From 97c5cbc496e9cf8139994cd3ea987f4e9c70adbe Mon Sep 17 00:00:00 2001
From: Weijie Gao <hackpascal@gmail.com>
Date: Wed, 13 Jun 2018 21:14:49 +0800
Subject: ath79: add support for Phicomm K2T

This patch adds dts for qca956x and also support for Phicomm K2T

The qca965x.dtsi adds nearly all the necessary components.
Both ath9k AHB and PCIe worked well.

The Phicomm K2T uses MTD partition 'config' to store the mac addresses in
JSON format. To extract these fields correctly, a script is introduced:
    /lib/functions/k2t.sh
This script provides a helper function to extract mac addresses, and is used
in three places.

Hardware spec of Phicomm K2T:
CPU: QCA9563
DRAM: 64MB DDR2
Flash: 16MB SPI-NOR
Switch: QCA8337
WiFi 5.8GHz: QCA9886

Flash instruction:
Apply sysupgrade.bin via serial console:

tftp 0x80000000 sysupgrade.bin && erase 0x9f090000 +$filesize && cp.b $fileaddr 0x9f090000 $filesize

Signed-off-by: Weijie Gao <hackpascal@gmail.com>
---
 .../etc/hotplug.d/firmware/11-ath10k-caldata       | 52 ++++++++++++++++++++++
 1 file changed, 52 insertions(+)

(limited to 'target/linux/ath79/base-files/etc/hotplug.d/firmware')

diff --git a/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index 2bbe592..d862f61 100644
--- a/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -1,5 +1,23 @@
 #!/bin/sh
 
+. /lib/functions/k2t.sh
+
+# xor multiple hex values of the same length
+xor() {
+	local val
+	local ret="0x$1"
+	local retlen=${#1}
+
+	shift
+	while [ -n "$1" ]; do
+		val="0x$1"
+		ret=$((ret ^ val))
+		shift
+	done
+
+	printf "%0${retlen}x" "$ret"
+}
+
 ath10kcal_die() {
 	echo "ath10cal: " "$*"
 	exit 1
@@ -36,6 +54,29 @@ ath10kcal_patch_mac() {
 	macaddr_2bin $mac | dd of=/lib/firmware/$FIRMWARE conv=notrunc bs=1 seek=6 count=6
 }
 
+ath10kcal_patch_mac_crc() {
+	local mac=$1
+	local mac_offset=6
+	local chksum_offset=2
+	local xor_mac
+	local xor_fw_mac
+	local xor_fw_chksum
+
+	xor_fw_mac=$(hexdump -v -n 6 -s $mac_offset -e '/1 "%02x"' /lib/firmware/$FIRMWARE)
+	xor_fw_mac="${xor_fw_mac:0:4} ${xor_fw_mac:4:4} ${xor_fw_mac:8:4}"
+
+	ath10kcal_patch_mac "$mac" && {
+		xor_mac=${mac//:/}
+		xor_mac="${xor_mac:0:4} ${xor_mac:4:4} ${xor_mac:8:4}"
+
+		xor_fw_chksum=$(hexdump -v -n 2 -s $chksum_offset -e '/1 "%02x"' /lib/firmware/$FIRMWARE)
+		xor_fw_chksum=$(xor $xor_fw_chksum $xor_fw_mac $xor_mac)
+
+		printf "%b" "\x${xor_fw_chksum:0:2}\x${xor_fw_chksum:2:2}" | \
+			dd of=/lib/firmware/$FIRMWARE conv=notrunc bs=1 seek=$chksum_offset count=2
+	}
+}
+
 [ -e /lib/firmware/$FIRMWARE ] && exit 0
 
 . /lib/functions.sh
@@ -52,6 +93,17 @@ case "$FIRMWARE" in
 		;;
 	esac
 	;;
+"ath10k/pre-cal-pci-0000:00:00.0.bin")
+	case $board in
+	phicomm,k2t)
+		ath10kcal_extract "art" 20480 12064
+		ath10kcal_patch_mac_crc $(k2t_get_mac "5g_mac")
+
+		ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
+			/lib/firmware/ath10k/QCA9888/hw2.0/board.bin
+		;;
+	esac
+	;;
 *)
 	exit 1
 	;;
-- 
cgit v1.1