kernel: split patches folder up into backport, pending and hack folders

* properly format/comment all patches
* merge debloat patches
* merge Kconfig patches
* merge swconfig patches
* merge hotplug patches
* drop 200-fix_localversion.patch - upstream
* drop 222-arm_zimage_none.patch - unused
* drop 252-mv_cesa_depends.patch - no longer required
* drop 410-mtd-move-forward-declaration-of-struct-mtd_info.patch - unused
* drop 661-fq_codel_keep_dropped_stats.patch - outdated
* drop 702-phy_add_aneg_done_function.patch - upstream
* drop 840-rtc7301.patch - unused
* drop 841-rtc_pt7c4338.patch - upstream
* drop 921-use_preinit_as_init.patch - unused
* drop spio-gpio-old and gpio-mmc - unused

Signed-off-by: John Crispin <john@phrozen.org>

1 files changed, 0 insertions, 68 deletions

diff --git a/target/linux/generic/patches-4.9/076-v4.11-0004-net-phy-bcm7xxx-Implement-EGPHY-workaround-for-7278.patch b/target/linux/generic/patches-4.9/076-v4.11-0004-net-phy-bcm7xxx-Implement-EGPHY-workaround-for-7278.patch
deleted file mode 100644
index 7aa4ee2..0000000
--- a/target/linux/generic/patches-4.9/076-v4.11-0004-net-phy-bcm7xxx-Implement-EGPHY-workaround-for-7278.patch
+++ /dev/null
@@ -1,68 +0,0 @@
-From: Florian Fainelli <f.fainelli@gmail.com>
-Date: Fri, 20 Jan 2017 12:36:34 -0800
-Subject: [PATCH] net: phy: bcm7xxx: Implement EGPHY workaround for 7278
-
-Implement the HW design team recommended workaround in for 7278. Since
-the GPHY now returns its revision information in MII_PHYS_ID[23] we need
-to check whether the revision provided in flags is 0 or not.
-
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
-
---- a/drivers/net/phy/bcm7xxx.c
-+++ b/drivers/net/phy/bcm7xxx.c
-@@ -163,12 +163,43 @@ static int bcm7xxx_28nm_e0_plus_afe_conf
- 	return 0;
- }
- 
-+static int bcm7xxx_28nm_a0_patch_afe_config_init(struct phy_device *phydev)
-+{
-+	/* +1 RC_CAL codes for RL centering for both LT and HT conditions */
-+	bcm_phy_write_misc(phydev, AFE_RXCONFIG_2, 0xd003);
-+
-+	/* Cut master bias current by 2% to compensate for RC_CAL offset */
-+	bcm_phy_write_misc(phydev, DSP_TAP10, 0x791b);
-+
-+	/* Improve hybrid leakage */
-+	bcm_phy_write_misc(phydev, AFE_HPF_TRIM_OTHERS, 0x10e3);
-+
-+	/* Change rx_on_tune 8 to 0xf */
-+	bcm_phy_write_misc(phydev, 0x21, 0x2, 0x87f6);
-+
-+	/* Change 100Tx EEE bandwidth */
-+	bcm_phy_write_misc(phydev, 0x22, 0x2, 0x017d);
-+
-+	/* Enable ffe zero detection for Vitesse interoperability */
-+	bcm_phy_write_misc(phydev, 0x26, 0x2, 0x0015);
-+
-+	r_rc_cal_reset(phydev);
-+
-+	return 0;
-+}
-+
- static int bcm7xxx_28nm_config_init(struct phy_device *phydev)
- {
- 	u8 rev = PHY_BRCM_7XXX_REV(phydev->dev_flags);
- 	u8 patch = PHY_BRCM_7XXX_PATCH(phydev->dev_flags);
- 	int ret = 0;
- 
-+	/* Newer devices have moved the revision information back into a
-+	 * standard location in MII_PHYS_ID[23]
-+	 */
-+	if (rev == 0)
-+		rev = phydev->phy_id & ~phydev->drv->phy_id_mask;
-+
- 	pr_info_once("%s: %s PHY revision: 0x%02x, patch: %d\n",
- 		     phydev_name(phydev), phydev->drv->name, rev, patch);
- 
-@@ -192,6 +223,9 @@ static int bcm7xxx_28nm_config_init(stru
- 	case 0x10:
- 		ret = bcm7xxx_28nm_e0_plus_afe_config_init(phydev);
- 		break;
-+	case 0x01:
-+		ret = bcm7xxx_28nm_a0_patch_afe_config_init(phydev);
-+		break;
- 	default:
- 		break;
- 	}