diff options
author | 张鹏 <sd20@qxwlan.com> | 2018-07-17 18:14:25 +0800 |
---|---|---|
committer | John Crispin <john@phrozen.org> | 2018-07-30 14:02:41 +0200 |
commit | a3dd6c939df83753256566565cad707c9413fbcb (patch) | |
tree | 99ce07d32d63951ed3e0216fe53ff405f8ee75a8 | |
parent | 11a5128b983fdc78ffeac063bf9060116cad281b (diff) | |
download | mtk-20170518-a3dd6c939df83753256566565cad707c9413fbcb.zip mtk-20170518-a3dd6c939df83753256566565cad707c9413fbcb.tar.gz mtk-20170518-a3dd6c939df83753256566565cad707c9413fbcb.tar.bz2 |
ar71xx:add support for E750G v8
Qxwlan E750G v8 is based on Qualcomm QCA9344.
Specification:
- 560/450/225 MHz (CPU/DDR/AHB)
- 128 MB of RAM (DDR2)
- 8/16 MB of FLASH (SPI NOR)
- 2T2R 2.4G GHz (AR9344)
- 2x 10/100 Mbps Ethernet (PoE support)
- 2x 10/100/1000 Mbps Ethernet
- 7x LED (6 driven by GPIO)
- 1x button (reset)
- 1x DC jack for main power input (9-48 V)
- UART (J23) and LEDs (J2) headers on PCB
Flash instruction (using U-Boot CLI and tftp server):
- Configure PC with static IP 192.168.1.10 and tftp server.
- Rename "sysupgrade" filename to "firmware.bin" and place it in tftp
server directory.
- Connect PC with one of RJ45 ports, power up the board and press
"enter" key to access U-Boot CLI.
- Use the following command to update the device to OpenWrt: "run lfw".
Flash instruction (using U-Boot web-based recovery):
- Configure PC with static IP 192.168.1.xxx(2-254)/24.
- Connect PC with one of RJ45 ports, press the reset button, power up
the board and keep button pressed for around 6-7 seconds, until LEDs
start flashing.
- Open your browser and enter 192.168.1.1, select "sysupgrade" image
and click the upgrade button.
Signed-off-by: 张鹏 <sd20@qxwlan.com>
(cherry picked from commit 53a45020135b504cb4bee0fa8d98c8eaf6391066)
-rwxr-xr-x | target/linux/ar71xx/base-files/etc/board.d/01_leds | 5 | ||||
-rwxr-xr-x | target/linux/ar71xx/base-files/etc/board.d/02_network | 1 | ||||
-rw-r--r-- | target/linux/ar71xx/base-files/etc/diag.sh | 1 | ||||
-rwxr-xr-x | target/linux/ar71xx/base-files/lib/ar71xx.sh | 3 | ||||
-rwxr-xr-x | target/linux/ar71xx/base-files/lib/upgrade/platform.sh | 1 | ||||
-rw-r--r-- | target/linux/ar71xx/config-4.9 | 1 | ||||
-rw-r--r-- | target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt | 11 | ||||
-rw-r--r-- | target/linux/ar71xx/files/arch/mips/ath79/Makefile | 1 | ||||
-rw-r--r-- | target/linux/ar71xx/files/arch/mips/ath79/mach-e750g-v8.c | 151 | ||||
-rw-r--r-- | target/linux/ar71xx/files/arch/mips/ath79/machtypes.h | 1 | ||||
-rw-r--r-- | target/linux/ar71xx/generic/config-default | 1 | ||||
-rw-r--r-- | target/linux/ar71xx/image/generic.mk | 19 |
12 files changed, 194 insertions, 2 deletions
diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds b/target/linux/ar71xx/base-files/etc/board.d/01_leds index 3b986c3..858d675 100755 --- a/target/linux/ar71xx/base-files/etc/board.d/01_leds +++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds @@ -67,7 +67,7 @@ cpe870|\ dr531|\ e600g-v2|\ e600gac-v2|\ -e750a-v2) +e750a-v4) ucidef_set_led_netdev "lan" "LAN" "$board:green:lan" "eth0" ucidef_set_led_netdev "wan" "WAN" "$board:green:wan" "eth1" @@ -373,7 +373,8 @@ e1700ac-v2) ucidef_set_led_usbdev "usb" "USB" "$board:green:usb" "1-1" ucidef_set_led_wlan "wlan2g" "WLAN2G" "$board:green:wlan2g" "phy1tpt" ;; -e558-v2) +e558-v2|\ +e750g-v8) ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan" "phy0tpt" ;; esr900) diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network b/target/linux/ar71xx/base-files/etc/board.d/02_network index 9d8c1f2..b007636 100755 --- a/target/linux/ar71xx/base-files/etc/board.d/02_network +++ b/target/linux/ar71xx/base-files/etc/board.d/02_network @@ -380,6 +380,7 @@ ar71xx_setup_interfaces() ucidef_add_switch_attr "switch0" "enable" "false" ;; e1700ac-v2|\ + e750g-v8|\ unifiac-pro|\ xd3200) ucidef_add_switch "switch0" \ diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh index 98d5898..4eb2abb 100644 --- a/target/linux/ar71xx/base-files/etc/diag.sh +++ b/target/linux/ar71xx/base-files/etc/diag.sh @@ -27,6 +27,7 @@ get_status_led() { e558-v2|\ e600gac-v2|\ e750a-v4|\ + e750g-v8|\ eap120|\ minibox-v1|\ packet-squirrel|\ diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh index fb73288..3af2eee 100755 --- a/target/linux/ar71xx/base-files/lib/ar71xx.sh +++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh @@ -687,6 +687,9 @@ ar71xx_board_detect() { *"E750A v4") name="e750a-v4" ;; + *"E750G v8") + name="e750g-v8" + ;; *"EAP120") name="eap120" tplink_pharos_board_detect "$(tplink_pharos_get_model_string | tr -d '\r')" diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh index f171aa6..ca1270b 100755 --- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh +++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh @@ -254,6 +254,7 @@ platform_check_image() { e600g-v2|\ e600gac-v2|\ e750a-v4|\ + e750g-v8|\ ebr-2310-c1|\ ens202ext|\ epg5000|\ diff --git a/target/linux/ar71xx/config-4.9 b/target/linux/ar71xx/config-4.9 index 70111e2..8aa0b41 100644 --- a/target/linux/ar71xx/config-4.9 +++ b/target/linux/ar71xx/config-4.9 @@ -104,6 +104,7 @@ CONFIG_ATH79=y # CONFIG_ATH79_MACH_E558_V2 is not set # CONFIG_ATH79_MACH_E600G_V2 is not set # CONFIG_ATH79_MACH_E750A_V4 is not set +# CONFIG_ATH79_MACH_E750G_V8 is not set # CONFIG_ATH79_MACH_EAP120 is not set # CONFIG_ATH79_MACH_EAP300V2 is not set # CONFIG_ATH79_MACH_EAP7660D is not set diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt index 14cd19f..e7655b3 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt +++ b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt @@ -744,6 +744,17 @@ config ATH79_MACH_E750A_V4 select ATH79_DEV_USB select ATH79_DEV_WMAC +config ATH79_MACH_E750G_V8 + bool "Qxwlan E750G v8 support" + select SOC_AR934X + select ATH79_DEV_AP9X_PCI if PCI + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_USB + select ATH79_DEV_WMAC + config ATH79_MACH_ESR900 bool "EnGenius ESR900 board support" select SOC_QCA955X diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Makefile b/target/linux/ar71xx/files/arch/mips/ath79/Makefile index 84b61df..8800a7d 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/Makefile +++ b/target/linux/ar71xx/files/arch/mips/ath79/Makefile @@ -115,6 +115,7 @@ obj-$(CONFIG_ATH79_MACH_E1700AC_V2) += mach-e1700ac-v2.o obj-$(CONFIG_ATH79_MACH_E558_V2) += mach-e558-v2.o obj-$(CONFIG_ATH79_MACH_E600G_V2) += mach-e600g-v2.o obj-$(CONFIG_ATH79_MACH_E750A_V4) += mach-e750a-v4.o +obj-$(CONFIG_ATH79_MACH_E750G_V8) += mach-e750g-v8.o obj-$(CONFIG_ATH79_MACH_EAP120) += mach-eap120.o obj-$(CONFIG_ATH79_MACH_EAP300V2) += mach-eap300v2.o obj-$(CONFIG_ATH79_MACH_EAP7660D) += mach-eap7660d.o diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-e750g-v8.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-e750g-v8.c new file mode 100644 index 0000000..72d1349 --- /dev/null +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-e750g-v8.c @@ -0,0 +1,151 @@ +/* + * Qxwlan E750G v8 board support + * + * Copyright (C) 2017 Peng Zhang <sd20@qxwlan.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/phy.h> +#include <linux/platform_device.h> +#include <linux/ath9k_platform.h> +#include <linux/ar8216_platform.h> + +#include <asm/mach-ath79/ar71xx_regs.h> + +#include "common.h" +#include "pci.h" +#include "dev-ap9x-pci.h" +#include "dev-gpio-buttons.h" +#include "dev-eth.h" +#include "dev-usb.h" +#include "dev-leds-gpio.h" +#include "dev-m25p80.h" +#include "dev-spi.h" +#include "dev-wmac.h" +#include "machtypes.h" + +#define E750G_V8_GPIO_LED_SYS 14 +#define E750G_V8_GPIO_LED_DS20 15 +#define E750G_V8_GPIO_LED_DS10 20 +#define E750G_V8_GPIO_LED_WLAN 21 + +#define E750G_V8_GPIO_BTN_RESET 12 + +#define E750G_V8_KEYS_POLL_INTERVAL 20 /* msecs */ +#define E750G_V8_KEYS_DEBOUNCE_INTERVAL (3 * E750G_V8_KEYS_POLL_INTERVAL) + +static struct gpio_led e750g_v8_leds_gpio[] __initdata = { + { + .name = "e750g-v8:green:system", + .gpio = E750G_V8_GPIO_LED_SYS, + .active_low = 1, + }, + { + .name = "e750g-v8:green:ds10", + .gpio = E750G_V8_GPIO_LED_DS10, + .active_low = 1, + }, + { + .name = "e750g-v8:green:ds20", + .gpio = E750G_V8_GPIO_LED_DS20, + .active_low = 1, + }, + { + .name = "e750g-v8:green:wlan", + .gpio = E750G_V8_GPIO_LED_WLAN, + .active_low = 1, + }, +}; + +static struct gpio_keys_button e750g_v8_gpio_keys[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = E750G_V8_KEYS_DEBOUNCE_INTERVAL, + .gpio = E750G_V8_GPIO_BTN_RESET, + .active_low = 1, + }, +}; + +static const struct ar8327_led_info e750g_v8_leds_qca8334[] = { + AR8327_LED_INFO(PHY1_0, HW, "e750g-v8:green:lan"), + AR8327_LED_INFO(PHY2_0, HW, "e750g-v8:green:wan"), +}; + +static struct ar8327_pad_cfg e750g_v8_ar8327_pad0_cfg = { + .mode = AR8327_PAD_MAC_RGMII, + .txclk_delay_en = true, + .rxclk_delay_en = true, + .txclk_delay_sel = AR8327_CLK_DELAY_SEL1, + .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2, + .mac06_exchange_dis = true, +}; + +static struct ar8327_led_cfg e750g_v8_ar8327_led_cfg = { + .led_ctrl0 = 0x00000000, + .led_ctrl1 = 0xc737c737, + .led_ctrl2 = 0x00000000, + .led_ctrl3 = 0x00c30c00, + .open_drain = true, +}; + +static struct ar8327_platform_data e750g_v8_ar8327_data = { + .pad0_cfg = &e750g_v8_ar8327_pad0_cfg, + .port0_cfg = { + .force_link = 1, + .speed = AR8327_PORT_SPEED_1000, + .duplex = 1, + .txpause = 1, + .rxpause = 1, + }, + .led_cfg = &e750g_v8_ar8327_led_cfg, + .leds = e750g_v8_leds_qca8334, + .num_leds = ARRAY_SIZE(e750g_v8_leds_qca8334), +}; + +static struct mdio_board_info e750g_v8_mdio0_info[] = { + { + .bus_id = "ag71xx-mdio.0", + .phy_addr = 0, + .platform_data = &e750g_v8_ar8327_data, + }, +}; + +static void __init e750g_v8_setup(void) +{ + u8 *mac = (u8 *) KSEG1ADDR(0x1f050400); + u8 *art = (u8 *) KSEG1ADDR(0x1f061000); + + ath79_register_m25p80(NULL); + ath79_register_leds_gpio(-1, ARRAY_SIZE(e750g_v8_leds_gpio), + e750g_v8_leds_gpio); + ath79_register_gpio_keys_polled(-1, E750G_V8_KEYS_POLL_INTERVAL, + ARRAY_SIZE(e750g_v8_gpio_keys), + e750g_v8_gpio_keys); + + mdiobus_register_board_info(e750g_v8_mdio0_info, + ARRAY_SIZE(e750g_v8_mdio0_info)); + + ath79_register_mdio(0, 0x0); + ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0 | + AR934X_ETH_CFG_SW_ONLY_MODE); + + /* GMAC0 is connected to an AR8327 switch */ + ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; + ath79_eth0_data.phy_mask = BIT(0); + ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; + ath79_eth0_pll_data.pll_1000 = 0x06000000; + ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0); + ath79_register_eth(0); + + ath79_register_pci(); + ath79_register_usb(); + ath79_register_wmac(art, NULL); +} + +MIPS_MACHINE(ATH79_MACH_E750G_V8, "E750G-V8", "Qxwlan E750G v8", + e750g_v8_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h index c33c020..390ec0b 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h +++ b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h @@ -109,6 +109,7 @@ enum ath79_mach_type { ATH79_MACH_E600G_V2, /* Qxwlan E600G v2 */ ATH79_MACH_E600GAC_V2, /* Qxwlan E600GAC v2 */ ATH79_MACH_E750A_V4, /* Qxwlan E750A v4 */ + ATH79_MACH_E750G_V8, /* Qxwlan E750G v8 */ ATH79_MACH_EAP120, /* TP-LINK EAP120 */ ATH79_MACH_EAP300V2, /* EnGenius EAP300 v2 */ ATH79_MACH_EAP7660D, /* Senao EAP7660D */ diff --git a/target/linux/ar71xx/generic/config-default b/target/linux/ar71xx/generic/config-default index 2f9e1b7..da331d3 100644 --- a/target/linux/ar71xx/generic/config-default +++ b/target/linux/ar71xx/generic/config-default @@ -77,6 +77,7 @@ CONFIG_ATH79_MACH_E2100L=y CONFIG_ATH79_MACH_E558_V2=y CONFIG_ATH79_MACH_E600G_V2=y CONFIG_ATH79_MACH_E750A_V4=y +CONFIG_ATH79_MACH_E750G_V8=y CONFIG_ATH79_MACH_EAP120=y CONFIG_ATH79_MACH_EAP300V2=y CONFIG_ATH79_MACH_EAP7660D=y diff --git a/target/linux/ar71xx/image/generic.mk b/target/linux/ar71xx/image/generic.mk index ba7374e..6405575 100644 --- a/target/linux/ar71xx/image/generic.mk +++ b/target/linux/ar71xx/image/generic.mk @@ -411,6 +411,25 @@ define Device/e750a-v4-8M endef TARGET_DEVICES += e750a-v4-8M +define Device/e750g-v8-16M + DEVICE_TITLE := Qxwlan E750G v8 (16MB flash) + DEVICE_PACKAGES := kmod-usb-core kmod-usb2 -swconfig + BOARDNAME := E750G-V8 + SUPPORTED_DEVICES := e750g-v8 + IMAGE_SIZE := 15936k + MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env),64k(pri-data)ro,64k(art),-(firmware) + IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) |\ + append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE) +endef +TARGET_DEVICES += e750g-v8-16M + +define Device/e750g-v8-8M + $(Device/e750g-v8-16M) + DEVICE_TITLE := Qxwlan E750G v8 (8MB flash) + IMAGE_SIZE := 7744k +endef +TARGET_DEVICES += e750g-v8-8M + define Device/ew-balin DEVICE_TITLE := Embedded Wireless Balin Platform DEVICE_PACKAGES := kmod-usb-core kmod-usb-chipidea |