mtk-20170518/target/linux/x86, branch v17.01.3

x86: add missing kernel config symbols to Geode target

2017-07-12T23:25:26+00:00

Signed-off-by: Jo-Philipp Wich

x86: enable ACPI support for the Geode subtarget

2017-07-12T20:40:22+00:00

Backport of 9b940fe "x86: enable ACPI support for the Geode subtarget".

Fixes FS#577.

Signed-off-by: Jo-Philipp Wich

Add missing APU1 reference to x86 board.d

2017-06-06T21:02:20+00:00

x86 board.d only contains a case for the APU2, not the APU1. This
causes, for example, network configuration not to be created correctly.
Even though the APU1 seems to reaching EOL, there a still a lot of them
out there.

The APU1 and APU2 is configured in the same way and this patch should
also be considered for stable, as the error also exists there.

Signed-off-by: Kristian Evensen

x86: disable X2APIC support for legacy subtargets

2017-06-01T23:52:14+00:00

Explicitely disable X2APIC support on legacy targets since the targeted
processor types do not support it anyway there.

Fixes FS#285.

Signed-off-by: Jo-Philipp Wich

x86: enable 4G high memory support for generic (32bit) subtarget

2017-04-27T13:26:48+00:00

This is required to fully support a number of 32bit x86 systems equipped
with more than one GB ram, e.g. certain Atom CPU machines.

Ref: https://forum.lede-project.org/t/17-01-1-x86-doesnt-detect-all-of-the-ram/3295

Signed-off-by: Jo-Philipp Wich

x86/64: Enable GPIO sysfs & GPIO LED support

2017-03-01T19:37:35+00:00

The following changes enables GPIO sysfs as well as the LEDS_GPIO option
within the kernel. This is required to enable LEDs over a GPIO
interface.

Signed-off-by: Chris Blake

x86: Add Geos profile for Geode subtarget

2017-02-17T09:30:30+00:00

This makes the Geode images actually useful again. The Geos profile
should include the relevant hardware for that board, and the Default
profile adds the via-rhine adapter which seems to have been present in
the net5501 and alix targets killed in commit 9e0759ea265 ("x86: merge
all geode based subtargets into one").

Signed-off-by: David Woodhouse

x86: Add board configs for the PC Engines APU2

2017-02-17T09:29:24+00:00

This adds the default LED and network settings for the PC Engines APU2
when running under the x86 target.

[dwmw2: Change Ethernet port setup]
Signed-off-by: Chris Blake

x86: Enable DIAG LED on Geos

2017-02-17T09:28:52+00:00

Based on a patch from Chris Blake , except let's
do it by using the LED configuration instead of hard-coding it for each
board type. And try using /bin/board_detect to do the default behaviour,
on the first boot where the config hasn't yet been generated.

Signed-off-by: David Woodhouse

x86: Move Traverse Geos configs into x86 base-files

2017-02-17T09:28:45+00:00

This change moves the files in 657418d to the root of the x86 target.
This is done in preperation for adding more devices under other
subtargets.

CC: David Woodhouse 

Signed-off-by: Chris Blake