mtk-20170518/target/linux/ramips, branch v17.01.2 MTK 20170518 : Mediatek SDK based on OpenWRT Barrier Breaker ramips: add om-watchdog to rut5xx DEVICE_PACKAGES 2017-05-15T20:56:01+00:00 Steffen Weinreich steve@weinreich.org 2017-04-25T14:44:39+00:00 4bd98e9224cfd89a2d8de5759a7823964d89225f Add om-watchdog as default package for rut5xx. Signed-off-by: Steffen Weinreich <steve@weinreich.org> 
Add om-watchdog as default package for rut5xx.

Signed-off-by: Steffen Weinreich <steve@weinreich.org>
ramips: fixup-mac-address: add missing include 2017-05-10T22:54:06+00:00 Jo-Philipp Wich jo@mein.io 2017-05-10T22:50:48+00:00 7f3ec01069798064bcc0a32b3989cadd37d65fbd Add missing include of ramips.sh in order to import the missing ramips_board_name() procedure. Fixes FS#774. Signed-off-by: Jo-Philipp Wich <jo@mein.io> 
Add missing include of ramips.sh in order to import the missing
ramips_board_name() procedure.

Fixes FS#774.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
ramips: add factory firmware for Tp-Link C20i/C50 2017-05-05T18:00:57+00:00 Henryk Heisig hyniu@o2.pl 2017-05-05T15:07:28+00:00 86196830371c07c2b5721002f2ad500ca893076e TP-Link firmware doesn't accept sysupgrade.bin with metadata. Signed-off-by: Henryk Heisig <hyniu@o2.pl> 
TP-Link firmware doesn't accept sysupgrade.bin with metadata.

Signed-off-by: Henryk Heisig <hyniu@o2.pl>
ramips: enable ramdisk for mt7621 2017-05-03T23:03:25+00:00 Paul Spooren paul@spooren.de 2017-05-03T22:47:34+00:00 79cd14152c4478620eb0280fec9816f39e8a0dc5 Fixes #758 Signed-off-by: Paul Spooren <paul@spooren.de> 
Fixes #758

Signed-off-by: Paul Spooren <paul@spooren.de>
ramips: WN3000RPv3: do not setup switch 2017-04-28T15:10:01+00:00 Thibaut VARENE hacks@slashdirt.org 2017-02-12T16:11:08+00:00 8b9f7bd7bd911a8677b6fa8256ab521417f326bf The WN3000RPv3 is a repeater with a single ethernet port. Setting up the switch, even to disable it, is unnecessary and possibly confusing. Configure LAN as eth0 instead. Signed-off-by: Thibaut VARENE <hacks@slashdirt.org> 
The WN3000RPv3 is a repeater with a single ethernet port. Setting up the
switch, even to disable it, is unnecessary and possibly confusing.

Configure LAN as eth0 instead.

Signed-off-by: Thibaut VARENE <hacks@slashdirt.org>
ramips: add support for Sanlinking D240 2017-04-28T15:09:45+00:00 Kristian Evensen kristian.evensen@gmail.com 2017-02-04T20:28:52+00:00 49ce6d04b0fa56facd37924003df02b4ebf14aab The Sanlinking Technologies D240 (http://www.sanlinking.com/en/29-dual-4g-wifi-router.html) is basically the same device as the ZBT WE826, so adding support for it in LEDE is straight forward. The differences is that the D240 has two mini-PCIe slots (instead of one), blue LEDs and supports PoE. Specification: * CPU: MT7620A * 1x 10/100Mbps POE (802.3af/802.3at) Ethernet, 4x 10/100Mbps. * 16 MB Flash. * 128 MB RAM. * 1x USB 2.0 port. * 2x mini-PCIe slots. * 2x SIM slots. * 1x 2.4Ghz WIFI. * 1x button. Wifi, USB, switch and both mini-PCIe slots are working. I have not been able to test the SD card reader. The device comes pre-installed with an older version of OpenWRT, including Luci. In order to install LEDE, you need to follow the existing procedure for updating OpenWRT/LEDE using Luci. I.e., you need to access the UI and update the firmware using the sysupgrade-image. Remember to select that you do not want to keep existing settings. The default router address is 192.168.10.1 and username/password admin/root (at least on my devices). If you brick the device, the procedure for recovery is the same as for the WE826. Please see the wiki page for that device for instructions. Signed-off-by: Kristian Evensen <kristian.evensen@gmail.com> 
The Sanlinking Technologies D240
(http://www.sanlinking.com/en/29-dual-4g-wifi-router.html) is basically the same
device as the ZBT WE826, so adding support for it in LEDE is straight forward.
The differences is that the D240 has two mini-PCIe slots (instead of one), blue
LEDs and supports PoE.

Specification:
* CPU: MT7620A
* 1x 10/100Mbps POE (802.3af/802.3at) Ethernet, 4x 10/100Mbps.
* 16 MB Flash.
* 128 MB RAM.
* 1x USB 2.0 port.
* 2x mini-PCIe slots.
* 2x SIM slots.
* 1x 2.4Ghz WIFI.
* 1x button.

Wifi, USB, switch and both mini-PCIe slots are working. I have not been able to
test the SD card reader.

The device comes pre-installed with an older version of OpenWRT, including Luci.
In order to install LEDE, you need to follow the existing procedure for updating
OpenWRT/LEDE using Luci. I.e., you need to access the UI and update the firmware
using the sysupgrade-image. Remember to select that you do not want to keep
existing settings. The default router address is 192.168.10.1 and
username/password admin/root (at least on my devices).

If you brick the device, the procedure for recovery is the same as for the
WE826. Please see the wiki page for that device for instructions.

Signed-off-by: Kristian Evensen <kristian.evensen@gmail.com>
ramips: fix Sercomm NA930 compatible string 2017-04-28T15:09:36+00:00 Mathias Kresin dev@kresin.me 2017-02-02T21:35:59+00:00 7e2ad9cbb855abd660d72d2127b7440bd282db85 The Sercomm NA930 is not a mt7620a evaluation board and shouldn't use the eval board compatible string. Signed-off-by: Mathias Kresin <dev@kresin.me> 
The Sercomm NA930 is not a mt7620a evaluation board and shouldn't use
the eval board compatible string.

Signed-off-by: Mathias Kresin <dev@kresin.me>
ramips: remove Planex CS-QR10 sound device tree node 2017-04-28T15:09:29+00:00 Mathias Kresin dev@kresin.me 2017-02-02T21:34:53+00:00 88cc06abb7b40ae91f889b5038292f4ffe2e55d5 The comptible string is neither added by any LEDE patch nor exists in in the kernel. Drop the sound node which was obviously added accidentally with 9195d8da ("ramips: DTS rework"). Signed-off-by: Mathias Kresin <dev@kresin.me> 
The comptible string is neither added by any LEDE patch nor exists in
in the kernel. Drop the sound node which was obviously added
accidentally with 9195d8da ("ramips: DTS rework").

Signed-off-by: Mathias Kresin <dev@kresin.me>
ramips: cleanup SPI flash device tree properties usage 2017-04-28T15:09:24+00:00 Mathias Kresin dev@kresin.me 2017-02-02T21:11:23+00:00 f1f0b92a795e3f238912d5f03172627141af2375 Use only the jedec,spi-nor compatible string. Everything else either never worked or is only support to keep compatibility. Remove the linux,modalias property. It is obsolete since kernel 4.4. Signed-off-by: Mathias Kresin <dev@kresin.me> 
Use only the jedec,spi-nor compatible string. Everything else either
never worked or is only support to keep compatibility.

Remove the linux,modalias property. It is obsolete since kernel 4.4.

Signed-off-by: Mathias Kresin <dev@kresin.me>
ramips: remove DT pcie nodes for GL-MT300A/N 2017-04-28T15:09:18+00:00 Felix Fietkau nbd@nbd.name 2017-02-01T12:53:57+00:00 6aa0a85fc613970940777b36e1f633f6677e310a These devices don't have a secondary wifi chip Signed-off-by: Felix Fietkau <nbd@nbd.name> 
These devices don't have a secondary wifi chip

Signed-off-by: Felix Fietkau <nbd@nbd.name>