mtk-20170518/target/linux/ramips, branch v17.01.3 MTK 20170518 : Mediatek SDK based on OpenWRT Barrier Breaker kernel: update 4.4 to 4.4.89 2017-09-30T11:58:00+00:00 Hauke Mehrtens hauke@hauke-m.de 2017-09-30T11:38:39+00:00 720b0e2e2d2240b5bed33478ac4bbbf570d04560 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> 
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
ramips: fix hg255d LED status support 2017-09-13T06:07:39+00:00 David Yang mmyangfl@gmail.com 2017-09-09T13:16:11+00:00 4f162ac3ce3c37fa15561cc3de6a044ff3ace2bc Use the green power LED for boot status indication. Source: https://my.oschina.net/osbin/blog/278782 Para 3 Signed-off-by: David Yang <mmyangfl@gmail.com> 
Use the green power LED for boot status indication.

Source: https://my.oschina.net/osbin/blog/278782 Para 3

Signed-off-by: David Yang <mmyangfl@gmail.com>
kernel: update 4.4 to 4.4.83 2017-08-17T17:47:27+00:00 Kevin Darbyshire-Bryant kevin@darbyshire-bryant.me.uk 2017-08-17T16:58:24+00:00 4a1b87aba448fae648bf17830379fde11060927b Refresh patches. Minor update 704-phy-no-genphy-soft-reset.patch which was partially accepted upstream. Compile-tested on ar71xx. Runtime-tested on ar71xx. Fixes the following vulnerabilities: - CVE-2017-7533 (4.4.80) - CVE-2017-1000111 (4.4.82) - CVE-2017-1000112 (4.4.82) Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk> 
Refresh patches.
Minor update 704-phy-no-genphy-soft-reset.patch which was partially
accepted upstream.
Compile-tested on ar71xx.
Runtime-tested on ar71xx.

Fixes the following vulnerabilities:
- CVE-2017-7533 (4.4.80)
- CVE-2017-1000111 (4.4.82)
- CVE-2017-1000112 (4.4.82)

Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
ramips: fix WHR-1166D WAN port 2017-08-11T16:13:38+00:00 Mathias Kresin dev@kresin.me 2017-08-09T18:17:43+00:00 ff414fb575a43ada264186fe74e57fb605f20b7f By adding the ICPlus IP1001 phy driver an already set RGMII delay mode is reset during driver load. Set the rgmii rx delay to fix corrupt/no packages in case the WAN port negotiates to 1000MBit. Fixes: FS#670 Signed-off-by: Mathias Kresin <dev@kresin.me> 
By adding the ICPlus IP1001 phy driver an already set RGMII delay mode
is reset during driver load.

Set the rgmii rx delay to fix corrupt/no packages in case the WAN port
negotiates to 1000MBit.

Fixes: FS#670

Signed-off-by: Mathias Kresin <dev@kresin.me>
ramips: ArcherC50v1: fix wlan2g MAC address 2017-08-06T07:31:05+00:00 Thibaut VARENE hacks@slashdirt.org 2017-08-04T15:22:03+00:00 982612dba26f042f8b9a524996b0774d3c8e747a By default the wlan eprom contains the generic ralink MAC which is not the vendor (TP-Link) one. Based on OFW bootlog, it appears that addresses are decremented from the ethernet MAC. This patch fixes the MAC address for wlan2g in line with OFW. Signed-off-by: Thibaut VARENE <hacks@slashdirt.org> 
By default the wlan eprom contains the generic ralink MAC which is not
the vendor (TP-Link) one. Based on OFW bootlog, it appears that addresses
are decremented from the ethernet MAC.

This patch fixes the MAC address for wlan2g in line with OFW.

Signed-off-by: Thibaut VARENE <hacks@slashdirt.org>
ramips: fix Omnima MiniEMBWiFi image 2017-08-02T19:16:20+00:00 Mathias Kresin dev@kresin.me 2017-07-31T18:21:12+00:00 48798af6d224ae5c2e567be5b4ff88283ab9c208 Reference the Omnima MiniEMBWiFi device tree source file in the image build code. Otherwise the dts of the image processed before is used. Signed-off-by: Mathias Kresin <dev@kresin.me> 
Reference the Omnima MiniEMBWiFi device tree source file in the image
build code. Otherwise the dts of the image processed before is used.

Signed-off-by: Mathias Kresin <dev@kresin.me>
ramips: build HuaWei HG255D image 2017-08-02T19:16:20+00:00 Mathias Kresin dev@kresin.me 2017-07-31T18:19:14+00:00 1a050c83ac25b4c65b68f704fd70c9f90f4c25ed The code to build an image was disabled some time ago for unknown reasons albeit the image looks fine. Signed-off-by: Mathias Kresin <dev@kresin.me> 
The code to build an image was disabled some time ago for unknown
reasons albeit the image looks fine.

Signed-off-by: Mathias Kresin <dev@kresin.me>
ramips: add missing partitions 2017-08-02T19:16:20+00:00 Mathias Kresin dev@kresin.me 2017-07-31T16:00:35+00:00 57a8f36ac486f310fc9bdc7d394f36c11e083511 The partitions were lost during migration to device tree. Signed-off-by: Mathias Kresin <dev@kresin.me> 
The partitions were lost during migration to device tree.

Signed-off-by: Mathias Kresin <dev@kresin.me>
ralink: fix rcu_sched stalls on mt7621 2017-08-01T04:54:07+00:00 John Crispin john@phrozen.org 2017-08-01T04:53:38+00:00 6f4a903533361a2906a4d94ac6f597cd9c6c47bc there were 2 bugs *) core1 came up with a bad bogo mips, looks like the clock needed time to stabilize *) HPT frequency was not set making r4k timers not come up properly Backport of 9551d91b1d6 "ralink: fix rcu_sched stalls on mt7621". Signed-off-by: John Crispin <john@phrozen.org> 
there were 2 bugs
*) core1 came up with a bad bogo mips, looks like the clock needed time to stabilize
*) HPT frequency was not set making r4k timers not come up properly

Backport of 9551d91b1d6 "ralink: fix rcu_sched stalls on mt7621".

Signed-off-by: John Crispin <john@phrozen.org>
ramips: Archer C50v1: fix power led 2017-07-29T10:07:16+00:00 Thibaut VARENE hacks@slashdirt.org 2017-07-29T09:32:44+00:00 c407e6c2f29b96fe589370125595004e856f78d5 01_leds had a workaround for the power led to compensate for the inverted GPIO state. This patch was missing from my previous commit. Signed-off-by: Thibaut VARENE <hacks@slashdirt.org> [add the power led default-state which was omitted in the last commit by me] Signed-off-by: Mathias Kresin <dev@kresin.me> 
01_leds had a workaround for the power led to compensate for the
inverted GPIO state. This patch was missing from my previous commit.

Signed-off-by: Thibaut VARENE <hacks@slashdirt.org>
[add the power led default-state which was omitted in the last commit
by me]
Signed-off-by: Mathias Kresin <dev@kresin.me>