From 41ba4b04c84a80a441b30e167eab0d45d3b6c009 Mon Sep 17 00:00:00 2001 From: John Crispin Date: Fri, 1 Apr 2016 07:11:18 +0000 Subject: mediatek: update patches add fixes for * ethernet * cpufreq * nand * a7-timer Signed-off-by: John Crispin SVN-Revision: 49098 --- ...k-device-tree-docs-for-MTK-Smart-Device-G.patch | 64 ---------------------- 1 file changed, 64 deletions(-) delete mode 100644 target/linux/mediatek/patches-4.4/0064-mtd-mediatek-device-tree-docs-for-MTK-Smart-Device-G.patch (limited to 'target/linux/mediatek/patches-4.4/0064-mtd-mediatek-device-tree-docs-for-MTK-Smart-Device-G.patch') diff --git a/target/linux/mediatek/patches-4.4/0064-mtd-mediatek-device-tree-docs-for-MTK-Smart-Device-G.patch b/target/linux/mediatek/patches-4.4/0064-mtd-mediatek-device-tree-docs-for-MTK-Smart-Device-G.patch deleted file mode 100644 index 533ff56..0000000 --- a/target/linux/mediatek/patches-4.4/0064-mtd-mediatek-device-tree-docs-for-MTK-Smart-Device-G.patch +++ /dev/null @@ -1,64 +0,0 @@ -From 91f978e8a8f27eb9988d33904eaba55309b6c0b9 Mon Sep 17 00:00:00 2001 -From: Jorge Ramirez-Ortiz -Date: Wed, 2 Mar 2016 12:00:11 -0500 -Subject: [PATCH 64/66] mtd: mediatek: device tree docs for MTK Smart Device - Gen1 NAND - -This patch adds documentation support for Smart Device Gen1 type of -NAND controllers. - -Mediatek's SoC 2701 is one of the SoCs that implements this controller. - -Signed-off-by: Jorge Ramirez-Ortiz ---- - .../devicetree/bindings/mtd/mtksdg1-nand.txt | 38 ++++++++++++++++++++ - 1 file changed, 38 insertions(+) - create mode 100644 Documentation/devicetree/bindings/mtd/mtksdg1-nand.txt - -diff --git a/Documentation/devicetree/bindings/mtd/mtksdg1-nand.txt b/Documentation/devicetree/bindings/mtd/mtksdg1-nand.txt -new file mode 100644 -index 0000000..129d17b ---- /dev/null -+++ b/Documentation/devicetree/bindings/mtd/mtksdg1-nand.txt -@@ -0,0 +1,38 @@ -+MTK Smart Device SoCs NAND controller DT binding -+ -+Required properties: -+- compatible: Should be "mediatek,mt2701-nfc". -+- reg: The first contains base physical address and size of -+ NAND controller's registers. The second contains base -+ physical address and size of NAND ECC engine. -+- interrupts: the NFC NFI interrupt, and the NFC ECC interrupt -+- clocks: NAND controller clocks. -+- clock-names: NAND controller clocks internal name. -+- vmch-supply: NAND power supply. -+- #address-cells: Partition address, should be set 1. -+- #size-cells: Partition size, should be set 1. -+ -+Optional properties: -+ -+nand-on-flash-bbt: Use a flash based bad block table. -+ -+Optional subnodes: -+- Partitions, see Documentation/devicetree/bindings/mtd/partition.txt -+ -+Example: -+ -+ nand: nand@1100d000 { -+ compatible = "mediatek,mt2701-nfc"; -+ reg = <0 0x1100d000 0 0x1000>, <0 0x1100e000 0 0x1000>; -+ interrupts = , -+ ; -+ clocks = <&pericfg CLK_PERI_NFI>, <&pericfg CLK_PERI_NFI_ECC>, -+ <&pericfg CLK_PERI_NFI_PAD>; -+ clock-names = "nfi_ck", "nfi_ecc_ck", "nfi_pad_ck"; -+ vmch-supply = <&mt6323_vmch_reg>; -+ status = "disabled"; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ -+ ... -+ }; --- -1.7.10.4 - -- cgit v1.1