11T13:32:07+00:00 57dfbac6ff6934ce41cb40cda93caf93ad10053a Signed-off-by: Chuanhong Guo <gch981213@gmail.com> 
Signed-off-by: Chuanhong Guo <gch981213@gmail.com>