layerscape: add 64b/32b target for ls1012ardb device

The QorIQ LS1012A processor, optimized for battery-backed or
USB-powered, integrates a single ARM Cortex-A53 core with a hardware
packet forwarding engine and high-speed interfaces to deliver
line-rate networking performance.
QorIQ LS1012A Reference Design System (LS1012ARDB) is a high-performance
development platform, with a complete debugging environment.
The LS1012ARDB board supports the QorIQ LS1012A processor and is
optimized to support the high-bandwidth DDR3L memory and
a full complement of high-speed SerDes ports.

LEDE/OPENWRT will auto strip executable program file while make. So we
need select CONFIG_NO_STRIP=y while make menuconfig to avoid the ppfe network
fiemware be destroyed, then run make to build ls1012ardb firmware.

The fsl-quadspi flash with jffs2 fs is unstable and arise some failed message.
This issue have noticed the IP owner for investigate, hope he can solve it
earlier. So the ls1012ardb now also provide a xx-firmware.ext4.bin as default
firmware, and the uboot bootcmd will run wrtboot_ext4rfs for "rootfstype=ext4"
bootargs.

Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>

1 files changed, 49 insertions, 0 deletions

diff --git a/target/linux/layerscape/patches-4.4/1113-mtd-spi-nor-fsl-quad-move-mtd_device_register-to-the.patch b/target/linux/layerscape/patches-4.4/1113-mtd-spi-nor-fsl-quad-move-mtd_device_register-to-the.patch
new file mode 100644
index 0000000..f54f985
--- /dev/null
+++ b/target/linux/layerscape/patches-4.4/1113-mtd-spi-nor-fsl-quad-move-mtd_device_register-to-the.patch
@@ -0,0 +1,49 @@
+From 6f1195d231ab576809fe2f4cff44a6e48cff2457 Mon Sep 17 00:00:00 2001
+From: Yutang Jiang <yutang.jiang@nxp.com>
+Date: Fri, 2 Sep 2016 22:00:16 +0800
+Subject: [PATCH 113/113] mtd: spi-nor: fsl-quad: move mtd_device_register to
+ the last of probe
+
+After call mtd_device_register, the mtd devices should be workable immediately.
+If before finish all of init work call the mtd_device_register, it will not
+respond work request timely.
+
+For example, openwrt/lede have a AUTO split special flash partitions mechanism
+while mtd driver register. So, before call mtd_device_register, must let all of
+init work ready.
+
+Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>
+---
+ drivers/mtd/spi-nor/fsl-quadspi.c |   14 ++++++++++----
+ 1 file changed, 10 insertions(+), 4 deletions(-)
+
+--- a/drivers/mtd/spi-nor/fsl-quadspi.c
++++ b/drivers/mtd/spi-nor/fsl-quadspi.c
+@@ -1280,10 +1280,6 @@ static int fsl_qspi_probe(struct platfor
+ 		if (ret)
+ 			goto mutex_failed;
+ 
+-		ret = mtd_device_register(mtd, NULL, 0);
+-		if (ret)
+-			goto mutex_failed;
+-
+ 		/* Set the correct NOR size now. */
+ 		if (q->nor_size == 0) {
+ 			q->nor_size = mtd->size;
+@@ -1313,6 +1309,16 @@ static int fsl_qspi_probe(struct platfor
+ 		goto last_init_failed;
+ 
+ 	fsl_qspi_clk_disable_unprep(q);
++
++	for (i = 0; i < q->nor_num; i++) {
++		/* skip the holes */
++		if (!q->has_second_chip)
++			i *= 2;
++
++		ret = mtd_device_register(&q->nor[i].mtd, NULL, 0);
++		if (ret)
++			goto last_init_failed;
++	}
+ 	return 0;
+ 
+ last_init_failed: