summaryrefslogtreecommitdiff
path: root/target/linux/ar71xx
Commit message (Collapse)AuthorAgeFilesLines
...
* ar71xx: ar71xx_wdt: add shutdown handlerGabor Juhos2012-01-111-0/+6
| | | | SVN-Revision: 29705
* ar71xx: refresh patchesGabor Juhos2012-01-072-4/+4
| | | | SVN-Revision: 29683
* ar71xx: add a profile and build images for the TL-WR2543N/NDGabor Juhos2012-01-072-0/+17
| | | | SVN-Revision: 29682
* ar71xx: add initial support for the TL-WR2543N/ND boardGabor Juhos2012-01-0710-1/+164
| | | | | | The WLAN LEDs are not working yet. SVN-Revision: 29680
* ar71xx: allow to specify max read size for m25p80Gabor Juhos2012-01-071-0/+112
| | | | | | | | | | | | | | | Reading from the flash chip on the TL-WR2543ND seems buggy. If the SPI flash driver tries to read too much data in one SPI transfer, the flash chip returns bogus values. This can be caused by a buggy flash chip on my board, or it can be a bug in our SPI driver. Add a workaround to the m25p80 driver until I find out the root cause of the problem. The patch allows to specify the maximum numner of bytes which can be read safely withint one SPI transfer. SVN-Revision: 29679
* ar71xx: local mac support on the wndr3700Gabor Juhos2012-01-071-2/+13
| | | | | | | | | | | | | | The wndr3700 at least has no eth0 mac address and usually leverages the first wireless device's mac when in a bridged scenario. If, however, you want to route, and not bridge the interfaces, you need a unique mac address for it. This patch sets the local bit on the mac address pulled from the wireless chip and uses the resulting address for eth0. Patch-by: Dave Taht <dave.taht@gmail.com> SVN-Revision: 29675
* generic: improve MIPS kexec supportGabor Juhos2012-01-071-1/+1
| | | | | | | | | | | | | It is based on patches from the linux-longsoon-community git tree: http://dev.lemote.com/cgit/linux-loongson-community.git/ Now the kernel can use the command line parameter from kexec-tools. Runtime tested on ar71xx with 2.6.39.4 (the wathdog must be stopped before executing the new kernel). Compile tested with lantiq (3.1.4) and brcm47xx (3.0.12). SVN-Revision: 29674
* ar71xx: fix sysupgrade on the TL-WR841N/ND v7 boardsGabor Juhos2012-01-061-0/+1
| | | | SVN-Revision: 29672
* ar71xx: add support for Redwave RW2458NGabor Juhos2012-01-0610-0/+143
| | | | | | Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> SVN-Revision: 29669
* ar71xx: fix RB-750 network configurationGabor Juhos2012-01-061-1/+1
| | | | SVN-Revision: 29668
* ar71xx: fix sections mismatch warnings in the nand driversGabor Juhos2012-01-052-2/+2
| | | | SVN-Revision: 29667
* ar71xx: fix LED configuration on the RB-750Gabor Juhos2012-01-051-1/+5
| | | | SVN-Revision: 29666
* ar71xx: create profile and build image for the ALFA AP96 boardGabor Juhos2012-01-042-0/+18
| | | | SVN-Revision: 29663
* ar71xx: add inital support for the ALFA Network AP96 boardGabor Juhos2012-01-048-1/+172
| | | | | | | | The microSD slot and the Real Time Clock is not working yet. The miniPCIe interface is not tested due to the lack of a suitable card. SVN-Revision: 29662
* ar71xx: specify console kernel parameter for the Compex boardsGabor Juhos2012-01-041-7/+9
| | | | SVN-Revision: 29660
* ar71xx: allow to use the command line hack on compex devicesGabor Juhos2012-01-041-29/+31
| | | | SVN-Revision: 29659
* ar71xx: use the TL-MR3x20 code for the TL-WR841N/ND v7Gabor Juhos2012-01-046-13/+40
| | | | | | | These models are based on the AP99 reference board, and uses the AR7241 SoC. SVN-Revision: 29658
* ar71xx: show correct model name on TL-WA701N/ND boardsGabor Juhos2012-01-041-0/+3
| | | | SVN-Revision: 29657
* ar71xx: add profile and build image for the TL-WA701N/ND boardsGabor Juhos2012-01-042-0/+17
| | | | SVN-Revision: 29656
* ar71xx: fix network configuration for the TL-WA901N/ND boardsGabor Juhos2012-01-041-5/+1
| | | | SVN-Revision: 29654
* ar71xx: allow to use LAN LED on the TL-WA901N/ND boardsGabor Juhos2012-01-042-0/+15
| | | | SVN-Revision: 29653
* ar71xx: add default LED configuration for the TL-MR3020Gabor Juhos2012-01-042-0/+6
| | | | | | Also use the system LED for diagnostic. SVN-Revision: 29652
* ar71xx: add support for TP-Link TL-MR3020Gabor Juhos2012-01-0410-0/+160
| | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for the TP-Link device TL-MR3020 which is very similiar to the TL-WR703N. The TL-MR3020 uses 5 LEDs, 1 push button and a switch with 3 positions. Only four LEDs can be controlled via GPIO. The power LED is connected to the power supply. The WPS push button has been mapped to KEY_WPS_BUTTON. The two GPIO signals of the sliding switch have been mapped to BTN_0 and BTN_1. I have also setup a wiki page with details here: http://wiki.openwrt.org/toh/tp-link/tl-mr3020 USB is working and has been tested with USB mass storage and USB UMTS stick. Wifi also seems to work. Ethernet is working too. Signed-off-by: Christian Cier-Zniewski <c.cier@gmx.de> SVN-Revision: 29651
* ar71xx: use the new om-watchdog package for OM2PGabor Juhos2012-01-041-1/+1
| | | | | | Signed-off-by: Antonio Quartulli <ordex@autistici.org> SVN-Revision: 29648
* ar71xx: add profile and build factory image for the Hornet-UB boardGabor Juhos2012-01-012-13/+24
| | | | SVN-Revision: 29637
* ar71xx: build images for the ALFA Network N2/N5 boardsGabor Juhos2012-01-012-0/+41
| | | | SVN-Revision: 29636
* ar71xx: add support for the ALFA Network N2/N5 boardsGabor Juhos2012-01-0110-0/+183
| | | | SVN-Revision: 29635
* ar71xx: define LAN/WAN LEDs for the TL-WR741N/ND boardsGabor Juhos2011-12-313-6/+103
| | | | SVN-Revision: 29631
* ar71xx: enable SWCONFIG_LEDSGabor Juhos2011-12-311-0/+1
| | | | SVN-Revision: 29630
* ar71xx: ag71xx: implement get_port_{link,stats} callbacksGabor Juhos2011-12-311-0/+142
| | | | SVN-Revision: 29626
* ar71xx: fix LEDs on the WRT400NGabor Juhos2011-12-312-12/+13
| | | | SVN-Revision: 29624
* ar71xx: enable sysupgrade support for airrouterGabor Juhos2011-12-271-0/+1
| | | | | | | | Works for me! ;-) Patch-by: Russell Senior <russell@personaltelco.net> SVN-Revision: 29614
* ar71xx: fix sysupgrade on PB42/PB44 boardsGabor Juhos2011-12-271-2/+4
| | | | SVN-Revision: 29613
* ar71xx: set a reserved bit that resets to 1 when writing the address table ↵Felix Fietkau2011-12-221-0/+2
| | | | | | control register on the ar7240 switch (should fix #10547) SVN-Revision: 29598
* ar71xx: add default network config for buffalo WZR-HP-G300NH2 and WZR-HP-G450HJonas Gorski2011-12-211-0/+8
| | | | | | Thanks netprince for reporting and testing. SVN-Revision: 29595
* the mach file of the WZR-HP-G300NH2 accidentally claimed the mach id of the ↵Jo-Philipp Wich2011-12-211-1/+1
| | | | | | WZR-HP-AG300H, correct the id (#10649) SVN-Revision: 29593
* ar71xx: add missing wireless led changes for wzr-hp-g300nh2Felix Fietkau2011-12-191-6/+1
| | | | SVN-Revision: 29568
* ar71xx: add support for the wzr-hp-g300nh2Felix Fietkau2011-12-1810-0/+231
| | | | | | Signed-off-by: Mark Deneen <mdeneen@gmail.com> SVN-Revision: 29567
* ar71xx: use 64kraw template on more TP-Link boardsGabor Juhos2011-12-171-4/+4
| | | | SVN-Revision: 29561
* ar71xx: connect GMAC0 to the internal switch on DB120Gabor Juhos2011-12-152-1/+35
| | | | | | | | Because the external switch has no driver yet, connect GMAC0 to the PHY4 of the internal switch for now. This allows to use the DB120 board as a router with 4LAN+1WAN ports. SVN-Revision: 29557
* ar71xx: add defines for the AR934X GMAC interfaceGabor Juhos2011-12-151-0/+21
| | | | SVN-Revision: 29556
* ar71xx: fix GMAC1 interface speed on the DB120 boardGabor Juhos2011-12-151-1/+1
| | | | SVN-Revision: 29555
* ar71xx: ag71xx: fix switch port setup for AR934XGabor Juhos2011-12-151-11/+41
| | | | SVN-Revision: 29554
* ar71xx: ag71xx: allow to connect PHY4 to the CPU on AR934XGabor Juhos2011-12-152-4/+8
| | | | SVN-Revision: 29553
* ar71xx: ag71xx: setup switch interface mode on AR934XGabor Juhos2011-12-151-0/+19
| | | | SVN-Revision: 29552
* ar71xx: ag71xx: detect the built-in switch of the AR934X SoCsGabor Juhos2011-12-151-12/+36
| | | | SVN-Revision: 29551
* ar71xx: allow to attach the internal switch for AR934xGabor Juhos2011-12-151-0/+2
| | | | SVN-Revision: 29550
* ar71xx: introduce ar71xx_switch_dataGabor Juhos2011-12-155-8/+20
| | | | SVN-Revision: 29549
* ar71xx: build images for TL-WR741N/ND v2Gabor Juhos2011-12-151-0/+1
| | | | SVN-Revision: 29548
* ar71x: use raw squashfs images for TP-Link boardsGabor Juhos2011-12-151-20/+20
| | | | SVN-Revision: 29547
generated by cgit v1.1 at 2025-08-28 22:33:21 +0000