mtk-20170518/tools/firmware-utils/src, branch v17.01.0-rc2 MTK 20170518 : Mediatek SDK based on OpenWRT Barrier Breaker firmware-utils: tplink-safeloader: add support for TP-Link WBS210/510 1.2 2017-01-05T15:01:17+00:00 Matthias Schiffer mschiffer@universe-factory.net 2017-01-05T15:01:17+00:00 2ee3e8dd42272f4109830cd26a7fd6f1231ddae8 Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> 
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
ramips: Add support to TP-Link Archer MR200 2016-12-22T14:03:30+00:00 Henryk Heisig hyniu@o2.pl 2016-09-24T19:41:43+00:00 c8043137bbd323b1490ae8613eab915ba9c138ee CPU: MT7620N 580MHz Flash: 8MB RAM: 64MB build-in modem 3G/4G four ethernet port 10/100Mbps Signed-off-by: Henryk Heisig <hyniu@o2.pl> 
CPU: MT7620N 580MHz
Flash: 8MB
RAM: 64MB
build-in modem 3G/4G
four ethernet port 10/100Mbps

Signed-off-by: Henryk Heisig <hyniu@o2.pl>
firmware-utils/tplink-safeloader: add support for TP-Link RE450 2016-12-22T13:50:05+00:00 Radek Dostál rd@radekdostal.com 2016-12-15T19:41:09+00:00 5515edae9f24be2a8c065bca7eb0de264ee4ed22 Signed-off-by: Radek Dostál <rd@radekdostal.com> [Jo-Philipp Wich: use .support_trail member] Signed-off-by: Jo-Philipp Wich <jo@mein.io> 
Signed-off-by: Radek Dostál <rd@radekdostal.com>
[Jo-Philipp Wich: use .support_trail member]
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
firmware-utils: kernel image generator for TP-Link RE450 2016-12-22T13:50:05+00:00 Tal Keren kooolk@gmail.com 2016-01-07T00:40:47+00:00 0d9d980ecd6fce5708003ed16c3238a680b1b16e The firmware image that is used in TP-Link RE450 (and some more devices from the RE series) is tplink-safeloader. In the kernel partition, the kernel is compressed in a regular tp-link firmware that is just used for booting. Since it is only used for compressing and booting, only four fields are filled in the header: Vendor, version, kernel load address and kernel entry point. mktplinkfw-kernel is a simpler version of mktpolinkfw that generate such images. It also specifies the hardware id (as it is in the product info section), so when doing a sysupgrade - the existing code will check for hardware compatibility. Signed-off-by: Tal Keren <kooolk@gmail.com> [rd@radekdostal.com: add build target to .../image/tp-link.mk] Signed-off-by: Radek Dostál <rd@radekdostal.com> 
The firmware image that is used in TP-Link RE450 (and some more devices from
the RE series) is tplink-safeloader.
In the kernel partition, the kernel is compressed in a regular tp-link
firmware that is just used for booting. Since it is only used for compressing
and booting, only four fields are filled in the header:
Vendor, version, kernel load address and kernel entry point.
mktplinkfw-kernel is a simpler version of mktpolinkfw that generate such
images. It also specifies the hardware id (as it is in the product info
section), so when doing a sysupgrade - the existing code will check for
hardware compatibility.

Signed-off-by: Tal Keren <kooolk@gmail.com>
[rd@radekdostal.com: add build target to .../image/tp-link.mk]
Signed-off-by: Radek Dostál <rd@radekdostal.com>
firmware-utils: add support for TL-WR1043ND v4 to mktplinkfw and tplink-safeloader 2016-12-20T13:38:48+00:00 Matthias Schiffer mschiffer@universe-factory.net 2016-12-10T19:45:50+00:00 51740990cd1d5375a566454e692b479986cba958 The TL-WR1043ND v4 uses a kernel image with a mktplinkfw header inside the os-image partition of a tplink-safeloader image. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> 
The TL-WR1043ND v4 uses a kernel image with a mktplinkfw header inside the
os-image partition of a tplink-safeloader image.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
firmware-utils/tplink-safeloader: refactor code for further board support 2016-12-20T13:38:48+00:00 Jo-Philipp Wich jo@mein.io 2016-08-24T17:42:19+00:00 fff6443b5bf62f70b44ce5270129e8ecd7b9a25c In order to make it easier to add new boards in the future, refactor the code to describe the image layouts of supported boards in a struct array and alter the image generation routines to figure out the sysupgrade partitions automatically. Signed-off-by: Jo-Philipp Wich <jo@mein.io> 
In order to make it easier to add new boards in the future, refactor the code
to describe the image layouts of supported boards in a struct array and alter
the image generation routines to figure out the sysupgrade partitions
automatically.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
firmware-utils/tplink-safeloader: make vendor data optional 2016-12-20T13:38:47+00:00 Jo-Philipp Wich jo@mein.io 2016-08-24T07:30:56+00:00 d58e8a90769e2f65e26960555c972237a18068f5 Restructure the code a bit to allow for omitting vendor data when generating factory images. Signed-off-by: Jo-Philipp Wich <jo@mein.io> 
Restructure the code a bit to allow for omitting vendor data when generating
factory images.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
firmware-utils: add E2100L support to addpattern.c 2016-12-14T17:42:48+00:00 Jo-Philipp Wich jo@mein.io 2016-12-02T10:39:42+00:00 38ebd1d133e247d80106a71af64587af8dc198c2 Based on OpenWrt PR#250 Signed-off-by: Jo-Philipp Wich <jo@mein.io> 
Based on OpenWrt PR#250

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
firmware-utils: tplink-safeloader: update support lists for CPE210/510/... 2016-12-12T12:46:58+00:00 Matthias Schiffer mschiffer@universe-factory.net 2016-12-11T17:00:13+00:00 d1a2c3f9b1f79baca2d16b8bf8bd6c409ee56e2e Adds support for new EU and US variants; removes a few strings that were never actually used and have been removed from the stock firmwares. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> 
Adds support for new EU and US variants; removes a few strings that were
never actually used and have been removed from the stock firmwares.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
firmware-utils: replace md5 code with Alexander Peslyak's implementation 2016-11-28T06:52:31+00:00 Rafał Miłecki rafal@milecki.pl 2016-11-19T20:09:53+00:00 cb7ab730c76c47bbcb1f8ba4cd8df8d4b1071e55 Our current implementation is pretty old and uses some pre-standard/old ANSI C style that triggers warnings like: warning: call to function 'MD5_Init' without a real prototype [-Wunprototyped-calls] This is caused by declarations specified in a following way: src/md5.h:60:6: note: 'MD5_Init' was declared here void MD5_Init (); Having these warnings makes it harded to notice real problems. We could try hiding them but it makes more sense to just use a cleaner code. Another tiny gain from this switch is slightly reduced binary size, on x86_64 tplink-safeloader's size 48104 became 48003. The new code is public domain, uses "heavily cut-down BSD license". Signed-off-by: Rafał Miłecki <rafal@milecki.pl> 
Our current implementation is pretty old and uses some pre-standard/old
ANSI C style that triggers warnings like:
warning: call to function 'MD5_Init' without a real prototype [-Wunprototyped-calls]

This is caused by declarations specified in a following way:
src/md5.h:60:6: note: 'MD5_Init' was declared here
 void MD5_Init ();

Having these warnings makes it harded to notice real problems. We could
try hiding them but it makes more sense to just use a cleaner code.
Another tiny gain from this switch is slightly reduced binary size, on
x86_64 tplink-safeloader's size 48104 became 48003.

The new code is public domain, uses "heavily cut-down BSD license".

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>