From fce21ae4ccfcee0c28fb18f5507e145fb0b02dec Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= Date: Wed, 22 Mar 2017 21:09:00 +0100 Subject: brcm2708: rename all patches from raspberrypi git tree to use 950 prefix MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Right now all brcm2708 patches are extracted from the non-mainline raspberrypi/linux git tree. Many of them are hacks and/or are unneeded in LEDE. Raspberry Pi is getting better and better mainline support so it would be nice to finally start maintaining patches in a cleaner way: 1) Backport patches accepted in upstream tree 2) Start using upstream drivers 3) Pick only these patches that are needed for more complete support Handling above tasks requires grouping patches - ideally using the same prefixes as generic ones. It means we should rename existing patches to use some high prefix. This will allow e.g. use 0xx for backported code. Signed-off-by: Rafał Miłecki Acked-by: Florian Fainelli Acked-by: Stijn Tintel --- ...35-dt-Add-the-DSI-module-nodes-and-clocks.patch | 101 --------------------- 1 file changed, 101 deletions(-) delete mode 100644 target/linux/brcm2708/patches-4.9/0160-ARM-bcm2835-dt-Add-the-DSI-module-nodes-and-clocks.patch (limited to 'target/linux/brcm2708/patches-4.9/0160-ARM-bcm2835-dt-Add-the-DSI-module-nodes-and-clocks.patch') diff --git a/target/linux/brcm2708/patches-4.9/0160-ARM-bcm2835-dt-Add-the-DSI-module-nodes-and-clocks.patch b/target/linux/brcm2708/patches-4.9/0160-ARM-bcm2835-dt-Add-the-DSI-module-nodes-and-clocks.patch deleted file mode 100644 index 444c287..0000000 --- a/target/linux/brcm2708/patches-4.9/0160-ARM-bcm2835-dt-Add-the-DSI-module-nodes-and-clocks.patch +++ /dev/null @@ -1,101 +0,0 @@ -From fc25cd03ca1c696dacb74d2006c0f176ce800566 Mon Sep 17 00:00:00 2001 -From: Eric Anholt -Date: Tue, 13 Dec 2016 15:15:10 -0800 -Subject: [PATCH] ARM: bcm2835: dt: Add the DSI module nodes and clocks. - -The modules stay disabled by default, and if you want to enable DSI -you'll need an overlay that connects a panel to it. - -Signed-off-by: Eric Anholt ---- - arch/arm/boot/dts/bcm2835-rpi.dtsi | 8 +++++++ - arch/arm/boot/dts/bcm283x.dtsi | 49 +++++++++++++++++++++++++++++++++++--- - 2 files changed, 54 insertions(+), 3 deletions(-) - ---- a/arch/arm/boot/dts/bcm2835-rpi.dtsi -+++ b/arch/arm/boot/dts/bcm2835-rpi.dtsi -@@ -84,3 +84,11 @@ - power-domains = <&power RPI_POWER_DOMAIN_HDMI>; - status = "okay"; - }; -+ -+&dsi0 { -+ power-domains = <&power RPI_POWER_DOMAIN_DSI0>; -+}; -+ -+&dsi1 { -+ power-domains = <&power RPI_POWER_DOMAIN_DSI1>; -+}; ---- a/arch/arm/boot/dts/bcm283x.dtsi -+++ b/arch/arm/boot/dts/bcm283x.dtsi -@@ -93,10 +93,13 @@ - #clock-cells = <1>; - reg = <0x7e101000 0x2000>; - -- /* CPRMAN derives everything from the platform's -- * oscillator. -+ /* CPRMAN derives almost everything from the -+ * platform's oscillator. However, the DSI -+ * pixel clocks come from the DSI analog PHY. - */ -- clocks = <&clk_osc>; -+ clocks = <&clk_osc>, -+ <&dsi0 0>, <&dsi0 1>, <&dsi0 2>, -+ <&dsi1 0>, <&dsi1 1>, <&dsi1 2>; - }; - - rng@7e104000 { -@@ -188,6 +191,26 @@ - interrupts = <2 14>; /* pwa1 */ - }; - -+ dsi0: dsi@7e209000 { -+ compatible = "brcm,bcm2835-dsi0"; -+ reg = <0x7e209000 0x78>; -+ interrupts = <2 4>; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ #clock-cells = <1>; -+ -+ clocks = <&clocks BCM2835_PLLA_DSI0>, -+ <&clocks BCM2835_CLOCK_DSI0E>, -+ <&clocks BCM2835_CLOCK_DSI0P>; -+ clock-names = "phy", "escape", "pixel"; -+ -+ clock-output-names = "dsi0_byte", -+ "dsi0_ddr2", -+ "dsi0_ddr"; -+ -+ status = "disabled"; -+ }; -+ - aux: aux@0x7e215000 { - compatible = "brcm,bcm2835-aux"; - #clock-cells = <1>; -@@ -247,6 +270,26 @@ - interrupts = <2 1>; - }; - -+ dsi1: dsi@7e700000 { -+ compatible = "brcm,bcm2835-dsi1"; -+ reg = <0x7e700000 0x8c>; -+ interrupts = <2 12>; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ #clock-cells = <1>; -+ -+ clocks = <&clocks BCM2835_PLLD_DSI1>, -+ <&clocks BCM2835_CLOCK_DSI1E>, -+ <&clocks BCM2835_CLOCK_DSI1P>; -+ clock-names = "phy", "escape", "pixel"; -+ -+ clock-output-names = "dsi1_byte", -+ "dsi1_ddr2", -+ "dsi1_ddr"; -+ -+ status = "disabled"; -+ }; -+ - i2c1: i2c@7e804000 { - compatible = "brcm,bcm2835-i2c"; - reg = <0x7e804000 0x1000>; -- cgit v1.1