move package/linux into target/linux, use wbx' new kernel code. support building images with more than one kernel, split kernel module parts off of packages that use their own kernel modules (fuse, shfs, openswan). some cleanup in the image building process in target/. image builder is disabled for now, needs some fixing.

SVN-Revision: 1085

1 files changed, 0 insertions, 117 deletions

diff --git a/openwrt/package/linux/kernel-source/arch/mips/brcm-boards/bcm947xx/time.c b/openwrt/package/linux/kernel-source/arch/mips/brcm-boards/bcm947xx/time.c
deleted file mode 100644
index 9b75746..0000000
--- a/openwrt/package/linux/kernel-source/arch/mips/brcm-boards/bcm947xx/time.c
+++ /dev/null
@@ -1,117 +0,0 @@
-/*
- * Copyright 2004, Broadcom Corporation
- * All Rights Reserved.
- * 
- * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
- * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
- * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
- * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
- *
- * $Id$
- */
-#include <linux/config.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/serial_reg.h>
-#include <linux/interrupt.h>
-#include <asm/addrspace.h>
-#include <asm/io.h>
-#include <asm/time.h>
-
-#include <typedefs.h>
-#include <bcmnvram.h>
-#include <sbconfig.h>
-#include <sbextif.h>
-#include <sbutils.h>
-#include <sbmips.h>
-
-/* Global SB handle */
-extern void *bcm947xx_sbh;
-extern spinlock_t bcm947xx_sbh_lock;
-
-/* Convenience */
-#define sbh bcm947xx_sbh
-#define sbh_lock bcm947xx_sbh_lock
-
-extern int panic_timeout;
-static int watchdog = 0;
-static u8 *mcr = NULL;
-
-void __init
-bcm947xx_time_init(void)
-{
-	unsigned int hz;
-	extifregs_t *eir;
-
-	/*
-	 * Use deterministic values for initial counter interrupt
-	 * so that calibrate delay avoids encountering a counter wrap.
-	 */
-	write_c0_count(0);
-	write_c0_compare(0xffff);
-
-	if (!(hz = sb_mips_clock(sbh)))
-		hz = 100000000;
-
-	printk("CPU: BCM%04x rev %d at %d MHz\n", sb_chip(sbh), sb_chiprev(sbh),
-	       (hz + 500000) / 1000000);
-
-	/* Set MIPS counter frequency for fixed_rate_gettimeoffset() */
-	mips_hpt_frequency = hz / 2;
-
-	/* Set watchdog interval in ms */
-	watchdog = simple_strtoul(nvram_safe_get("watchdog"), NULL, 0);
-	
-   	/* Please set the watchdog to 3 sec if it is less than 3 but not equal to 0 */
-	if (watchdog > 0) {
-		if (watchdog < 3000)
-			watchdog = 3000;
-	}
-
-
-	/* Set panic timeout in seconds */
-	panic_timeout = watchdog / 1000;
-
-	/* Setup blink */
-	if ((eir = sb_setcore(sbh, SB_EXTIF, 0))) {
-		sbconfig_t *sb = (sbconfig_t *)((unsigned int) eir + SBCONFIGOFF);
-		unsigned long base = EXTIF_CFGIF_BASE(sb_base(readl(&sb->sbadmatch1)));
-		mcr = (u8 *) ioremap_nocache(base + UART_MCR, 1);
-	}
-}
-
-static void
-bcm947xx_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
-{
-	/* Generic MIPS timer code */
-	timer_interrupt(irq, dev_id, regs);
-
-	/* Set the watchdog timer to reset after the specified number of ms */
-	if (watchdog > 0)
-		sb_watchdog(sbh, WATCHDOG_CLOCK / 1000 * watchdog);
-
-#ifdef	CONFIG_HWSIM
-	(*((int *)0xa0000f1c))++;
-#else
-	/* Blink one of the LEDs in the external UART */
-	if (mcr && !(jiffies % (HZ/2)))
-		writeb(readb(mcr) ^ UART_MCR_OUT2, mcr);
-#endif
-}
-
-static struct irqaction bcm947xx_timer_irqaction = {
-	bcm947xx_timer_interrupt,
-	SA_INTERRUPT,
-	0,
-	"timer",
-	NULL,
-	NULL
-};
-
-void __init
-bcm947xx_timer_setup(struct irqaction *irq)
-{
-	/* Enable the timer interrupt */
-	setup_irq(7, &bcm947xx_timer_irqaction);
-}