mtk-20170518/target/linux/x86, branch v17.01.2 MTK 20170518 : Mediatek SDK based on OpenWRT Barrier Breaker Add missing APU1 reference to x86 board.d 2017-06-06T21:02:20+00:00 Kristian Evensen kristian.evensen@gmail.com 2017-06-05T08:24:02+00:00 443d705e381ef214191a2a427f3c1b29f4c41456 x86 board.d only contains a case for the APU2, not the APU1. This causes, for example, network configuration not to be created correctly. Even though the APU1 seems to reaching EOL, there a still a lot of them out there. The APU1 and APU2 is configured in the same way and this patch should also be considered for stable, as the error also exists there. Signed-off-by: Kristian Evensen <kristian.evensen@gmail.com> 
x86 board.d only contains a case for the APU2, not the APU1. This
causes, for example, network configuration not to be created correctly.
Even though the APU1 seems to reaching EOL, there a still a lot of them
out there.

The APU1 and APU2 is configured in the same way and this patch should
also be considered for stable, as the error also exists there.

Signed-off-by: Kristian Evensen <kristian.evensen@gmail.com>
x86: disable X2APIC support for legacy subtargets 2017-06-01T23:52:14+00:00 Jo-Philipp Wich jo@mein.io 2017-06-01T23:47:47+00:00 b78bcdf6195c6ead5095489e8bb5e85eece44622 Explicitely disable X2APIC support on legacy targets since the targeted processor types do not support it anyway there. Fixes FS#285. Signed-off-by: Jo-Philipp Wich <jo@mein.io> 
Explicitely disable X2APIC support on legacy targets since the targeted
processor types do not support it anyway there.

Fixes FS#285.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
x86: enable 4G high memory support for generic (32bit) subtarget 2017-04-27T13:26:48+00:00 Jo-Philipp Wich jo@mein.io 2017-04-27T13:26:48+00:00 af1d1ebdda59602cbb61c84a103a1149a054a1b4 This is required to fully support a number of 32bit x86 systems equipped with more than one GB ram, e.g. certain Atom CPU machines. Ref: https://forum.lede-project.org/t/17-01-1-x86-doesnt-detect-all-of-the-ram/3295 Signed-off-by: Jo-Philipp Wich <jo@mein.io> 
This is required to fully support a number of 32bit x86 systems equipped
with more than one GB ram, e.g. certain Atom CPU machines.

Ref: https://forum.lede-project.org/t/17-01-1-x86-doesnt-detect-all-of-the-ram/3295

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
x86/64: Enable GPIO sysfs & GPIO LED support 2017-03-01T19:37:35+00:00 Chris Blake chrisrblake93@gmail.com 2017-01-23T08:12:34+00:00 bc443b105269192d336cacfcc062f61484d43216 The following changes enables GPIO sysfs as well as the LEDS_GPIO option within the kernel. This is required to enable LEDs over a GPIO interface. Signed-off-by: Chris Blake <chrisrblake93@gmail.com> 
The following changes enables GPIO sysfs as well as the LEDS_GPIO option
within the kernel. This is required to enable LEDs over a GPIO
interface.

Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
x86: Add Geos profile for Geode subtarget 2017-02-17T09:30:30+00:00 David Woodhouse dwmw2@infradead.org 2017-02-15T16:11:12+00:00 63a8424702fa192c0977e0180362e19260f19677 This makes the Geode images actually useful again. The Geos profile should include the relevant hardware for that board, and the Default profile adds the via-rhine adapter which seems to have been present in the net5501 and alix targets killed in commit 9e0759ea265 ("x86: merge all geode based subtargets into one"). Signed-off-by: David Woodhouse <dwmw2@infradead.org> 
This makes the Geode images actually useful again. The Geos profile
should include the relevant hardware for that board, and the Default
profile adds the via-rhine adapter which seems to have been present in
the net5501 and alix targets killed in commit 9e0759ea265 ("x86: merge
all geode based subtargets into one").

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
x86: Add board configs for the PC Engines APU2 2017-02-17T09:29:24+00:00 Chris Blake chrisrblake93@gmail.com 2017-02-13T08:01:14+00:00 808f6a500cbff617426105b0a40d4d0832319851 This adds the default LED and network settings for the PC Engines APU2 when running under the x86 target. [dwmw2: Change Ethernet port setup] Signed-off-by: Chris Blake <chrisrblake93@gmail.com> 
This adds the default LED and network settings for the PC Engines APU2
when running under the x86 target.

[dwmw2: Change Ethernet port setup]
Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
x86: Enable DIAG LED on Geos 2017-02-17T09:28:52+00:00 David Woodhouse dwmw2@infradead.org 2017-02-13T13:38:33+00:00 6d6db65d8294a12265f9ac75dee31d98767946c9 Based on a patch from Chris Blake <chrisrblake93@gmail.com>, except let's do it by using the LED configuration instead of hard-coding it for each board type. And try using /bin/board_detect to do the default behaviour, on the first boot where the config hasn't yet been generated. Signed-off-by: David Woodhouse <dwmw2@infradead.org> 
Based on a patch from Chris Blake <chrisrblake93@gmail.com>, except let's
do it by using the LED configuration instead of hard-coding it for each
board type. And try using /bin/board_detect to do the default behaviour,
on the first boot where the config hasn't yet been generated.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
x86: Move Traverse Geos configs into x86 base-files 2017-02-17T09:28:45+00:00 Chris Blake chrisrblake93@gmail.com 2017-02-13T08:01:13+00:00 bd5b5c749a3d5fd7ef4ec8f03330dfef445db218 This change moves the files in 657418d to the root of the x86 target. This is done in preperation for adding more devices under other subtargets. CC: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Chris Blake <chrisrblake93@gmail.com> 
This change moves the files in 657418d to the root of the x86 target.
This is done in preperation for adding more devices under other
subtargets.

CC: David Woodhouse <dwmw2@infradead.org>

Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
x86: Add configuration back for Traverse Geos 2017-02-17T09:28:39+00:00 David Woodhouse dwmw2@infradead.org 2017-02-10T11:41:30+00:00 06e0c30336d842c8337ca0fb24a9222b9857a1d7 When we merged all the Geode boards into one generic target, the default network and LED configuration was lost. Put it back. Fixes: 9e0759ea2653 ("x86: merge all geode based subtargets into one") Signed-off-by: David Woodhouse <dwmw2@infradead.org> 
When we merged all the Geode boards into one generic target, the default
network and LED configuration was lost. Put it back.

Fixes: 9e0759ea2653 ("x86: merge all geode based subtargets into one")
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Kernel: bump to 4.4.44 2017-02-06T19:13:06+00:00 Stijn Segers francesco.borromini@inventati.org 2017-01-21T17:30:10+00:00 ee3067c588139ef60a72f5fecac979580d3651e3 Bump kernel to 4.4.44. Compile-tested on ar71xx, ramips/mt7621 and x86/64. .44 has been run-tested on the 17.01 branch here on ar71xx and mt7621. Signed-off-by: Stijn Segers <francesco.borromini@inventati.org> (cherry picked from commit 20996edd68b8a0b139bdb36b3aafa29c037d4bda) Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> Conflicts: target/linux/ar71xx/patches-4.4/920-usb-chipidea-AR933x-platform-support.patch target/linux/ar71xx/patches-4.4/930-chipidea-pullup.patch 
Bump kernel to 4.4.44. Compile-tested on ar71xx, ramips/mt7621 and x86/64.

.44 has been run-tested on the 17.01 branch here on ar71xx and mt7621.

Signed-off-by: Stijn Segers <francesco.borromini@inventati.org>
(cherry picked from commit 20996edd68b8a0b139bdb36b3aafa29c037d4bda)
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>

Conflicts:
	target/linux/ar71xx/patches-4.4/920-usb-chipidea-AR933x-platform-support.patch
	target/linux/ar71xx/patches-4.4/930-chipidea-pullup.patch