mtk-20170518/target/linux/x86/base-files, branch v17.01.2

Add missing APU1 reference to x86 board.d

2017-06-06T21:02:20+00:00

x86 board.d only contains a case for the APU2, not the APU1. This
causes, for example, network configuration not to be created correctly.
Even though the APU1 seems to reaching EOL, there a still a lot of them
out there.

The APU1 and APU2 is configured in the same way and this patch should
also be considered for stable, as the error also exists there.

Signed-off-by: Kristian Evensen

x86: Add board configs for the PC Engines APU2

2017-02-17T09:29:24+00:00

This adds the default LED and network settings for the PC Engines APU2
when running under the x86 target.

[dwmw2: Change Ethernet port setup]
Signed-off-by: Chris Blake

x86: Enable DIAG LED on Geos

2017-02-17T09:28:52+00:00

Based on a patch from Chris Blake , except let's
do it by using the LED configuration instead of hard-coding it for each
board type. And try using /bin/board_detect to do the default behaviour,
on the first boot where the config hasn't yet been generated.

Signed-off-by: David Woodhouse

x86: Move Traverse Geos configs into x86 base-files

2017-02-17T09:28:45+00:00

This change moves the files in 657418d to the root of the x86 target.
This is done in preperation for adding more devices under other
subtargets.

CC: David Woodhouse 

Signed-off-by: Chris Blake

x86: fix sysupgrades on disks with 4k block size

2017-01-25T07:14:59+00:00

Even when the disk uses 4k blocks, the partition table still uses units
of 512 byte sectors. Always use ibs=512 for the offsets

Signed-off-by: Felix Fietkau

x86/generic: add xen DomU support

2017-01-24T12:30:39+00:00

Copy the relevant config options from the xen_domu subtarget

Signed-off-by: Felix Fietkau

base-files: export x86 platform upgrade functions to common.sh

2017-01-05T10:09:14+00:00

Signed-off-by: Yousong Zhou

x86: move sysupgrade.tgz only if it exists

2017-01-05T10:09:13+00:00

To squash error messages at boot time

    mv: can't rename '/mnt/sysupgrade.tgz': No such file or directory

Signed-off-by: Yousong Zhou

x86: use sysfs DMI information to populate sysinfo

2016-06-06T13:18:11+00:00

Use the DMI data available in sysfs to extract manufacturer and model info
and write it to /tmp/sysinfo/.

The data will be picked up by board_detect and can be used by e.g. LuCI to
display a more appropriate model description.

On an APU board the files will contain the following values:

    # cat /tmp/sysinfo/model
    PC Engines APU

    # cat /tmp/sysinfo/board_name
    pc-engines-apu

Signed-off-by: Jo-Philipp Wich

x86: generalize partition discovery for sysupgrade

2016-05-24T11:30:58+00:00

Generalize the partition discovery in sysupgrade in order to fix sysupgrade
and config backup/recovery on MMC block devices which use a different naming
scheme compared to mtdblock or sd* devices.

The change also adds the find applet to the ramdisk utilities so that upgrade
code can rely on it.

The commit is based on the initial submission by Russell Senior at
http://patchwork.ozlabs.org/patch/625440/ .

Signed-off-by: Russell Senior 
Signed-off-by: Jo-Philipp Wich