mtk-20170518/target/linux/ramips, branch v17.01.4 MTK 20170518 : Mediatek SDK based on OpenWRT Barrier Breaker ramips: fix compile warning in MT7621 NAND driver 2017-10-16T10:18:19+00:00 Felix Fietkau nbd@nbd.name 2017-10-16T10:07:31+00:00 e6fd17d04c7d738598414c55cd091f7fb9c6567a Signed-off-by: Felix Fietkau <nbd@nbd.name> 
Signed-off-by: Felix Fietkau <nbd@nbd.name>
ramips: fix typo in MT7621 NAND driver 2017-10-16T10:18:19+00:00 Felix Fietkau nbd@nbd.name 2017-10-16T10:15:08+00:00 2e9f3c6225ffbb67862abbb503c4d77d691edaa3 Signed-off-by: Felix Fietkau <nbd@nbd.name> 
Signed-off-by: Felix Fietkau <nbd@nbd.name>
mt76: sync with version 878456caf60d from master 2017-10-13T09:56:25+00:00 Felix Fietkau nbd@nbd.name 2017-10-12T09:49:00+00:00 c1023c8075b0590390020d65fd077b908cefad63 Backport required DT changes from commit dabdd123c90c. Significantly improves stability and performance for MT76x2 and MT7603 Signed-off-by: Felix Fietkau <nbd@nbd.name> 
Backport required DT changes from commit dabdd123c90c.
Significantly improves stability and performance for MT76x2 and MT7603

Signed-off-by: Felix Fietkau <nbd@nbd.name>
ramips: mt7620: do not pad sysupgrade Archer images 2017-10-04T20:22:56+00:00 Thibaut VARENE hacks@slashdirt.org 2017-08-02T14:28:16+00:00 f9a849ca84f596aafd7c167b2410ec5446c84784 The current makefile unnecessarily pads sysupgrade image for Archer devices. This has three implications: 1. higher risk of OOM when uploading the binary image to the device 2. much slower upgrade due to time wasted erasing and writing padding 3. grows image beyond available flash size if metadata are appended This is already fixed in master, albeit in a completely different way (the whole target have been reworked) Fixes: FS#1025, FS#1039 Signed-off-by: Thibaut VARENE <hacks@slashdirt.org> 
The current makefile unnecessarily pads sysupgrade image for Archer devices.

This has three implications:
1. higher risk of OOM when uploading the binary image to the device
2. much slower upgrade due to time wasted erasing and writing padding
3. grows image beyond available flash size if metadata are appended

This is already fixed in master, albeit in a completely different way (the
whole target have been reworked)

Fixes: FS#1025, FS#1039

Signed-off-by: Thibaut VARENE <hacks@slashdirt.org>
kernel: update 4.4 to 4.4.89 2017-09-30T11:58:00+00:00 Hauke Mehrtens hauke@hauke-m.de 2017-09-30T11:38:39+00:00 720b0e2e2d2240b5bed33478ac4bbbf570d04560 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> 
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
ramips: fix hg255d LED status support 2017-09-13T06:07:39+00:00 David Yang mmyangfl@gmail.com 2017-09-09T13:16:11+00:00 4f162ac3ce3c37fa15561cc3de6a044ff3ace2bc Use the green power LED for boot status indication. Source: https://my.oschina.net/osbin/blog/278782 Para 3 Signed-off-by: David Yang <mmyangfl@gmail.com> 
Use the green power LED for boot status indication.

Source: https://my.oschina.net/osbin/blog/278782 Para 3

Signed-off-by: David Yang <mmyangfl@gmail.com>
kernel: update 4.4 to 4.4.83 2017-08-17T17:47:27+00:00 Kevin Darbyshire-Bryant kevin@darbyshire-bryant.me.uk 2017-08-17T16:58:24+00:00 4a1b87aba448fae648bf17830379fde11060927b Refresh patches. Minor update 704-phy-no-genphy-soft-reset.patch which was partially accepted upstream. Compile-tested on ar71xx. Runtime-tested on ar71xx. Fixes the following vulnerabilities: - CVE-2017-7533 (4.4.80) - CVE-2017-1000111 (4.4.82) - CVE-2017-1000112 (4.4.82) Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk> 
Refresh patches.
Minor update 704-phy-no-genphy-soft-reset.patch which was partially
accepted upstream.
Compile-tested on ar71xx.
Runtime-tested on ar71xx.

Fixes the following vulnerabilities:
- CVE-2017-7533 (4.4.80)
- CVE-2017-1000111 (4.4.82)
- CVE-2017-1000112 (4.4.82)

Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
ramips: fix WHR-1166D WAN port 2017-08-11T16:13:38+00:00 Mathias Kresin dev@kresin.me 2017-08-09T18:17:43+00:00 ff414fb575a43ada264186fe74e57fb605f20b7f By adding the ICPlus IP1001 phy driver an already set RGMII delay mode is reset during driver load. Set the rgmii rx delay to fix corrupt/no packages in case the WAN port negotiates to 1000MBit. Fixes: FS#670 Signed-off-by: Mathias Kresin <dev@kresin.me> 
By adding the ICPlus IP1001 phy driver an already set RGMII delay mode
is reset during driver load.

Set the rgmii rx delay to fix corrupt/no packages in case the WAN port
negotiates to 1000MBit.

Fixes: FS#670

Signed-off-by: Mathias Kresin <dev@kresin.me>
ramips: ArcherC50v1: fix wlan2g MAC address 2017-08-06T07:31:05+00:00 Thibaut VARENE hacks@slashdirt.org 2017-08-04T15:22:03+00:00 982612dba26f042f8b9a524996b0774d3c8e747a By default the wlan eprom contains the generic ralink MAC which is not the vendor (TP-Link) one. Based on OFW bootlog, it appears that addresses are decremented from the ethernet MAC. This patch fixes the MAC address for wlan2g in line with OFW. Signed-off-by: Thibaut VARENE <hacks@slashdirt.org> 
By default the wlan eprom contains the generic ralink MAC which is not
the vendor (TP-Link) one. Based on OFW bootlog, it appears that addresses
are decremented from the ethernet MAC.

This patch fixes the MAC address for wlan2g in line with OFW.

Signed-off-by: Thibaut VARENE <hacks@slashdirt.org>
ramips: fix Omnima MiniEMBWiFi image 2017-08-02T19:16:20+00:00 Mathias Kresin dev@kresin.me 2017-07-31T18:21:12+00:00 48798af6d224ae5c2e567be5b4ff88283ab9c208 Reference the Omnima MiniEMBWiFi device tree source file in the image build code. Otherwise the dts of the image processed before is used. Signed-off-by: Mathias Kresin <dev@kresin.me> 
Reference the Omnima MiniEMBWiFi device tree source file in the image
build code. Otherwise the dts of the image processed before is used.

Signed-off-by: Mathias Kresin <dev@kresin.me>