From 08714738d2c8d7710f8fd2b7deac795f49e7d7c2 Mon Sep 17 00:00:00 2001
From: Mathew McBride <matt@traverse.com.au>
Date: Mon, 30 Apr 2018 22:42:39 +1000
Subject: layerscape: add Traverse LS1043-S support

The Traverse LS1043-S board is a router board based on
NXP/Freescale's LS1043 SoC, with 4x1GBase-T, 1 SFP and 1 SFP+,
as well as miniPCIe and M.2 LTE.

Unlike the Layerscape reference boards, the LS1043-S board has
NAND flash and uses the mainline U-Boot.

This patch implements support for the LS1043-S board, as well as
the earlier LS1043-V board. It is our intention that all boards
in this family (LS1043-S and later, Five64) will boot the same binary.

Not included in this patchset are the hwmon drivers not in the kernel
(emc1704,pac1934) or the bootloader.

Signed-off-by: Mathew McBride <matt@traverse.com.au>
---
 .../linux/layerscape/base-files/etc/board.d/01_led | 25 +++++++++++++++++++
 .../layerscape/base-files/etc/board.d/02_network   | 21 ++++++++++++++++
 .../base-files/etc/board.d/03_gpio_switches        | 28 ++++++++++++++++++++++
 3 files changed, 74 insertions(+)
 create mode 100755 target/linux/layerscape/base-files/etc/board.d/01_led
 create mode 100755 target/linux/layerscape/base-files/etc/board.d/02_network
 create mode 100755 target/linux/layerscape/base-files/etc/board.d/03_gpio_switches

(limited to 'target/linux/layerscape/base-files/etc')

diff --git a/target/linux/layerscape/base-files/etc/board.d/01_led b/target/linux/layerscape/base-files/etc/board.d/01_led
new file mode 100755
index 0000000..b9b62a0
--- /dev/null
+++ b/target/linux/layerscape/base-files/etc/board.d/01_led
@@ -0,0 +1,25 @@
+#!/bin/sh
+#
+# Copyright (C) 2015 OpenWrt.org
+#
+
+. /lib/functions/uci-defaults.sh
+
+board_config_update
+
+board=$(board_name)
+
+case "$board" in
+traverse,ls1043v)
+	ucidef_set_led_netdev "wan" "WAN LED" "ls1043v:yellow:wan" "eth4"
+	;;
+traverse,ls1043s)
+	ucidef_set_led_netdev "wan" "WAN LED" "ls1043s:yellow:wan" "eth4"
+	ucidef_set_led_netdev "xgact" "10G Activity" "ls1043s:yellow:10gact" "eth6"
+	ucidef_set_led_netdev "xglink" "10G Link" "ls1043s:green:10glink" "eth6"
+	;;
+esac
+
+board_config_flush
+
+exit 0
diff --git a/target/linux/layerscape/base-files/etc/board.d/02_network b/target/linux/layerscape/base-files/etc/board.d/02_network
new file mode 100755
index 0000000..c50b4a3
--- /dev/null
+++ b/target/linux/layerscape/base-files/etc/board.d/02_network
@@ -0,0 +1,21 @@
+#!/bin/sh
+
+. /lib/functions/system.sh
+. /lib/functions/uci-defaults.sh
+
+board_config_update
+
+case "$(board_name)" in
+	traverse,ls1043v)
+		ucidef_set_interface_lan "eth0 eth1 eth2 eth3"
+		ucidef_set_interface_wan "eth4"
+		;;
+	traverse,ls1043s)
+		ucidef_set_interface_lan "eth0 eth1 eth2 eth3 eth6"
+		ucidef_set_interface_wan "eth4"
+		;;
+esac
+
+board_config_flush
+
+exit 0
diff --git a/target/linux/layerscape/base-files/etc/board.d/03_gpio_switches b/target/linux/layerscape/base-files/etc/board.d/03_gpio_switches
new file mode 100755
index 0000000..7f9da08
--- /dev/null
+++ b/target/linux/layerscape/base-files/etc/board.d/03_gpio_switches
@@ -0,0 +1,28 @@
+#!/bin/sh
+#
+# Copyright (C) 2015 OpenWrt.org
+#
+
+. /lib/functions/uci-defaults.sh
+
+board_config_update
+
+board=$(board_name)
+
+case "$board" in
+traverse,ls1043v)
+	ucidef_add_gpio_switch "lte_reset" "LTE Reset" "377"
+	ucidef_add_gpio_switch "lte_disable" "LTE Airplane mode" "378"
+	;;
+traverse,ls1043s)
+	ucidef_add_gpio_switch "tensfp_txdisable" "SFP+ TX Disable" "378"
+	ucidef_add_gpio_switch "gigsfp_txdisable" "SFP TX Disable" "381"
+	ucidef_add_gpio_switch "lte_reset" "LTE Reset" "502"
+	ucidef_add_gpio_switch "lte_disable" "LTE Airplane Mode" "394"
+	ucidef_add_gpio_switch "lte_power" "LTE Power" "395"
+	;;
+esac
+
+board_config_flush
+
+exit 0
-- 
cgit v1.1