mtk-20170518/tools/firmware-utils/src, branch v18.06.0-rc1 MTK 20170518 : Mediatek SDK based on OpenWRT Barrier Breaker ar71xx: add support for TP-LINK Archer C7 v5 2018-06-21T05:02:51+00:00 Arvid E. Picciani aep@exys.org 2018-04-16T11:18:37+00:00 4e9fa569b0279c81aa9ca96a6669bc08115d4227 TP-Link Archer C7 v5 is a dual-band AC1750 router, based on Qualcomm/Atheros QCA9563+QCA9880. Specification: - 750/400/250 MHz (CPU/DDR/AHB - 128 MB of RAM (DDR2) - 16 MB of FLASH (SPI NOR) - 3T3R 2.4 GHz - 3T3R 5 GHz - 5x 10/100/1000 Mbps Ethernet - 10x LED, 2x button - UART header on PCB Flash instruction: 1. Upload lede-ar71xx-generic-archer-c7-v5-squashfs-factory.bin via Web interface Flash instruction using TFTP recovery: 1. Set PC to fixed ip address 192.168.0.66 2. Download lede-ar71xx-generic-archer-c7-v5-squashfs-factory.bin and rename it to ArcherC7v5_tp_recovery.bin 3. Start a tftp server with the file tp_recovery.bin in its root directory 4. Turn off the router 5. Press and hold Reset button 6. Turn on router with the reset button pressed and wait ~15 seconds 7. Release the reset button and after a short time the firmware should be transferred from the tftp server 8. Wait ~30 second to complete recovery. Signed-off-by: Arvid E. Picciani <aep@exys.org> (cherry picked from commit bf39d5594b3c8f9409e6d9408a1f370c9f18d0dd) 
TP-Link Archer C7 v5 is a dual-band AC1750 router, based on Qualcomm/Atheros
QCA9563+QCA9880.

Specification:

- 750/400/250 MHz (CPU/DDR/AHB
- 128 MB of RAM (DDR2)
- 16 MB of FLASH (SPI NOR)
- 3T3R 2.4 GHz
- 3T3R 5 GHz
- 5x 10/100/1000 Mbps Ethernet
- 10x LED, 2x button
- UART header on PCB

Flash instruction:
1. Upload lede-ar71xx-generic-archer-c7-v5-squashfs-factory.bin via Web interface

Flash instruction using TFTP recovery:
1. Set PC to fixed ip address 192.168.0.66
2. Download lede-ar71xx-generic-archer-c7-v5-squashfs-factory.bin
and rename it to ArcherC7v5_tp_recovery.bin
3. Start a tftp server with the file tp_recovery.bin in its root directory
4. Turn off the router
5. Press and hold Reset button
6. Turn on router with the reset button pressed and wait ~15 seconds
7. Release the reset button and after a short time
the firmware should be transferred from the tftp server
8. Wait ~30 second to complete recovery.

Signed-off-by: Arvid E. Picciani <aep@exys.org>
(cherry picked from commit bf39d5594b3c8f9409e6d9408a1f370c9f18d0dd)
ipq806x: increase kernel partition size for the TP-Link Archer C2600 2018-05-24T15:24:31+00:00 Stefan Lippers-Hollmann s.l-h@gmx.de 2018-05-18T01:10:18+00:00 742ac017baaa7de2fde04bf6cdd39c0e9e5f92e0 The default image does not fit 2 MB anymore, expand os-image partition to 4 MB. Upgrading works transparently via sysupgrade in both directions. Another option would have been to merge "os-image" and "rootfs" into a single "firmware" partition using MTD_SPLIT_TPLINK_FW, but just changing the sizes of the existing partitioning has been deemed safer and actually tested on an affected device; the maximum for rootfs changes from 27 MB to 25 MB. Run-tested on TP-Link Archer C2600. Signed-off-by: Joris de Vries <joris@apptrician.nl> [slh: extend comments and commit message, rename rootfs] Signed-off-by: Stefan Lippers-Hollmann <s.l-h@gmx.de> (cherry picked from commit b72b36653a3fc8347456ab9c45d26a3144688a4c) 
The default image does not fit 2 MB anymore, expand os-image partition
to 4 MB.

Upgrading works transparently via sysupgrade in both directions.
Another option would have been to merge "os-image" and "rootfs" into a
single "firmware" partition using MTD_SPLIT_TPLINK_FW, but just
changing the sizes of the existing partitioning has been deemed safer
and actually tested on an affected device; the maximum for rootfs
changes from 27 MB to 25 MB.

Run-tested on TP-Link Archer C2600.

Signed-off-by: Joris de Vries <joris@apptrician.nl>
[slh: extend comments and commit message, rename rootfs]
Signed-off-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>

(cherry picked from commit b72b36653a3fc8347456ab9c45d26a3144688a4c)
firmware-utils: add DNS-313 image header tool 2018-05-05T04:57:00+00:00 Linus Walleij linus.walleij@linaro.org 2018-04-04T20:15:29+00:00 20d0dace40b74b098309cefb29a1ce5d57988e7e This tool is used to create headers on images for the D-Link DNS-313 in gemini target. Will be used after switching gemini to 4.14 kernel. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 
This tool is used to create headers on images for the
D-Link DNS-313 in gemini target.
Will be used after switching gemini to 4.14 kernel.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
firmware-utils: tplink-safeloader: increase RE350 kernel size 2018-04-23T20:07:22+00:00 Alex Maclean monkeh@monkeh.net 2018-04-23T17:36:54+00:00 a31107a97a00b2d637b8f7468f01317332dad801 4.14 increased kernel size, so grow the kernel partition by 128K to compensate. Fixes FS#1479. Signed-off-by: Alex Maclean <monkeh@monkeh.net> 
4.14 increased kernel size, so grow the kernel partition by 128K to compensate.

Fixes FS#1479.

Signed-off-by: Alex Maclean <monkeh@monkeh.net>
ar71xx: increase kernel partition size for CPE/WBS 210/510 2018-04-10T16:29:19+00:00 Matthias Schiffer mschiffer@universe-factory.net 2018-04-10T16:14:41+00:00 e39847ea2f70bf8880a4533b22a0eed110ffea98 Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> 
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
firmware-utils: tplink-safeloader: move CPE/WBS 210/510 version metainfo to the end 2018-04-10T16:29:19+00:00 Matthias Schiffer mschiffer@universe-factory.net 2018-04-10T15:26:34+00:00 373dc11b519516682ab48bf7db501ffffced4e61 Having the metainfo between kernel and rootfs prevents us from resizing the kernel partition as necessary. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> 
Having the metainfo between kernel and rootfs prevents us from resizing
the kernel partition as necessary.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
ar71xx: add support for TP-Link Archer C60 v2 2018-04-06T22:09:05+00:00 Henryk Heisig hyniu@o2.pl 2018-01-15T05:44:14+00:00 c0742307a18178ee7d2cee1fc6b0e199ccb1e1fa TP-Link Archer C60 v2 is a dual-band AC1350 router, based on Qualcomm/Atheros QCA9561 + QCA9886. Specification: - 775/650/258 MHz (CPU/DDR/AHB) - 64 MB of RAM (DDR2) - 8 MB of FLASH (SPI NOR) - 3T3R 2.4 GHz - 2T2R 5 GHz - 5x 10/100 Mbps Ethernet - 7x LED, 2x button - UART header on PCB Flash instruction (web): Download lede-ar71xx-generic-archer-c60-v2-squashfs-factory.bin and use OEM System Tools - Firmware Upgrade site. Flash instruction (recovery): 1. Set PC to fixed IP address 192.168.0.66 2. Download lede-ar71xx-generic-archer-c60-v2-squashfs-factory.bin and rename it to tp_recovery.bin 3. Start a tftp server with the file tp_recovery.bin in its root directory 4. Turn off the router 5. Press and hold reset button 6. Turn on router with the reset button pressed and wait ~15 seconds 7. Release the reset button and after a short time the firmware should be transferred from the tftp server 8. Wait ~30 second to complete recovery Flash instruction (under U-Boot, using UART): tftp 0x81000000 lede-ar71xx-...-sysupgrade.bin erase 0x9f030000 +$filesize cp.b $fileaddr 0x9f030000 $filesize reset Signed-off-by: Henryk Heisig <hyniu@o2.pl> 
TP-Link Archer C60 v2 is a dual-band AC1350 router, based on
Qualcomm/Atheros QCA9561 + QCA9886.

Specification:

- 775/650/258 MHz (CPU/DDR/AHB)
- 64 MB of RAM (DDR2)
- 8 MB of FLASH (SPI NOR)
- 3T3R 2.4 GHz
- 2T2R 5 GHz
- 5x 10/100 Mbps Ethernet
- 7x LED, 2x button
- UART header on PCB

Flash instruction (web):

Download lede-ar71xx-generic-archer-c60-v2-squashfs-factory.bin and use
OEM System Tools - Firmware Upgrade site.

Flash instruction (recovery):

1. Set PC to fixed IP address 192.168.0.66
2. Download lede-ar71xx-generic-archer-c60-v2-squashfs-factory.bin and
   rename it to tp_recovery.bin
3. Start a tftp server with the file tp_recovery.bin in its root
   directory
4. Turn off the router
5. Press and hold reset button
6. Turn on router with the reset button pressed and wait ~15 seconds
7. Release the reset button and after a short time the firmware should
   be transferred from the tftp server
8. Wait ~30 second to complete recovery

Flash instruction (under U-Boot, using UART):

tftp 0x81000000 lede-ar71xx-...-sysupgrade.bin
erase 0x9f030000 +$filesize
cp.b $fileaddr 0x9f030000 $filesize
reset

Signed-off-by: Henryk Heisig <hyniu@o2.pl>
firmware-utils: image generator for D-Link DAP-1330 2018-04-05T13:28:56+00:00 Nicolò Veronese nicveronese@gmail.com 2017-06-16T12:06:07+00:00 0d8a0a6a17ea203527a5c61241ea19d763aed567 Signed-off-by: Nicolò Veronese <nicveronese@gmail.com> 
Signed-off-by: Nicolò Veronese <nicveronese@gmail.com>
firmware-utils: add JBOOT bootloader image support 2018-03-18T21:22:38+00:00 Pawel Dembicki paweldembicki@gmail.com 2018-02-03T11:59:50+00:00 84c1b786b9830c17034e5de915ce11965666febd Tested on D-Link DWR-116. Based on mktplinkfw. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> 
Tested on D-Link DWR-116.
Based on mktplinkfw.

Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
firmware-utils: tplink-safeloader: compile as gnu99 2018-03-15T17:22:36+00:00 Alexander Couzens lynxis@fe80.eu 2018-03-15T17:17:01+00:00 3137622efb8af483ae098c3fb5ddef219c5cde46 Also fix minor coding style issue and one redeclaration. Signed-off-by: Alexander Couzens <lynxis@fe80.eu> 
Also fix minor coding style issue and one redeclaration.

Signed-off-by: Alexander Couzens <lynxis@fe80.eu>