From 58e0673900ea585b03d3cc2f8917667faa3f977f Mon Sep 17 00:00:00 2001 From: Zoltan HERPAI Date: Wed, 6 Dec 2017 15:43:55 +0100 Subject: ramips: add support for Asus RT-N11P / RT-N12+ / RT-N12E b1 This is a variant of the MT7620N-based Asus routers. Specifications: - MT7620N (580 MHz) - 32 MB RAM - 8 MB Flash - 5x 10/100Mbps Ethernet (built-in switch) - 2.4 GHz WLAN - 2x external, non-detachable antennas - UART (J2) header on PCB (115200 8n1) Flash instructions: 1. Configure PC with static IP 192.168.1.75/24 2. Connect PC with one of LAN ports, press the reset button, power up the router and keep button pressed for around 6-7 seconds. All 4 LEDs will start to blink, which is when the router will accept firmware files via TFTP. No known limitations on firmware filenames, just send it with a TFTP client to 192.168.1.1. 3. Router will download file from server, write it to flash and reboot. Signed-off-by: Zoltan HERPAI --- target/linux/ramips/base-files/lib/ramips.sh | 3 +++ target/linux/ramips/base-files/lib/upgrade/platform.sh | 1 + 2 files changed, 4 insertions(+) (limited to 'target/linux/ramips/base-files/lib') diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh index 76ca3d1..bf19a4c 100755 --- a/target/linux/ramips/base-files/lib/ramips.sh +++ b/target/linux/ramips/base-files/lib/ramips.sh @@ -460,6 +460,9 @@ ramips_board_detect() { *"RT-N10+") name="rt-n10-plus" ;; + *"RT-N12+") + name="rt-n12p" + ;; *"RT-N13U") name="rt-n13u" ;; diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh index 0d5b6bb..3181da2 100755 --- a/target/linux/ramips/base-files/lib/upgrade/platform.sh +++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh @@ -130,6 +130,7 @@ platform_check_image() { rt-ac51u|\ rt-g32-b1|\ rt-n10-plus|\ + rt-n12p|\ rt-n13u|\ rt-n14u|\ rt-n15|\ -- cgit v1.1