summaryrefslogtreecommitdiff
path: root/target/linux/ar71xx/base-files/etc/uci-defaults
Commit message (Collapse)AuthorAgeFilesLines
...
* ar71xx: fix network configuration for the TL-WA901N/ND boardsGabor Juhos2012-01-041-5/+1
| | | | SVN-Revision: 29654
* ar71xx: allow to use LAN LED on the TL-WA901N/ND boardsGabor Juhos2012-01-041-0/+4
| | | | SVN-Revision: 29653
* ar71xx: add default LED configuration for the TL-MR3020Gabor Juhos2012-01-041-0/+5
| | | | | | Also use the system LED for diagnostic. SVN-Revision: 29652
* ar71xx: add support for TP-Link TL-MR3020Gabor Juhos2012-01-041-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for the TP-Link device TL-MR3020 which is very similiar to the TL-WR703N. The TL-MR3020 uses 5 LEDs, 1 push button and a switch with 3 positions. Only four LEDs can be controlled via GPIO. The power LED is connected to the power supply. The WPS push button has been mapped to KEY_WPS_BUTTON. The two GPIO signals of the sliding switch have been mapped to BTN_0 and BTN_1. I have also setup a wiki page with details here: http://wiki.openwrt.org/toh/tp-link/tl-mr3020 USB is working and has been tested with USB mass storage and USB UMTS stick. Wifi also seems to work. Ethernet is working too. Signed-off-by: Christian Cier-Zniewski <c.cier@gmx.de> SVN-Revision: 29651
* ar71xx: add support for the ALFA Network N2/N5 boardsGabor Juhos2012-01-012-0/+6
| | | | SVN-Revision: 29635
* ar71xx: define LAN/WAN LEDs for the TL-WR741N/ND boardsGabor Juhos2011-12-311-1/+35
| | | | SVN-Revision: 29631
* ar71xx: add default network config for buffalo WZR-HP-G300NH2 and WZR-HP-G450HJonas Gorski2011-12-211-0/+8
| | | | | | Thanks netprince for reporting and testing. SVN-Revision: 29595
* ar71xx: connect GMAC0 to the internal switch on DB120Gabor Juhos2011-12-151-0/+6
| | | | | | | | Because the external switch has no driver yet, connect GMAC0 to the PHY4 of the internal switch for now. This allows to use the DB120 board as a router with 4LAN+1WAN ports. SVN-Revision: 29557
* ar71xx: add support for ALFA Network's Hornet-UB boardGabor Juhos2011-12-141-0/+7
| | | | SVN-Revision: 29535
* ar71xx: rewrite WNDR3700/3800 handlingGabor Juhos2011-12-051-3/+1
| | | | SVN-Revision: 29434
* add some missing wndr3800 base-files definitionsJo-Philipp Wich2011-12-051-1/+2
| | | | SVN-Revision: 29433
* ar71xx: add support for Ubiquiti AirRouterGabor Juhos2011-12-011-0/+1
| | | | | | Signed-off-by: Gergely Barta <gergely.barta@printerfairkft.hu> SVN-Revision: 29395
* ar71xx: configure default led behavior for the OM2PGabor Juhos2011-12-011-0/+5
| | | | | | Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> SVN-Revision: 29394
* ar71xx: use /lib/functions/uci-defaults.shGabor Juhos2011-12-011-124/+49
| | | | SVN-Revision: 29385
* ar71xx: generate ubootenv from uci-defaults instead of providing defconfigGabor Juhos2011-11-121-0/+37
| | | | | | | | | | I noticed most of /etc/defconfig was replaced by /etc/uci-defaults, which is indeed much nicer. So I moved over ubootenv from having a defconfig-entry to also be generated from uci-defaults. Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 28971
* ar71xx: create TL-WA901ND network config from uci-defaultsGabor Juhos2011-11-071-0/+5
| | | | SVN-Revision: 28833
* ar71xx: create ALL0258N network config from uci-defaultsGabor Juhos2011-11-071-0/+4
| | | | SVN-Revision: 28832
* ar71xx: create NBG{460N,550N,550NH} network config from uci-defaultsGabor Juhos2011-11-071-0/+6
| | | | SVN-Revision: 28831
* ar71xx: create WZR-HP-G300NH network config from uci-defaultsGabor Juhos2011-11-071-0/+6
| | | | SVN-Revision: 28830
* ar71xx: create RB-493G network config from uci-defaultsGabor Juhos2011-11-071-0/+9
| | | | SVN-Revision: 28829
* ar71xx: create TL-WR1043ND network config from uci-defaultsGabor Juhos2011-11-071-0/+7
| | | | SVN-Revision: 28828
* ar71xx: create WRT160NL network config from uci-defaultsGabor Juhos2011-11-071-0/+6
| | | | SVN-Revision: 28827
* ar71xx: create PB92 network config from uci-defaultsGabor Juhos2011-11-071-0/+7
| | | | SVN-Revision: 28826
* ar71xx: create DIR-825-B1 network config from uci-defaultsGabor Juhos2011-11-071-0/+6
| | | | SVN-Revision: 28825
* ar71xx: create TL-WR{841N-v1,941ND} network config from uci-defaultsGabor Juhos2011-11-071-0/+17
| | | | SVN-Revision: 28824
* ar71xx: create RB-450 network config from uci-defaultsGabor Juhos2011-11-071-0/+6
| | | | SVN-Revision: 28823
* ar71xx: create RB-450G, RouterStation Pro network config from uci-defaultsGabor Juhos2011-11-071-0/+7
| | | | SVN-Revision: 28822
* ar71xx: create RB-433{,U} network config from uci defaultsGabor Juhos2011-11-071-0/+7
| | | | SVN-Revision: 28821
* ar71xx: create even more network configs from the uci-defaults scriptGabor Juhos2011-11-071-0/+45
| | | | | | | | Create the default network configuration dynamically for the AR724x/AR9331 boards. Some other boards are using the same configuration, so convert those as well. SVN-Revision: 28820
* ar71xx: create more network configs from the uci-defaults scriptGabor Juhos2011-11-071-0/+8
| | | | | | | Create the default network configuration dynamically for the boards with swapped eth0, eth1 interfaces. SVN-Revision: 28819
* ar71xx: create a bunch of network configs from the uci-defaults scriptGabor Juhos2011-11-071-0/+10
| | | | | | | Create the default network configuration dynamically for the boards with a single ethernet interface. SVN-Revision: 28818
* ar71xx: create generic network config from an uci-defaults scriptGabor Juhos2011-11-071-0/+65
| | | | SVN-Revision: 28817
* ar71xx: add initial support for the TL-WR741ND v4 boardGabor Juhos2011-11-011-0/+1
| | | | | | The ethernet port LEDs are not working yet. SVN-Revision: 28706
* ar71xx: combine LEDs setup in one fileGabor Juhos2011-11-0113-305/+144
| | | | SVN-Revision: 28704
* ar71xx: unify LED names on Planex boardsGabor Juhos2011-11-011-1/+1
| | | | SVN-Revision: 28703
* ar71xx: unify LED names on Buffalo boardsGabor Juhos2011-11-011-3/+3
| | | | SVN-Revision: 28702
* ar71xx: unify LED names on TP-Link boardsGabor Juhos2011-11-013-4/+4
| | | | SVN-Revision: 28701
* ar71xx: remove LED setup of nonexistent interfaces on RB750Gabor Juhos2011-10-311-24/+0
| | | | SVN-Revision: 28693
* base-files: make sure inittab-console-fixup returns with success (#10275)Jo-Philipp Wich2011-10-241-0/+2
| | | | SVN-Revision: 28562
* ar71xx: enable login only on the system console by defaultGabor Juhos2011-09-231-0/+25
| | | | SVN-Revision: 28294
* ar71xx: merge WZR-HP-G301NH support into WZR-HP-G300NHJonas Gorski2011-07-281-2/+2
| | | | | | | | Now that we can use a generic name for the switch there is no need for a separate image for the WZR-HP-G301NH. Update the default network config and remove the extra image. SVN-Revision: 27814
* ar71xx: fix uci-defaults script for the WZR-HP-G30XNH boardsGabor Juhos2011-05-311-2/+2
| | | | SVN-Revision: 27042
* ar71xx: add uci config for the WLAN LED on the WRT160NLGabor Juhos2011-05-081-0/+11
| | | | | | Based on a patch by Magyar Szabolcs <mszabi@freemail.hu> SVN-Revision: 26861
* ar71xx: use phy0tpt trigger for the WLAN LEDsGabor Juhos2011-05-082-2/+2
| | | | SVN-Revision: 26860
* ar71xx: Add support for WZR-HP-G301NHGabor Juhos2011-04-121-1/+1
| | | | | | | | | | | | | | Add support for the Buffalo WZR-HP-G301NH. The only difference between it and the WZR-HP-G00NH is that it has a RTL8366RB instead of a RTL8366S. Since we don't do runtime detection of the switch, we need a separate machine definition for it. While we are at it, also rename the profile to reflect that it now is for more than one device. Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> SVN-Revision: 26601
* ar71xx: add support for the WNDR3700v2 boardGabor Juhos2011-01-261-1/+1
| | | | | | Based on a patch by Mark Mentovai <mark@moxienet.com> SVN-Revision: 25118
* ar71xx: make uci-default scripts executableGabor Juhos2011-01-045-0/+0
| | | | | | Reported-by: Nuno Gonçalves <nunojpg@gmail.com> SVN-Revision: 24897
* ar71xx: use usbdev trigger for USB LEDs by defaultGabor Juhos2010-12-176-2/+96
| | | | SVN-Revision: 24648
* ar71xx: populate LED configuration for WZR-HP-G300NHGabor Juhos2010-12-171-0/+30
| | | | | | | | Signed-off-by: Dave Lichterman <laviddichterman@gmail.com> [nand-disk trigger has been removed - juhosg] SVN-Revision: 24642
* ar71xx: add wlan led for the TL-WR941NDGabor Juhos2010-12-151-0/+22
| | | | SVN-Revision: 24612
generated by cgit v1.1 at 2025-08-11 15:36:00 +0000