Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

The following patch was integrated upstream:
 * target/linux/generic/patches-4.4/005-ext4-fix-check-to-prevent-initializing-reserved-inod.patch

This fixes tries to work around the following security problems:
 * CVE-2018-3620 L1 Terminal Fault OS, SMM related aspects
 * CVE-2018-3646 L1 Terminal Fault Virtualization related aspects

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

This fixes kernel hang when booting on BCM4718A1 (& probably BCM4717A1).

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
(cherry picked from commit 4c1aa64b4d804e77dfaa8d53e5ef699fcced4b18)
Fixes: aaecfecdcde5 ("kernel: bump kernel 4.4 to version 4.4.139")

The broken check would detect a newly generated root filesystem as corrupt
under certain circumstances, in some cases actually currupting the it while
trying to handle the error condition.

This is a regression introduced in kernel 4.4.140. The 4.14.y stable series
has already received this fix, while it is still pending for 4.4.y and
4.9.y.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>

target/linux/ar71xx/patches-4.4/103-MIPS-ath79-fix-register-address-in-ath79_ddr_wb_flus.patch
has been applied upstream; the two deleted brcm2708 patches have been
useless even before (as the second one only reverted the first one).

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>

The WDR4900v1 uses the P1040 SoC, so the device tree pulls in the
definition for the related P1010 SoC.  However, the P1040 lacks the
CAAM/SEC4 hardware crypto accelerator which the P1010 device tree
defines.  If left defined, this causes the CAAM drivers (if present) to
attempt to use the non-existent device, making various crypto-related
operations (e.g. macsec and ipsec) fail.

This commit overrides the incorrect dt node definition in the included
file.

See also:
 - https://bugs.openwrt.org/index.php?do=details&task_id=1262
 - https://community.nxp.com/thread/338432#comment-474107

Signed-off-by: Tim Small <tim@seoss.co.uk>
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
(cherry picked from commit e97aaf483c71fd5e3072ec2dce53354fc97357c9)

The original vendor's driver programmed the dma controller's
AHB HPROT values to enable bufferable, privileged mode. This
along with the "same priorty for both channels" fixes the
freezes according to @takimata, @And.short, that have been
reported on the forum by @ticerex.

Furtheremore, @takimata reported that the patch also improved
the performance of the HDDs considerably:
|<https://forum.lede-project.org/t/wd-mybook-live-duo-two-disks/16195/55>
|It seems your patch unleashed the full power of the SATA port.
|Where I was previously hitting a really hard limit at around
|82 MB/s for reading and 27 MB/s for writing, I am now getting this:
|
|root@OpenWrt:/mnt# time dd if=/dev/zero of=tempfile bs=1M count=1024
|1024+0 records in
|1024+0 records out
|real    0m 13.65s
|user    0m 0.01s
|sys     0m 11.89s
|
|root@OpenWrt:/mnt# time dd if=tempfile of=/dev/null bs=1M count=1024
|1024+0 records in
|1024+0 records out
|real    0m 8.41s
|user    0m 0.01s
|sys     0m 4.70s
|
|This means: 121 MB/s reading and 75 MB/s writing!
|
|[...]
|
|The drive is a WD Green WD10EARX taken from an older MBL Single.
|I repeated the test a few times with even larger files to rule out
|any caching, I'm still seeing the same great performance. OpenWrt is
|now completely on par with the original MBL firmware's performance.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>

These two patches:
        target/linux/ar71xx/patches-4.4/403-mtd_fix_cfi_cmdset_0002_status_check.patch
        target/linux/ramips/patches-4.4/0036-mtd-fix-cfi-cmdset-0002-erase-status-check.patch
are replaced by upstream commit 242dbd2b3df ("mtd: cfi_cmdset_0002:
Change erase functions to check chip good only")

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>