target/linux : drop many arch

94 files changed, 0 insertions, 5691 deletions

diff --git a/target/linux/x86/Makefile b/target/linux/x86/Makefile
deleted file mode 100644
index 32eafdf..0000000
--- a/target/linux/x86/Makefile
+++ /dev/null
@@ -1,26 +0,0 @@
-#
-# Copyright (C) 2006-2011 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-include $(TOPDIR)/rules.mk
-
-ARCH:=i386
-BOARD:=x86
-BOARDNAME:=x86
-FEATURES:=squashfs ext4 vdi vmdk pcmcia targz
-SUBTARGETS=generic olpc xen_domu ep80579 net5501 kvm_guest geos alix2 thincan \
-	   rdc
-
-LINUX_VERSION:=3.10.49
-
-KERNELNAME:=bzImage
-
-include $(INCLUDE_DIR)/target.mk
-
-$(eval $(call BuildTarget))
-
-$(eval $(call $(if $(CONFIG_TARGET_ROOTFS_ISO),RequireCommand,Ignore),mkisofs, \
-   	Please install mkisofs. \
-))
diff --git a/target/linux/x86/alix2/base-files/etc/config/network b/target/linux/x86/alix2/base-files/etc/config/network
deleted file mode 100644
index 505628e..0000000
--- a/target/linux/x86/alix2/base-files/etc/config/network
+++ /dev/null
@@ -1,28 +0,0 @@
-# Copyright (C) 2011 OpenWrt.org
-
-config interface loopback
-	option ifname	lo
-	option proto	static
-	option ipaddr	127.0.0.1
-	option netmask	255.0.0.0
-
-# N.B. the labels on the Netgate boxes actually reverse the LAN and WAN
-# port markings.
-config interface lan
-	option ifname	eth1
-	option type 	bridge
-	option proto	static
-	option ipaddr	192.168.1.1
-	option netmask	255.255.255.0
-	option ip6assign 60
-
-config interface wan
-	option ifname	eth0
-	option proto	dhcp
-
-config interface wan6
-	option ifname   @wan
-	option proto    dhcpv6
-
-config globals globals
-	option ula_prefix auto
diff --git a/target/linux/x86/alix2/base-files/etc/config/system b/target/linux/x86/alix2/base-files/etc/config/system
deleted file mode 100644
index 473586e..0000000
--- a/target/linux/x86/alix2/base-files/etc/config/system
+++ /dev/null
@@ -1,29 +0,0 @@
-config system
-	option hostname	OpenWrt
-	option timezone	UTC
-
-config timeserver ntp
-	list server	0.openwrt.pool.ntp.org
-	list server	1.openwrt.pool.ntp.org
-	list server	2.openwrt.pool.ntp.org
-	list server	3.openwrt.pool.ntp.org
-
-config led
-	option default	1
-	option name	LAN
-	option sysfs	'alix:1'
-	option trigger	netdev
-	option mode	'tx rx'
-	option dev	'br-lan'
-
-config led
-	option default	1
-	option name	WiFi
-	option sysfs	'alix:2'
-	option trigger	'phy0tpt'
-
-config led
-	option default	0
-	option name	Heartbeat
-	option sysfs	'alix:3'
-	option trigger	'heartbeat'
diff --git a/target/linux/x86/alix2/base-files/etc/hotplug.d/button/50-reboot b/target/linux/x86/alix2/base-files/etc/hotplug.d/button/50-reboot
deleted file mode 100644
index bf893c1..0000000
--- a/target/linux/x86/alix2/base-files/etc/hotplug.d/button/50-reboot
+++ /dev/null
@@ -1,13 +0,0 @@
-#!/bin/sh
-
-logger -t button -p daemon.info "$BUTTON/$ACTION"
-
-case "$BUTTON/$ACTION" in
-
-reset/released)
-  reboot -f
-  ;;
-
-esac
-
-exit 0
diff --git a/target/linux/x86/alix2/config-3.10 b/target/linux/x86/alix2/config-3.10
deleted file mode 100644
index 3442234..0000000
--- a/target/linux/x86/alix2/config-3.10
+++ /dev/null
@@ -1,24 +0,0 @@
-CONFIG_ALIX=y
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DMI=y
-CONFIG_DMIID=y
-# CONFIG_DMI_SYSFS is not set
-# CONFIG_GEOS is not set
-CONFIG_GPIOLIB=y
-CONFIG_GPIO_SYSFS=y
-# CONFIG_HIGHMEM64G is not set
-CONFIG_HWMON=y
-# CONFIG_LEDS_CLEVO_MAIL is not set
-# CONFIG_M486 is not set
-# CONFIG_MATH_EMULATION is not set
-CONFIG_MGEODE_LX=y
-CONFIG_NLS=y
-CONFIG_PATA_CS5536=y
-CONFIG_PCI_LABEL=y
-# CONFIG_SCx200 is not set
-CONFIG_THERMAL_HWMON=y
-CONFIG_X86_CMOV=y
-CONFIG_X86_DEBUGCTLMSR=y
-CONFIG_X86_TSC=y
-CONFIG_X86_USE_3DNOW=y
-CONFIG_X86_USE_PPRO_CHECKSUM=y
diff --git a/target/linux/x86/alix2/target.mk b/target/linux/x86/alix2/target.mk
deleted file mode 100644
index b5d0117..0000000
--- a/target/linux/x86/alix2/target.mk
+++ /dev/null
@@ -1,32 +0,0 @@
-BOARDNAME:=PCEngines alix2
-FEATURES:=squashfs ext4 pci usb gpio
-DEFAULT_PACKAGES += \
-			kmod-crypto-hw-geode kmod-crypto-ocf kmod-crypto-aes kmod-crypto-cbc \
-			kmod-gpio-cs5535-new kmod-gpio-nsc \
-			kmod-wdt-geode kmod-cs5535-clockevt kmod-cs5535-mfgpt \
-			kmod-cs5536 \
-			kmod-hwmon-core kmod-hwmon-lm90 \
-			kmod-via-rhine \
-			kmod-i2c-core kmod-i2c-gpio \
-			kmod-i2c-algo-bit kmod-i2c-algo-pca kmod-i2c-algo-pcf \
-			kmod-i2c-scx200-acb \
-			kmod-usb-core kmod-usb2 kmod-usb2-pci kmod-usb-ohci \
-			kmod-cfg80211 kmod-mac80211 \
-			kmod-mppe kmod-pppoe kmod-pppol2tp \
-			kmod-ath5k kmod-ath9k \
-			kmod-leds-gpio kmod-input-gpio-keys-polled \
-			kmod-button-hotplug \
-			kmod-ledtrig-heartbeat kmod-ledtrig-gpio \
-			kmod-ledtrig-netdev \
-			kmod-cpu-msr hwclock wpad
-CS5535_MASK:=0x0b000042
-
-CPU_TYPE := geode
-
-define Target/Description
-	Build firmware images for PCEngines alix2 board
-endef
-
-define KernelPackage/gpio-cs5535-new/install
-     sed -i -r -e 's/$$$$$$$$/ mask=$(CS5535_MASK)/' $(1)/etc/modules.d/??-gpio-cs5535-new
-endef
diff --git a/target/linux/x86/base-files.mk b/target/linux/x86/base-files.mk
deleted file mode 100644
index 6c6e6f1..0000000
--- a/target/linux/x86/base-files.mk
+++ /dev/null
@@ -1,6 +0,0 @@
-ifneq ($(CONFIG_TARGET_x86_generic_Soekris48xx)$(CONFIG_TARGET_x86_generic_Soekris45xx),)
-define Package/base-files/install-target
-	rm -f $(1)/etc/config/network
-endef
-endif
-
diff --git a/target/linux/x86/base-files/etc/defconfig/net4801/network b/target/linux/x86/base-files/etc/defconfig/net4801/network
deleted file mode 100644
index 172d513..0000000
--- a/target/linux/x86/base-files/etc/defconfig/net4801/network
+++ /dev/null
@@ -1,24 +0,0 @@
-config interface loopback
-	option ifname	lo
-	option proto	static
-	option ipaddr	127.0.0.1
-	option netmask	255.0.0.0
-
-config interface lan
-	option ifname	eth1
-	option type	bridge
-	option proto	static
-	option ipaddr	192.168.1.1
-	option netmask	255.255.255.0
-	option ip6assign 60
-
-config interface wan
-	option ifname	eth0
-	option proto	dhcp
-
-config interface wan6
-	option ifname   @wan
-	option proto    dhcpv6
-
-config globals globals
-	option ula_prefix auto
diff --git a/target/linux/x86/base-files/etc/defconfig/net4826/network b/target/linux/x86/base-files/etc/defconfig/net4826/network
deleted file mode 100644
index 7c9fb63..0000000
--- a/target/linux/x86/base-files/etc/defconfig/net4826/network
+++ /dev/null
@@ -1,12 +0,0 @@
-config interface loopback
-	option ifname	lo
-	option proto	static
-	option ipaddr	127.0.0.1
-	option netmask	255.0.0.0
-
-config interface lan
-	option ifname	eth0
-	option type	bridge
-	option proto	static
-	option ipaddr	192.168.1.1
-	option netmask	255.255.255.0
diff --git a/target/linux/x86/base-files/etc/init.d/defconfig b/target/linux/x86/base-files/etc/init.d/defconfig
deleted file mode 100755
index 4b4f28f..0000000
--- a/target/linux/x86/base-files/etc/init.d/defconfig
+++ /dev/null
@@ -1,20 +0,0 @@
-#!/bin/sh /etc/rc.common
-#
-# Copyright (C) 2010 Thinktube Inc.
-#
-
-START=05
-
-start() {
-	. /lib/soekris.sh
-
-	local board=$(net48xx_board_name)
-
-	[ ! -d /etc/defconfig/$board ] && board="net4826"
-
-	for f in $( ls /etc/defconfig/$board ); do
-		if [ ! -e /etc/config/$f ]; then
-			cp /etc/defconfig/$board/$f /etc/config/
-		fi
-	done
-}
diff --git a/target/linux/x86/base-files/etc/inittab b/target/linux/x86/base-files/etc/inittab
deleted file mode 100644
index ca90fd8..0000000
--- a/target/linux/x86/base-files/etc/inittab
+++ /dev/null
@@ -1,4 +0,0 @@
-::sysinit:/etc/init.d/rcS S boot
-::shutdown:/etc/init.d/rcS K shutdown
-ttyS0::askfirst:/bin/ash --login
-tty1::askfirst:/bin/ash --login
diff --git a/target/linux/x86/base-files/lib/preinit/15_essential_fs_x86 b/target/linux/x86/base-files/lib/preinit/15_essential_fs_x86
deleted file mode 100644
index 5d54530..0000000
--- a/target/linux/x86/base-files/lib/preinit/15_essential_fs_x86
+++ /dev/null
@@ -1,8 +0,0 @@
-#!/bin/sh
-# Copyright (C) 2006-2010 OpenWrt.org
-# Copyright (C) 2010 Vertical Communications
-
-do_mount_procfs() {
-	mount -o noatime -t proc none /proc
-}
-
diff --git a/target/linux/x86/base-files/lib/preinit/20_check_iso b/target/linux/x86/base-files/lib/preinit/20_check_iso
deleted file mode 100644
index beff6eb..0000000
--- a/target/linux/x86/base-files/lib/preinit/20_check_iso
+++ /dev/null
@@ -1,5 +0,0 @@
-check_for_iso() {
-	grep -qE '/dev/root.*iso9660' /proc/mounts && ramoverlay
-}
-
-boot_hook_add preinit_mount_root check_for_iso
diff --git a/target/linux/x86/base-files/lib/preinit/79_move_config b/target/linux/x86/base-files/lib/preinit/79_move_config
deleted file mode 100644
index 0bffbab..0000000
--- a/target/linux/x86/base-files/lib/preinit/79_move_config
+++ /dev/null
@@ -1,22 +0,0 @@
-#!/bin/sh
-# Copyright (C) 2012 OpenWrt.org
-
-move_config() {
-	local rootfsdev
-	local rootfstype
-	
-	rootfstype="$(awk 'BEGIN { RS=" "; FS="="; } ($1 == "rootfstype") { print $2 }' < /proc/cmdline)"
-	case "$rootfstype" in
-		squashfs|jffs2)
-			rootfsdev="$(awk 'BEGIN { RS=" "; FS="="; } ($1 == "block2mtd.block2mtd") { print substr($2,1,index($2, ",")-1) }' < /proc/cmdline)";;
-		ext4)
-			rootfsdev="$(awk 'BEGIN { RS=" "; FS="="; } ($1 == "root") { print $2 }' < /proc/cmdline)";;
-	esac
-
-	mount -t ext4 -o rw,noatime "${rootfsdev%[0-9]}1" /mnt
-	mv -f /mnt/sysupgrade.tgz /
-	umount /mnt
-}
-
-boot_hook_add preinit_mount_root move_config
-
diff --git a/target/linux/x86/base-files/lib/soekris.sh b/target/linux/x86/base-files/lib/soekris.sh
deleted file mode 100755
index e416ad3..0000000
--- a/target/linux/x86/base-files/lib/soekris.sh
+++ /dev/null
@@ -1,19 +0,0 @@
-#!/bin/sh
-
-net48xx_board_name () {
-    local name
-    local pci=`wc -l /proc/bus/pci/devices`
-
-    case "$pci" in
-	*"8"*)
-	    name="net4826"
-	    ;;
-	*1[0-4]*)
-	    name="net4801"
-	    ;;
-	*)
-	    name="net4826"
-	    ;;
-    esac
-    echo $name
-}
diff --git a/target/linux/x86/base-files/lib/upgrade/platform.sh b/target/linux/x86/base-files/lib/upgrade/platform.sh
deleted file mode 100644
index a2dd20a..0000000
--- a/target/linux/x86/base-files/lib/upgrade/platform.sh
+++ /dev/null
@@ -1,44 +0,0 @@
-x86_get_rootfs() {
-	local rootfsdev
-	local rootfstype
-	
-	rootfstype="$(awk 'BEGIN { RS=" "; FS="="; } ($1 == "rootfstype") { print $2 }' < /proc/cmdline)"
-	case "$rootfstype" in
-		squashfs|jffs2)
-			rootfsdev="$(awk 'BEGIN { RS=" "; FS="="; } ($1 == "block2mtd.block2mtd") { print substr($2,1,index($2, ",")-1) }' < /proc/cmdline)";;
-		ext4)
-			rootfsdev="$(awk 'BEGIN { RS=" "; FS="="; } ($1 == "root") { print $2 }' < /proc/cmdline)";;
-	esac
-		
-	echo "$rootfstype:$rootfsdev"
-}
-
-platform_check_image() {
-	[ "$#" -gt 1 ] && return 1
-
-	case "$(get_magic_word "$1")" in
-		eb48|eb63) return 0;;
-		*)
-			echo "Invalid image type"
-			return 1
-		;;
-	esac
-}
-
-platform_copy_config() {
-	local rootfs="$(x86_get_rootfs)"
-	local rootfsdev="${rootfs##*:}"
-	
-	mount -t ext4 -o rw,noatime "${rootfsdev%[0-9]}1" /mnt
-	cp -af "$CONF_TAR" /mnt/
-	umount /mnt
-}
-
-platform_do_upgrade() {
-	local rootfs="$(x86_get_rootfs)"
-	local rootfsdev="${rootfs##*:}"
-
-	sync
-	[ -b ${rootfsdev%[0-9]} ] && get_image "$@" | dd of=${rootfsdev%[0-9]} bs=4096 conv=fsync
-	sleep 1
-}
diff --git a/target/linux/x86/config-3.10 b/target/linux/x86/config-3.10
deleted file mode 100644
index 69f2f08..0000000
--- a/target/linux/x86/config-3.10
+++ /dev/null
@@ -1,414 +0,0 @@
-# CONFIG_60XX_WDT is not set
-# CONFIG_64BIT is not set
-# CONFIG_ACPI is not set
-# CONFIG_ACQUIRE_WDT is not set
-# CONFIG_ADVANTECH_WDT is not set
-# CONFIG_ALIM1535_WDT is not set
-# CONFIG_ALIX is not set
-CONFIG_AMD_NB=y
-CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
-CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig"
-CONFIG_ARCH_DISCARD_MEMBLOCK=y
-CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
-CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
-CONFIG_ARCH_HAS_CPU_AUTOPROBE=y
-CONFIG_ARCH_HAS_CPU_RELAX=y
-CONFIG_ARCH_HAS_DEBUG_STRICT_USER_COPY_CHECKS=y
-CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-ecx -fcall-saved-edx"
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set
-# CONFIG_ARCH_RANDOM is not set
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
-CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
-CONFIG_ARCH_SUPPORTS_MSI=y
-CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y
-CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
-CONFIG_ARCH_SUPPORTS_UPROBES=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_USES_PG_UNCACHED=y
-CONFIG_ARCH_USE_BUILTIN_BSWAP=y
-CONFIG_ARCH_WANTS_PROT_NUMA_PROT_NONE=y
-CONFIG_ARCH_WANT_FRAME_POINTERS=y
-CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-CONFIG_ATA=y
-CONFIG_ATA_GENERIC=y
-CONFIG_ATA_PIIX=y
-# CONFIG_AUDIT_ARCH is not set
-CONFIG_BINFMT_MISC=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_BOUNCE=y
-# CONFIG_CHROMEOS_LAPTOP is not set
-CONFIG_CLKBLD_I8253=y
-CONFIG_CLKEVT_I8253=y
-CONFIG_CLKSRC_I8253=y
-CONFIG_CLOCKSOURCE_WATCHDOG=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_COMPAT_VDSO=y
-# CONFIG_CPU5_WDT is not set
-CONFIG_CPU_FREQ=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
-# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
-CONFIG_CPU_FREQ_STAT=y
-CONFIG_CPU_FREQ_STAT_DETAILS=y
-CONFIG_CPU_FREQ_TABLE=y
-CONFIG_CPU_IDLE=y
-CONFIG_CPU_IDLE_GOV_LADDER=y
-CONFIG_CPU_SUP_AMD=y
-CONFIG_CPU_SUP_CENTAUR=y
-CONFIG_CPU_SUP_CYRIX_32=y
-CONFIG_CPU_SUP_INTEL=y
-CONFIG_CPU_SUP_TRANSMETA_32=y
-CONFIG_CPU_SUP_UMC_32=y
-CONFIG_CPU_THERMAL=y
-CONFIG_CRC16=y
-CONFIG_CRYPTO_CRC32C=y
-# CONFIG_CRYPTO_CRC32_PCLMUL is not set
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-# CONFIG_CRYPTO_SERPENT_SSE2_586 is not set
-CONFIG_DCACHE_WORD_ACCESS=y
-# CONFIG_DCDBAS is not set
-# CONFIG_DEBUG_BOOT_PARAMS is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_NMI_SELFTEST is not set
-# CONFIG_DEBUG_TLBFLUSH is not set
-# CONFIG_DEBUG_VIRTUAL is not set
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DEFAULT_IO_DELAY_TYPE=0
-# CONFIG_DELL_RBU is not set
-# CONFIG_DMI is not set
-CONFIG_DNOTIFY=y
-CONFIG_DOUBLEFAULT=y
-CONFIG_EARLY_PRINTK=y
-# CONFIG_EARLY_PRINTK_DBGP is not set
-# CONFIG_EDD is not set
-# CONFIG_EUROTECH_WDT is not set
-CONFIG_EXT4_FS=y
-# CONFIG_F71808E_WDT is not set
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_FIRMWARE_MEMMAP=y
-CONFIG_FIX_EARLYCON_MEM=y
-CONFIG_FS_MBCACHE=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_FIND_FIRST_BIT=y
-CONFIG_GENERIC_IO=y
-CONFIG_GENERIC_IOMAP=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_STRNCPY_FROM_USER=y
-CONFIG_GENERIC_STRNLEN_USER=y
-# CONFIG_GOOGLE_FIRMWARE is not set
-CONFIG_GPIO_DEVRES=y
-# CONFIG_HANGCHECK_TIMER is not set
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
-CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
-CONFIG_HAVE_AOUT=y
-CONFIG_HAVE_ARCH_JUMP_LABEL=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_ARCH_KMEMCHECK=y
-CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
-CONFIG_HAVE_ATOMIC_IOMAP=y
-# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
-CONFIG_HAVE_CMPXCHG_DOUBLE=y
-CONFIG_HAVE_CMPXCHG_LOCAL=y
-CONFIG_HAVE_C_RECORDMCOUNT=y
-CONFIG_HAVE_DEBUG_KMEMLEAK=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_DMA_CONTIGUOUS=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_GENERIC_HARDIRQS=y
-CONFIG_HAVE_HW_BREAKPOINT=y
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
-CONFIG_HAVE_KERNEL_BZIP2=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_HAVE_KERNEL_XZ=y
-CONFIG_HAVE_KPROBES_ON_FTRACE=y
-CONFIG_HAVE_KVM=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_HAVE_MEMBLOCK=y
-CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
-CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
-CONFIG_HAVE_MMIOTRACE_SUPPORT=y
-CONFIG_HAVE_NET_DSA=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_OPTPROBES=y
-CONFIG_HAVE_PCSPKR_PLATFORM=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_HAVE_PERF_EVENTS_NMI=y
-CONFIG_HAVE_PERF_REGS=y
-CONFIG_HAVE_PERF_USER_STACK_DUMP=y
-CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
-CONFIG_HAVE_SETUP_PER_CPU_AREA=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_HAVE_TEXT_POKE_SMP=y
-CONFIG_HAVE_UID16=y
-CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
-CONFIG_HAVE_USER_RETURN_NOTIFIER=y
-# CONFIG_HIGHMEM4G is not set
-CONFIG_HPET_EMULATE_RTC=y
-CONFIG_HPET_TIMER=y
-# CONFIG_HP_WATCHDOG is not set
-CONFIG_HT_IRQ=y
-# CONFIG_HUGETLBFS is not set
-CONFIG_HW_RANDOM=y
-CONFIG_HW_RANDOM_GEODE=y
-CONFIG_HW_RANDOM_VIA=y
-# CONFIG_HYPERVISOR_GUEST is not set
-CONFIG_HZ_PERIODIC=y
-CONFIG_I8253_LOCK=y
-# CONFIG_I8K is not set
-# CONFIG_IB700_WDT is not set
-# CONFIG_IBMASR is not set
-# CONFIG_IBM_RTL is not set
-# CONFIG_IE6XX_WDT is not set
-CONFIG_ILLEGAL_POINTER_VALUE=0
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_INSTRUCTION_DECODER=y
-# CONFIG_INTEL_POWERCLAMP is not set
-# CONFIG_IOMMU_STRESS is not set
-CONFIG_IO_DELAY_0X80=y
-# CONFIG_IO_DELAY_0XED is not set
-# CONFIG_IO_DELAY_NONE is not set
-CONFIG_IO_DELAY_TYPE_0X80=0
-CONFIG_IO_DELAY_TYPE_0XED=1
-CONFIG_IO_DELAY_TYPE_NONE=3
-CONFIG_IO_DELAY_TYPE_UDELAY=2
-# CONFIG_IO_DELAY_UDELAY is not set
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_WORK=y
-# CONFIG_ISA is not set
-CONFIG_ISA_DMA_API=y
-# CONFIG_ISCSI_IBFT_FIND is not set
-# CONFIG_IT8712F_WDT is not set
-# CONFIG_IT87_WDT is not set
-# CONFIG_ITCO_WDT is not set
-CONFIG_JBD2=y
-CONFIG_KALLSYMS=y
-CONFIG_KEXEC=y
-CONFIG_KTIME_SCALAR=y
-CONFIG_M486=y
-# CONFIG_M586 is not set
-# CONFIG_M586MMX is not set
-# CONFIG_M586TSC is not set
-# CONFIG_M686 is not set
-# CONFIG_MACHZ_WDT is not set
-CONFIG_MATH_EMULATION=y
-# CONFIG_MATOM is not set
-# CONFIG_MCORE2 is not set
-# CONFIG_MCRUSOE is not set
-# CONFIG_MCYRIXIII is not set
-# CONFIG_MEFFICEON is not set
-# CONFIG_MELAN is not set
-# CONFIG_MEMTEST is not set
-# CONFIG_MGEODEGX1 is not set
-# CONFIG_MGEODE_LX is not set
-# CONFIG_MICROCODE is not set
-# CONFIG_MK6 is not set
-# CONFIG_MK7 is not set
-# CONFIG_MK8 is not set
-CONFIG_MODULES_USE_ELF_REL=y
-# CONFIG_MPENTIUM4 is not set
-# CONFIG_MPENTIUMII is not set
-# CONFIG_MPENTIUMIII is not set
-# CONFIG_MPENTIUMM is not set
-CONFIG_MTD_BLOCK2MTD=y
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_TS5500 is not set
-CONFIG_MTRR=y
-# CONFIG_MTRR_SANITIZER is not set
-# CONFIG_MVIAC3_2 is not set
-# CONFIG_MVIAC7 is not set
-# CONFIG_MWINCHIP3D is not set
-# CONFIG_MWINCHIPC6 is not set
-CONFIG_NAMESPACES=y
-CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
-CONFIG_NEED_PER_CPU_KM=y
-CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
-CONFIG_NEED_SG_DMA_LENGTH=y
-# CONFIG_NET5501 is not set
-# CONFIG_NET_NS is not set
-CONFIG_NOHIGHMEM=y
-CONFIG_NO_BOOTMEM=y
-CONFIG_NR_CPUS=1
-# CONFIG_NSC_GPIO is not set
-CONFIG_NVRAM=y
-CONFIG_OLD_SIGACTION=y
-CONFIG_OLD_SIGSUSPEND3=y
-# CONFIG_OLPC is not set
-CONFIG_OPROFILE_NMI_TIMER=y
-# CONFIG_OPTIMIZE_INLINING is not set
-CONFIG_OUTPUT_FORMAT="elf32-i386"
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PC8736x_GPIO is not set
-# CONFIG_PC87413_WDT is not set
-CONFIG_PCI=y
-CONFIG_PCI_BIOS=y
-CONFIG_PCI_DIRECT=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_GOANY=y
-# CONFIG_PCI_GOBIOS is not set
-# CONFIG_PCI_GODIRECT is not set
-# CONFIG_PCI_GOMMCONFIG is not set
-CONFIG_PCI_MSI=y
-CONFIG_PCSPKR_PLATFORM=y
-CONFIG_PERF_EVENTS=y
-CONFIG_PHYSICAL_ALIGN=0x100000
-CONFIG_PHYSICAL_START=0x1000000
-CONFIG_POWER_SUPPLY=y
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_PROCESSOR_SELECT is not set
-CONFIG_PROC_PAGE_MONITOR=y
-# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
-# CONFIG_RCU_STALL_COMMON is not set
-CONFIG_RD_BZIP2=y
-CONFIG_RD_GZIP=y
-# CONFIG_RELOCATABLE is not set
-CONFIG_RTC_CLASS=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-# CONFIG_SAMSUNG_Q10 is not set
-# CONFIG_SBC7240_WDT is not set
-# CONFIG_SBC8360_WDT is not set
-# CONFIG_SBC_EPX_C3_WATCHDOG is not set
-# CONFIG_SC1200_WDT is not set
-# CONFIG_SC520_WDT is not set
-# CONFIG_SCHED_HRTICK is not set
-CONFIG_SCSI=y
-CONFIG_SCx200=y
-CONFIG_SCx200HR_TIMER=y
-# CONFIG_SCx200_GPIO is not set
-# CONFIG_SCx200_WDT is not set
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_CT82C710 is not set
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_LIBPS2=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SMSC37B787_WDT is not set
-# CONFIG_SMSC_SCH311X_WDT is not set
-CONFIG_SPARSEMEM_STATIC=y
-CONFIG_SPARSE_IRQ=y
-CONFIG_STRICT_DEVMEM=y
-CONFIG_SYSCTL_EXCEPTION_TRACE=y
-# CONFIG_TELCLOCK is not set
-CONFIG_THERMAL=y
-# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
-CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
-# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
-# CONFIG_THERMAL_EMULATION is not set
-# CONFIG_THERMAL_GOV_FAIR_SHARE is not set
-CONFIG_THERMAL_GOV_STEP_WISE=y
-# CONFIG_THERMAL_GOV_USER_SPACE is not set
-CONFIG_TICK_CPU_ACCOUNTING=y
-# CONFIG_TOSHIBA is not set
-CONFIG_UID16=y
-CONFIG_UIDGID_CONVERTED=y
-CONFIG_USB_ARCH_HAS_XHCI=y
-CONFIG_USB_SUPPORT=y
-# CONFIG_USER_NS is not set
-CONFIG_USER_STACKTRACE_SUPPORT=y
-# CONFIG_VIA_WDT is not set
-CONFIG_VM86=y
-# CONFIG_VMWARE_VMCI is not set
-CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_W83697UG_WDT is not set
-# CONFIG_WAFER_WDT is not set
-CONFIG_X86=y
-CONFIG_X86_32=y
-# CONFIG_X86_32_IRIS is not set
-CONFIG_X86_32_LAZY_GS=y
-CONFIG_X86_ALIGNMENT_16=y
-# CONFIG_X86_ANCIENT_MCE is not set
-# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
-# CONFIG_X86_CPUFREQ_NFORCE2 is not set
-# CONFIG_X86_CPUID is not set
-# CONFIG_X86_EXTENDED_PLATFORM is not set
-CONFIG_X86_F00F_BUG=y
-CONFIG_X86_GENERIC=y
-# CONFIG_X86_GOLDFISH is not set
-# CONFIG_X86_GX_SUSPMOD is not set
-# CONFIG_X86_INTEL_PSTATE is not set
-CONFIG_X86_INTEL_USERCOPY=y
-CONFIG_X86_INTERNODE_CACHE_SHIFT=6
-CONFIG_X86_INVD_BUG=y
-CONFIG_X86_IO_APIC=y
-CONFIG_X86_L1_CACHE_SHIFT=6
-CONFIG_X86_LOCAL_APIC=y
-# CONFIG_X86_LONGRUN is not set
-CONFIG_X86_MCE=y
-CONFIG_X86_MCE_AMD=y
-# CONFIG_X86_MCE_INJECT is not set
-CONFIG_X86_MCE_INTEL=y
-CONFIG_X86_MCE_THRESHOLD=y
-CONFIG_X86_MINIMUM_CPU_FAMILY=4
-CONFIG_X86_MPPARSE=y
-# CONFIG_X86_MSR is not set
-# CONFIG_X86_P4_CLOCKMOD is not set
-# CONFIG_X86_PAE is not set
-CONFIG_X86_PAT=y
-CONFIG_X86_PLATFORM_DEVICES=y
-# CONFIG_X86_POWERNOW_K6 is not set
-# CONFIG_X86_POWERNOW_K7 is not set
-CONFIG_X86_PPRO_FENCE=y
-# CONFIG_X86_PTDUMP is not set
-# CONFIG_X86_REBOOTFIXUPS is not set
-CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
-CONFIG_X86_RESERVE_LOW=64
-# CONFIG_X86_SMAP is not set
-# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
-# CONFIG_X86_SPEEDSTEP_ICH is not set
-# CONFIG_X86_SPEEDSTEP_LIB is not set
-# CONFIG_X86_SPEEDSTEP_SMI is not set
-CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
-CONFIG_X86_THERMAL_VECTOR=y
-CONFIG_X86_UP_APIC=y
-CONFIG_X86_UP_IOAPIC=y
-CONFIG_X86_VERBOSE_BOOTUP=y
-CONFIG_XZ_DEC_BCJ=y
-CONFIG_XZ_DEC_X86=y
-CONFIG_ZLIB_INFLATE=y
-# CONFIG_ZONE_DMA32 is not set
diff --git a/target/linux/x86/config-3.3 b/target/linux/x86/config-3.3
deleted file mode 100644
index 0798b1c..0000000
--- a/target/linux/x86/config-3.3
+++ /dev/null
@@ -1,381 +0,0 @@
-# CONFIG_60XX_WDT is not set
-# CONFIG_64BIT is not set
-# CONFIG_ACPI is not set
-# CONFIG_ACQUIRE_WDT is not set
-# CONFIG_ADVANTECH_WDT is not set
-# CONFIG_ALIM1535_WDT is not set
-# CONFIG_ALIX is not set
-CONFIG_AMD_NB=y
-CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
-CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig"
-CONFIG_ARCH_DISCARD_MEMBLOCK=y
-CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
-CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
-CONFIG_ARCH_HAS_CPU_RELAX=y
-CONFIG_ARCH_HAS_DEFAULT_IDLE=y
-CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-ecx -fcall-saved-edx"
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-# CONFIG_ARCH_RANDOM is not set
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
-CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
-CONFIG_ARCH_SUPPORTS_MSI=y
-CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_USES_PG_UNCACHED=y
-CONFIG_ARCH_WANT_FRAME_POINTERS=y
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-CONFIG_ATA=y
-CONFIG_ATA_GENERIC=y
-CONFIG_ATA_PIIX=y
-# CONFIG_AUDIT_ARCH is not set
-CONFIG_BINFMT_MISC=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_BOUNCE=y
-CONFIG_CLKBLD_I8253=y
-CONFIG_CLKEVT_I8253=y
-CONFIG_CLKSRC_I8253=y
-CONFIG_CLOCKSOURCE_WATCHDOG=y
-CONFIG_COMPAT_VDSO=y
-# CONFIG_CPU5_WDT is not set
-CONFIG_CPU_FREQ=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
-# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
-CONFIG_CPU_FREQ_STAT=y
-CONFIG_CPU_FREQ_STAT_DETAILS=y
-CONFIG_CPU_FREQ_TABLE=y
-CONFIG_CPU_IDLE=y
-CONFIG_CPU_IDLE_GOV_LADDER=y
-CONFIG_CPU_SUP_AMD=y
-CONFIG_CPU_SUP_CENTAUR=y
-CONFIG_CPU_SUP_CYRIX_32=y
-CONFIG_CPU_SUP_INTEL=y
-CONFIG_CPU_SUP_TRANSMETA_32=y
-CONFIG_CPU_SUP_UMC_32=y
-CONFIG_CRC16=y
-# CONFIG_CRYPTO_SERPENT_SSE2_586 is not set
-# CONFIG_DCDBAS is not set
-# CONFIG_DEBUG_BOOT_PARAMS is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_NMI_SELFTEST is not set
-# CONFIG_DEBUG_VIRTUAL is not set
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_DEFAULT_IO_DELAY_TYPE=0
-# CONFIG_DELL_RBU is not set
-# CONFIG_DMI is not set
-CONFIG_DNOTIFY=y
-CONFIG_DOUBLEFAULT=y
-CONFIG_EARLY_PRINTK=y
-# CONFIG_EARLY_PRINTK_DBGP is not set
-# CONFIG_EDD is not set
-CONFIG_ELF_CORE=y
-# CONFIG_EUROTECH_WDT is not set
-CONFIG_EXT4_FS=y
-# CONFIG_F71808E_WDT is not set
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_FIRMWARE_MEMMAP=y
-CONFIG_FIX_EARLYCON_MEM=y
-CONFIG_FS_MBCACHE=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_FIND_FIRST_BIT=y
-CONFIG_GENERIC_IOMAP=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_GENERIC_PCI_IOMAP=y
-# CONFIG_GENERIC_TIME_VSYSCALL is not set
-# CONFIG_GOOGLE_FIRMWARE is not set
-# CONFIG_HANGCHECK_TIMER is not set
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
-CONFIG_HAVE_AOUT=y
-CONFIG_HAVE_ARCH_JUMP_LABEL=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_ARCH_KMEMCHECK=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_ATOMIC_IOMAP=y
-CONFIG_HAVE_CMPXCHG_DOUBLE=y
-CONFIG_HAVE_CMPXCHG_LOCAL=y
-CONFIG_HAVE_C_RECORDMCOUNT=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_GENERIC_HARDIRQS=y
-CONFIG_HAVE_HW_BREAKPOINT=y
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_IRQ_WORK=y
-CONFIG_HAVE_KERNEL_BZIP2=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_HAVE_KERNEL_XZ=y
-CONFIG_HAVE_KVM=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_HAVE_MEMBLOCK=y
-CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
-CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
-CONFIG_HAVE_MMIOTRACE_SUPPORT=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_OPTPROBES=y
-CONFIG_HAVE_PCSPKR_PLATFORM=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_HAVE_PERF_EVENTS_NMI=y
-CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
-CONFIG_HAVE_SETUP_PER_CPU_AREA=y
-CONFIG_HAVE_SPARSE_IRQ=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_HAVE_TEXT_POKE_SMP=y
-CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
-CONFIG_HAVE_USER_RETURN_NOTIFIER=y
-# CONFIG_HIGHMEM4G is not set
-CONFIG_HPET_EMULATE_RTC=y
-CONFIG_HPET_TIMER=y
-# CONFIG_HP_WATCHDOG is not set
-CONFIG_HT_IRQ=y
-# CONFIG_HUGETLBFS is not set
-CONFIG_HW_RANDOM=y
-CONFIG_HW_RANDOM_GEODE=y
-CONFIG_HW_RANDOM_VIA=y
-# CONFIG_I6300ESB_WDT is not set
-CONFIG_I8253_LOCK=y
-# CONFIG_I8K is not set
-# CONFIG_IB700_WDT is not set
-# CONFIG_IBMASR is not set
-# CONFIG_IBM_RTL is not set
-CONFIG_ILLEGAL_POINTER_VALUE=0
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_INSTRUCTION_DECODER=y
-# CONFIG_IOMMU_HELPER is not set
-# CONFIG_IOMMU_STRESS is not set
-CONFIG_IO_DELAY_0X80=y
-# CONFIG_IO_DELAY_0XED is not set
-# CONFIG_IO_DELAY_NONE is not set
-CONFIG_IO_DELAY_TYPE_0X80=0
-CONFIG_IO_DELAY_TYPE_0XED=1
-CONFIG_IO_DELAY_TYPE_NONE=3
-CONFIG_IO_DELAY_TYPE_UDELAY=2
-# CONFIG_IO_DELAY_UDELAY is not set
-CONFIG_IRQ_FORCED_THREADING=y
-# CONFIG_IRQ_TIME_ACCOUNTING is not set
-CONFIG_IRQ_WORK=y
-# CONFIG_ISA is not set
-CONFIG_ISA_DMA_API=y
-# CONFIG_ISCSI_IBFT_FIND is not set
-# CONFIG_IT8712F_WDT is not set
-# CONFIG_IT87_WDT is not set
-# CONFIG_ITCO_WDT is not set
-CONFIG_JBD2=y
-CONFIG_KALLSYMS=y
-CONFIG_KEXEC=y
-CONFIG_KTIME_SCALAR=y
-# CONFIG_M386 is not set
-CONFIG_M486=y
-# CONFIG_M586 is not set
-# CONFIG_M586MMX is not set
-# CONFIG_M586TSC is not set
-# CONFIG_M686 is not set
-# CONFIG_MACHZ_WDT is not set
-CONFIG_MATH_EMULATION=y
-# CONFIG_MATOM is not set
-# CONFIG_MCA is not set
-# CONFIG_MCORE2 is not set
-# CONFIG_MCRUSOE is not set
-# CONFIG_MCYRIXIII is not set
-# CONFIG_MEFFICEON is not set
-# CONFIG_MELAN is not set
-# CONFIG_MEMTEST is not set
-# CONFIG_MGEODEGX1 is not set
-# CONFIG_MGEODE_LX is not set
-# CONFIG_MICROCODE is not set
-# CONFIG_MK6 is not set
-# CONFIG_MK7 is not set
-# CONFIG_MK8 is not set
-# CONFIG_MPENTIUM4 is not set
-# CONFIG_MPENTIUMII is not set
-# CONFIG_MPENTIUMIII is not set
-# CONFIG_MPENTIUMM is not set
-CONFIG_MTD_BLOCK2MTD=y
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_TS5500 is not set
-CONFIG_MTRR=y
-# CONFIG_MTRR_SANITIZER is not set
-# CONFIG_MVIAC3_2 is not set
-# CONFIG_MVIAC7 is not set
-# CONFIG_MWINCHIP3D is not set
-# CONFIG_MWINCHIPC6 is not set
-CONFIG_NAMESPACES=y
-# CONFIG_NEED_DMA_MAP_STATE is not set
-CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
-CONFIG_NEED_PER_CPU_KM=y
-CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
-CONFIG_NEED_SG_DMA_LENGTH=y
-# CONFIG_NET_NS is not set
-CONFIG_NOHIGHMEM=y
-CONFIG_NO_BOOTMEM=y
-CONFIG_NR_CPUS=1
-# CONFIG_NSC_GPIO is not set
-CONFIG_NVRAM=y
-# CONFIG_OLPC is not set
-CONFIG_OPROFILE_NMI_TIMER=y
-# CONFIG_OPTIMIZE_INLINING is not set
-CONFIG_OUTPUT_FORMAT="elf32-i386"
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PARAVIRT_GUEST is not set
-# CONFIG_PC8736x_GPIO is not set
-# CONFIG_PC87413_WDT is not set
-CONFIG_PCI=y
-# CONFIG_PCIEPORTBUS is not set
-CONFIG_PCI_BIOS=y
-CONFIG_PCI_DIRECT=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_GOANY=y
-# CONFIG_PCI_GOBIOS is not set
-# CONFIG_PCI_GODIRECT is not set
-# CONFIG_PCI_GOMMCONFIG is not set
-CONFIG_PCI_MSI=y
-CONFIG_PCSPKR_PLATFORM=y
-# CONFIG_PDA_POWER is not set
-CONFIG_PERF_EVENTS=y
-CONFIG_PHYSICAL_ALIGN=0x100000
-CONFIG_PHYSICAL_START=0x1000000
-CONFIG_POWER_SUPPLY=y
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_PROCESSOR_SELECT is not set
-CONFIG_PROC_PAGE_MONITOR=y
-# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
-CONFIG_RD_BZIP2=y
-CONFIG_RD_GZIP=y
-# CONFIG_RELOCATABLE is not set
-CONFIG_RTC_CLASS=y
-# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-# CONFIG_SAMSUNG_Q10 is not set
-# CONFIG_SBC7240_WDT is not set
-# CONFIG_SBC8360_WDT is not set
-# CONFIG_SBC_EPX_C3_WATCHDOG is not set
-# CONFIG_SC1200_WDT is not set
-# CONFIG_SC520_WDT is not set
-# CONFIG_SCHED_HRTICK is not set
-CONFIG_SCSI=y
-CONFIG_SCx200=y
-CONFIG_SCx200HR_TIMER=y
-# CONFIG_SCx200_GPIO is not set
-# CONFIG_SCx200_WDT is not set
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_CT82C710 is not set
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_LIBPS2=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SMSC37B787_WDT is not set
-# CONFIG_SMSC_SCH311X_WDT is not set
-CONFIG_SPARSEMEM_STATIC=y
-CONFIG_SPARSE_IRQ=y
-CONFIG_STRICT_DEVMEM=y
-# CONFIG_TELCLOCK is not set
-CONFIG_THERMAL=y
-# CONFIG_TOSHIBA is not set
-# CONFIG_TRANSPARENT_HUGEPAGE is not set
-CONFIG_UID16=y
-CONFIG_USB_ARCH_HAS_XHCI=y
-CONFIG_USB_SUPPORT=y
-# CONFIG_USER_NS is not set
-CONFIG_USER_STACKTRACE_SUPPORT=y
-# CONFIG_VIA_WDT is not set
-CONFIG_VM86=y
-# CONFIG_VMWARE_BALLOON is not set
-CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_W83697UG_WDT is not set
-# CONFIG_WAFER_WDT is not set
-CONFIG_X86=y
-CONFIG_X86_32=y
-# CONFIG_X86_32_IRIS is not set
-CONFIG_X86_32_LAZY_GS=y
-# CONFIG_X86_64 is not set
-CONFIG_X86_ALIGNMENT_16=y
-# CONFIG_X86_ANCIENT_MCE is not set
-CONFIG_X86_BSWAP=y
-# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
-CONFIG_X86_CMPXCHG=y
-# CONFIG_X86_CPUFREQ_NFORCE2 is not set
-# CONFIG_X86_CPUID is not set
-# CONFIG_X86_EXTENDED_PLATFORM is not set
-# CONFIG_X86_E_POWERSAVER is not set
-CONFIG_X86_F00F_BUG=y
-CONFIG_X86_GENERIC=y
-# CONFIG_X86_GX_SUSPMOD is not set
-CONFIG_X86_INTEL_USERCOPY=y
-CONFIG_X86_INTERNODE_CACHE_SHIFT=6
-CONFIG_X86_INVD_BUG=y
-CONFIG_X86_INVLPG=y
-CONFIG_X86_IO_APIC=y
-CONFIG_X86_L1_CACHE_SHIFT=6
-CONFIG_X86_LOCAL_APIC=y
-# CONFIG_X86_LONGRUN is not set
-CONFIG_X86_MCE=y
-CONFIG_X86_MCE_AMD=y
-# CONFIG_X86_MCE_INJECT is not set
-CONFIG_X86_MCE_INTEL=y
-CONFIG_X86_MCE_THRESHOLD=y
-CONFIG_X86_MINIMUM_CPU_FAMILY=4
-CONFIG_X86_MPPARSE=y
-# CONFIG_X86_MSR is not set
-# CONFIG_X86_P4_CLOCKMOD is not set
-# CONFIG_X86_PAE is not set
-CONFIG_X86_PAT=y
-CONFIG_X86_PLATFORM_DEVICES=y
-CONFIG_X86_POPAD_OK=y
-# CONFIG_X86_POWERNOW_K6 is not set
-# CONFIG_X86_POWERNOW_K7 is not set
-CONFIG_X86_PPRO_FENCE=y
-# CONFIG_X86_PTDUMP is not set
-# CONFIG_X86_REBOOTFIXUPS is not set
-CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
-CONFIG_X86_RESERVE_LOW=64
-# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
-# CONFIG_X86_SPEEDSTEP_ICH is not set
-# CONFIG_X86_SPEEDSTEP_LIB is not set
-# CONFIG_X86_SPEEDSTEP_SMI is not set
-CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
-CONFIG_X86_THERMAL_VECTOR=y
-CONFIG_X86_UP_APIC=y
-CONFIG_X86_UP_IOAPIC=y
-CONFIG_X86_VERBOSE_BOOTUP=y
-CONFIG_X86_WP_WORKS_OK=y
-CONFIG_X86_XADD=y
-CONFIG_XZ_DEC_BCJ=y
-CONFIG_XZ_DEC_X86=y
-# CONFIG_ZONE_DMA32 is not set
diff --git a/target/linux/x86/ep80579/config-3.3 b/target/linux/x86/ep80579/config-3.3
deleted file mode 100644
index 78ee0ce..0000000
--- a/target/linux/x86/ep80579/config-3.3
+++ /dev/null
@@ -1,11 +0,0 @@
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_HIGHMEM=y
-CONFIG_HIGHMEM4G=y
-# CONFIG_HIGHPTE is not set
-# CONFIG_ITCO_VENDOR_SUPPORT is not set
-CONFIG_ITCO_WDT=y
-CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_MTD is not set
-# CONFIG_NOHIGHMEM is not set
-CONFIG_SATA_AHCI=y
-# CONFIG_SQUASHFS is not set
diff --git a/target/linux/x86/ep80579/target.mk b/target/linux/x86/ep80579/target.mk
deleted file mode 100644
index 4fe35e0..0000000
--- a/target/linux/x86/ep80579/target.mk
+++ /dev/null
@@ -1,10 +0,0 @@
-BOARDNAME:=Intel EP80579
-LINUX_VERSION:=3.3.8
-DEFAULT_PACKAGES += kmod-ep80579-can kmod-ep80579-eth kmod-ep80579-misc \
-			kmod-usb-core kmod-usb2 kmod-usb-hid kmod-usb-uhci
-
-define Target/Description
-	Build firmware images for Intel EP80579 based boards
-	(e.g : ADI Engineering Ocracoke Island)
-endef
-
diff --git a/target/linux/x86/generic/config-3.10 b/target/linux/x86/generic/config-3.10
deleted file mode 100644
index 2babaab..0000000
--- a/target/linux/x86/generic/config-3.10
+++ /dev/null
@@ -1,203 +0,0 @@
-# CONFIG_3C515 is not set
-# CONFIG_AC3200 is not set
-CONFIG_ACPI=y
-CONFIG_ACPI_AC=y
-CONFIG_ACPI_BATTERY=y
-CONFIG_ACPI_BLACKLIST_YEAR=0
-CONFIG_ACPI_BUTTON=y
-# CONFIG_ACPI_CMPC is not set
-# CONFIG_ACPI_CONTAINER is not set
-# CONFIG_ACPI_CUSTOM_DSDT is not set
-# CONFIG_ACPI_DEBUG is not set
-# CONFIG_ACPI_DOCK is not set
-# CONFIG_ACPI_EC_DEBUGFS is not set
-# CONFIG_ACPI_FAN is not set
-CONFIG_ACPI_I2C=y
-# CONFIG_ACPI_INITRD_TABLE_OVERRIDE is not set
-# CONFIG_ACPI_PCI_SLOT is not set
-CONFIG_ACPI_PROCESSOR=y
-# CONFIG_ACPI_PROCESSOR_AGGREGATOR is not set
-# CONFIG_ACPI_PROCFS is not set
-# CONFIG_ACPI_PROCFS_POWER is not set
-# CONFIG_ACPI_PROC_EVENT is not set
-# CONFIG_ACPI_SBS is not set
-CONFIG_ACPI_THERMAL=y
-CONFIG_ACPI_VIDEO=y
-# CONFIG_ACPI_WMI is not set
-CONFIG_AGP=y
-# CONFIG_AGP_ALI is not set
-# CONFIG_AGP_AMD is not set
-# CONFIG_AGP_AMD64 is not set
-# CONFIG_AGP_ATI is not set
-# CONFIG_AGP_EFFICEON is not set
-CONFIG_AGP_INTEL=y
-# CONFIG_AGP_NVIDIA is not set
-# CONFIG_AGP_SIS is not set
-# CONFIG_AGP_SWORKS is not set
-# CONFIG_AGP_VIA is not set
-# CONFIG_APPLE_GMUX is not set
-# CONFIG_APRICOT is not set
-# CONFIG_ASUS_LAPTOP is not set
-# CONFIG_AT1700 is not set
-# CONFIG_BACKLIGHT_ADP8860 is not set
-# CONFIG_BACKLIGHT_ADP8870 is not set
-# CONFIG_BACKLIGHT_APPLE is not set
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_GENERIC=y
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-# CONFIG_BACKLIGHT_SAHARA is not set
-CONFIG_BLK_DEV_SR=y
-# CONFIG_BLK_DEV_SR_VENDOR is not set
-# CONFIG_BLK_DEV_XD is not set
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_CPU_IDLE_GOV_MENU=y
-# CONFIG_DEPCA is not set
-CONFIG_DMA_SHARED_BUFFER=y
-CONFIG_DMI=y
-# CONFIG_DMIID is not set
-# CONFIG_DMI_SYSFS is not set
-CONFIG_DRM=y
-# CONFIG_DRM_AST is not set
-# CONFIG_DRM_CIRRUS_QEMU is not set
-# CONFIG_DRM_GMA500 is not set
-# CONFIG_DRM_I2C_CH7006 is not set
-# CONFIG_DRM_I2C_NXP_TDA998X is not set
-# CONFIG_DRM_I2C_SIL164 is not set
-# CONFIG_DRM_I810 is not set
-CONFIG_DRM_I915=y
-CONFIG_DRM_I915_KMS=y
-CONFIG_DRM_KMS_HELPER=y
-# CONFIG_DRM_LOAD_EDID_FIRMWARE is not set
-# CONFIG_DRM_MGA is not set
-# CONFIG_DRM_MGAG200 is not set
-# CONFIG_DRM_NOUVEAU is not set
-# CONFIG_DRM_QXL is not set
-# CONFIG_DRM_R128 is not set
-# CONFIG_DRM_RADEON is not set
-# CONFIG_DRM_SAVAGE is not set
-# CONFIG_DRM_SIS is not set
-# CONFIG_DRM_TDFX is not set
-# CONFIG_DRM_UDL is not set
-# CONFIG_DRM_VIA is not set
-# CONFIG_DRM_VMWGFX is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_EFI is not set
-# CONFIG_EISA is not set
-# CONFIG_EL1 is not set
-# CONFIG_EL16 is not set
-# CONFIG_EL2 is not set
-# CONFIG_EL3 is not set
-# CONFIG_ELPLUS is not set
-CONFIG_FB=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_I810 is not set
-# CONFIG_FB_VESA is not set
-# CONFIG_FB_WMT_GE_ROPS is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x16=y
-CONFIG_FONT_8x8=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FUJITSU_LAPTOP is not set
-# CONFIG_GEOS is not set
-CONFIG_HID=y
-CONFIG_HID_BATTERY_STRENGTH=y
-CONFIG_HPET=y
-CONFIG_HPET_MMAP=y
-# CONFIG_HP_ACCEL is not set
-CONFIG_HW_CONSOLE=y
-CONFIG_I2C=y
-CONFIG_I2C_ALGOBIT=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_INPUT=y
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_INPUT_MOUSE=y
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-CONFIG_INTEL_IDLE=y
-# CONFIG_INTEL_IPS is not set
-# CONFIG_INTEL_MENLOW is not set
-CONFIG_ISA=y
-CONFIG_ISAPNP=y
-CONFIG_ISO9660_FS=y
-# CONFIG_JOLIET is not set
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_LANCE is not set
-# CONFIG_LCD_CLASS_DEVICE is not set
-# CONFIG_LEDS_CLEVO_MAIL is not set
-# CONFIG_MDA_CONSOLE is not set
-# CONFIG_MIXCOMWD is not set
-# CONFIG_MOUSE_BCM5974 is not set
-# CONFIG_MOUSE_CYAPA is not set
-CONFIG_MOUSE_PS2=y
-CONFIG_MOUSE_PS2_ALPS=y
-# CONFIG_MOUSE_PS2_CYPRESS is not set
-# CONFIG_MOUSE_PS2_ELANTECH is not set
-CONFIG_MOUSE_PS2_LIFEBOOK=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_NET_VENDOR_RACAL is not set
-CONFIG_NLS=y
-CONFIG_NO_HZ=y
-# CONFIG_PANASONIC_LAPTOP is not set
-CONFIG_PATA_AMD=y
-CONFIG_PATA_LEGACY=y
-CONFIG_PATA_MPIIX=y
-CONFIG_PATA_OLDPIIX=y
-CONFIG_PATA_PLATFORM=y
-CONFIG_PATA_SC1200=y
-CONFIG_PATA_VIA=y
-CONFIG_PCIEAER=y
-CONFIG_PCIEPORTBUS=y
-CONFIG_PCI_IOAPIC=y
-CONFIG_PCI_LABEL=y
-CONFIG_PCI_MMCONFIG=y
-# CONFIG_PCWATCHDOG is not set
-CONFIG_PNP=y
-CONFIG_PNPACPI=y
-# CONFIG_PNPBIOS is not set
-CONFIG_PNP_DEBUG_MESSAGES=y
-# CONFIG_PVPANIC is not set
-CONFIG_SATA_AHCI=y
-CONFIG_SCHED_HRTICK=y
-# CONFIG_SCx200_ACB is not set
-CONFIG_SERIAL_8250_PNP=y
-# CONFIG_THINKPAD_ACPI is not set
-# CONFIG_TOPSTAR_LAPTOP is not set
-# CONFIG_TOSHIBA_BT_RFKILL is not set
-CONFIG_USB=y
-CONFIG_USB_COMMON=y
-CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_HCD_PLATFORM is not set
-CONFIG_USB_EHCI_PCI=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_HCD_PLATFORM is not set
-CONFIG_USB_STORAGE=y
-CONFIG_USB_UHCI_HCD=y
-CONFIG_VGACON_SOFT_SCROLLBACK=y
-CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
-CONFIG_VGA_CONSOLE=y
-CONFIG_VIDEO_OUTPUT_CONTROL=y
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_WDT is not set
-# CONFIG_X86_ACPI_CPUFREQ is not set
-# CONFIG_X86_E_POWERSAVER is not set
-# CONFIG_X86_INTEL_LPSS is not set
-# CONFIG_X86_LONGHAUL is not set
-# CONFIG_X86_PCC_CPUFREQ is not set
-CONFIG_X86_PM_TIMER=y
-# CONFIG_XO15_EBOOK is not set
-# CONFIG_ZISOFS is not set
diff --git a/target/linux/x86/generic/profiles/000-Generic.mk b/target/linux/x86/generic/profiles/000-Generic.mk
deleted file mode 100644
index 90f989a..0000000
--- a/target/linux/x86/generic/profiles/000-Generic.mk
+++ /dev/null
@@ -1,18 +0,0 @@
-#
-# Copyright (C) 2006-2009 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-define Profile/Generic
-  NAME:=Generic
-  PACKAGES:=kmod-3c59x kmod-e100 kmod-e1000 kmod-natsemi kmod-ne2k-pci \
-	kmod-pcnet32 kmod-8139too kmod-r8169 kmod-sis900 kmod-tg3 \
-	kmod-via-rhine kmod-via-velocity
-endef
-
-define Profile/Generic/Description
-	Generic Profile
-endef
-$(eval $(call Profile,Generic))
diff --git a/target/linux/x86/generic/profiles/Soekris45xx.mk b/target/linux/x86/generic/profiles/Soekris45xx.mk
deleted file mode 100644
index d1d88c6..0000000
--- a/target/linux/x86/generic/profiles/Soekris45xx.mk
+++ /dev/null
@@ -1,16 +0,0 @@
-#
-# Copyright (C) 2008 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-define Profile/Soekris45xx
-  NAME:=Soekris Net45xx
-  PACKAGES:=kmod-natsemi kmod-leds-net48xx kmod-wdt-sc520
-endef
-
-define Profile/Soekris45xx/Description
-        Package set compatible with the Soekris Net45xx. Net4511 and 4521 need PCMCIA Cardbus support. Please add manually.
-endef
-$(eval $(call Profile,Soekris45xx))
diff --git a/target/linux/x86/generic/profiles/Soekris48xx.mk b/target/linux/x86/generic/profiles/Soekris48xx.mk
deleted file mode 100644
index 66bafbf..0000000
--- a/target/linux/x86/generic/profiles/Soekris48xx.mk
+++ /dev/null
@@ -1,16 +0,0 @@
-#
-# Copyright (C) 2008 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-define Profile/Soekris48xx
-  NAME:=Soekris Net48xx
-  PACKAGES:=kmod-i2c-scx200 kmod-natsemi kmod-leds-net48xx kmod-gpio-scx200 kmod-wdt-scx200 kmod-hwmon-pc87360
-endef
-
-define Profile/Soekris48xx/Description
-        Package set compatible with the Soekris Net4801. Contains I2C/LEDS/GPIO/Sensors support
-endef
-$(eval $(call Profile,Soekris48xx))
diff --git a/target/linux/x86/generic/profiles/Wrap.mk b/target/linux/x86/generic/profiles/Wrap.mk
deleted file mode 100644
index 62532ac..0000000
--- a/target/linux/x86/generic/profiles/Wrap.mk
+++ /dev/null
@@ -1,16 +0,0 @@
-#
-# Copyright (C) 2006,2009 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-define Profile/Wrap
-  NAME:=PCEngines WRAP
-  PACKAGES:=kmod-i2c-scx200 kmod-natsemi kmod-leds-wrap kmod-gpio-scx200 kmod-wdt-scx200 kmod-hwmon-pc87360
-endef
-
-define Profile/Wrap/Description
-	Package set compatible with the PCEngines WRAP. Contains I2C/LEDS/GPIO/Sensors support
-endef
-$(eval $(call Profile,Wrap))
diff --git a/target/linux/x86/generic/target.mk b/target/linux/x86/generic/target.mk
deleted file mode 100644
index 7191292..0000000
--- a/target/linux/x86/generic/target.mk
+++ /dev/null
@@ -1,7 +0,0 @@
-BOARDNAME:=Generic
-
-define Target/Description
-	Build firmware images for x86 based boards
-	(e.g : Soekris, ...)
-endef
-
diff --git a/target/linux/x86/geos/base-files/etc/config/network b/target/linux/x86/geos/base-files/etc/config/network
deleted file mode 100644
index a60fcdf..0000000
--- a/target/linux/x86/geos/base-files/etc/config/network
+++ /dev/null
@@ -1,53 +0,0 @@
-# Copyright (C) 2011 OpenWrt.org
-
-config interface loopback
-	option ifname	lo
-	option proto	static
-	option ipaddr	127.0.0.1
-	option netmask	255.0.0.0
-
-config interface lan
-	option ifname	"eth0 eth1"
-	option type 	bridge
-	option proto	static
-	option ipaddr	192.168.1.1
-	option netmask	255.255.255.0
-	option ip6assign 60
-
-config atm-bridge
-	option unit	0
-	option atmdev	0
-	option vpi	0
-	option vci	35
-	option encaps	llc
-	option payload	bridged
-	option sendsize	2040
-
-config interface wan
-	option proto	dhcp
-	option ifname	nas0
-	# clone your eth0 address here
-	# option macaddr '00:0A:FA:22:00:80'
-
-config interface wan6
-	option ifname   @wan
-	option proto    dhcpv6
-
-config globals globals
-	option ula_prefix auto
-
-
-# 2nd interface on Geos2
-#config interface wan
-#	option proto	pppoa
-#	option atmdev	1
-#	option vpi	8
-#	option vci	32
-#	option encaps	vc
-#	option username	'username@myisp.net'
-#	option password 'password'
-#	option keepalive	3
-#	option defaultroute	1
-#	option peerdns	1
-#	option pppd_options	'kdebug 1 debug noccp'
-
diff --git a/target/linux/x86/geos/base-files/etc/config/system b/target/linux/x86/geos/base-files/etc/config/system
deleted file mode 100644
index 988c849..0000000
--- a/target/linux/x86/geos/base-files/etc/config/system
+++ /dev/null
@@ -1,30 +0,0 @@
-
-config system
-	option hostname	OpenWrt
-	option timezone	UTC
-
-config timeserver ntp
-	list server	0.openwrt.pool.ntp.org
-	list server	1.openwrt.pool.ntp.org
-	list server	2.openwrt.pool.ntp.org
-	list server	3.openwrt.pool.ntp.org
-
-config led
-	option default	0
-	option name	LAN
-	option sysfs	'geos:1'
-	option trigger	netdev
-	option mode	'tx rx'
-	option dev	'br-lan'
-
-config led
-	option default	0
-	option name	WiFi
-	option sysfs	'geos:2'
-	option trigger	'phy0tpt'
-
-config led
-	option default	0
-	option name	Health
-	option sysfs	'geos:3'
-	option trigger	'heartbeat'
diff --git a/target/linux/x86/geos/base-files/etc/hotplug.d/button/50-reboot b/target/linux/x86/geos/base-files/etc/hotplug.d/button/50-reboot
deleted file mode 100644
index bf893c1..0000000
--- a/target/linux/x86/geos/base-files/etc/hotplug.d/button/50-reboot
+++ /dev/null
@@ -1,13 +0,0 @@
-#!/bin/sh
-
-logger -t button -p daemon.info "$BUTTON/$ACTION"
-
-case "$BUTTON/$ACTION" in
-
-reset/released)
-  reboot -f
-  ;;
-
-esac
-
-exit 0
diff --git a/target/linux/x86/geos/config-3.10 b/target/linux/x86/geos/config-3.10
deleted file mode 100644
index 66ae2c7..0000000
--- a/target/linux/x86/geos/config-3.10
+++ /dev/null
@@ -1,24 +0,0 @@
-# CONFIG_ATA_PIIX is not set
-CONFIG_DMI=y
-CONFIG_DMIID=y
-# CONFIG_DMI_SYSFS is not set
-CONFIG_GEOS=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIO_SYSFS=y
-# CONFIG_HIGHMEM64G is not set
-CONFIG_HWMON=y
-# CONFIG_ISDN is not set
-# CONFIG_LEDS_CLEVO_MAIL is not set
-# CONFIG_M486 is not set
-# CONFIG_MATH_EMULATION is not set
-CONFIG_MGEODE_LX=y
-CONFIG_NLS=y
-CONFIG_PATA_CS5536=y
-CONFIG_PCI_LABEL=y
-# CONFIG_SCx200 is not set
-CONFIG_THERMAL_HWMON=y
-CONFIG_X86_CMOV=y
-CONFIG_X86_DEBUGCTLMSR=y
-CONFIG_X86_TSC=y
-CONFIG_X86_USE_3DNOW=y
-CONFIG_X86_USE_PPRO_CHECKSUM=y
diff --git a/target/linux/x86/geos/target.mk b/target/linux/x86/geos/target.mk
deleted file mode 100644
index d036ef6..0000000
--- a/target/linux/x86/geos/target.mk
+++ /dev/null
@@ -1,34 +0,0 @@
-BOARDNAME:=Traverse Geos
-FEATURES:=squashfs ext4 pci usb gpio broken
-DEFAULT_PACKAGES += \
-            kmod-crypto-hw-geode kmod-crypto-ocf \
-            kmod-gpio-cs5535-new kmod-gpio-nsc \
-            kmod-wdt-geode kmod-cs5535-clockevt kmod-cs5535-mfgpt \
-            kmod-cs5536 \
-            kmod-hwmon-core kmod-hwmon-lm90 \
-            kmod-8139cp kmod-solos-pci kmod-sched \
-            kmod-i2c-core kmod-i2c-gpio \
-            kmod-i2c-algo-bit kmod-i2c-algo-pca kmod-i2c-algo-pcf \
-            kmod-i2c-scx200-acb \
-            kmod-usb-core kmod-usb2 kmod-usb-ohci \
-            kmod-cfg80211 kmod-mac80211 \
-            kmod-mppe kmod-pppoa kmod-pppol2tp \
-            kmod-ath5k kmod-ath9k \
-            kmod-leds-gpio kmod-input-gpio-keys-polled \
-            kmod-button-hotplug \
-            kmod-ledtrig-heartbeat kmod-ledtrig-gpio \
-            kmod-ledtrig-netdev \
-            kmod-cpu-msr \
-            soloscli linux-atm br2684ctl ppp-mod-pppoa pppdump pppstats \
-            hwclock wpad flashrom tc
-CS5535_MASK:=0x0E000048
-
-CPU_TYPE := geode
-
-define Target/Description
-    Build firmware images for Traverse Geos board
-endef
-
-define KernelPackage/gpio-cs5535-new/install
-     sed -i -r -e 's/$$$$$$$$/ mask=$(CS5535_MASK)/' $(1)/etc/modules.d/??-gpio-cs5535-new
-endef
diff --git a/target/linux/x86/image/Config.in b/target/linux/x86/image/Config.in
deleted file mode 100644
index d2ef9fb..0000000
--- a/target/linux/x86/image/Config.in
+++ /dev/null
@@ -1,20 +0,0 @@
-config X86_ETHERBOOT_IMAGES
-	bool "Build Etherboot image"
-	depends on TARGET_x86_thincan_DBE61
-	default y
-	help
-	  Builds network bootable image for ThinCan DBE61 (Etherboot BIOS)
-
-config X86_ETHERBOOT_BOOTOPTS
-	string "Extra kernel boot options"
-	depends on X86_ETHERBOOT_IMAGES
-	default "ip=dhcp nbdport=2000 " if TARGET_ROOTFS_SQUASHFS
-	default "ip=dhcp root=/dev/nfs nfsroot=192.168.0.1:/srv/dbe61"
-	help
-	  Kernel arguments to pass to the kernel eg. NFS root location etc.
-
-config OLPC_BOOTSCRIPT_IMAGES
-	bool "Build images with bootscript"
-	depends on TARGET_x86_olpc
-	depends on TARGET_ROOTFS_EXT4FS || TARGET_ROOTFS_ISO || TARGET_ROOTFS_JFFS2 || TARGET_ROOTFS_SQUASHFS
-	default TARGET_x86_olpc
diff --git a/target/linux/x86/image/Makefile b/target/linux/x86/image/Makefile
deleted file mode 100644
index 5983718..0000000
--- a/target/linux/x86/image/Makefile
+++ /dev/null
@@ -1,267 +0,0 @@
-# 
-# Copyright (C) 2006-2012 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-include $(TOPDIR)/rules.mk
-include $(INCLUDE_DIR)/image.mk
-
-export PATH=$(TARGET_PATH):/sbin
-
-GRUB2_MODULES = biosdisk boot chain configfile ext2 linux ls part_msdos reboot serial vga
-GRUB2_MODULES_ISO = biosdisk boot chain configfile iso9660 linux ls part_msdos reboot serial vga
-GRUB_TERMINALS =
-GRUB_SERIAL_CONFIG =
-GRUB_TERMINAL_CONFIG =
-GRUB_CONSOLE_CMDLINE =
-
-USE_ATKBD = generic kvm_guest
-
-ifneq ($(strip $(foreach subtarget,$(USE_ATKBD),$(CONFIG_TARGET_x86_$(subtarget)))),)
-  GRUB2_MODULES += at_keyboard
-  GRUB2_MODULES_ISO += at_keyboard
-endif
-
-ifneq ($(CONFIG_GRUB_CONSOLE),)
-  GRUB_CONSOLE_CMDLINE += console=tty0
-  GRUB_TERMINALS += console
-endif
-
-GRUB_SERIAL:=$(call qstrip,$(CONFIG_GRUB_SERIAL))
-
-ifneq ($(GRUB_SERIAL),)
-  GRUB_CONSOLE_CMDLINE += console=$(GRUB_SERIAL),$(CONFIG_GRUB_BAUDRATE)n8
-  GRUB_SERIAL_CONFIG := serial --unit=0 --speed=$(CONFIG_GRUB_BAUDRATE) --word=8 --parity=no --stop=1
-  GRUB_TERMINALS += serial
-endif
-
-ifneq ($(GRUB_TERMINALS),)
-  GRUB_TERMINAL_CONFIG := terminal_input $(GRUB_TERMINALS); terminal_output $(GRUB_TERMINALS)
-endif
-
-ROOTPART:=$(call qstrip,$(CONFIG_TARGET_ROOTFS_PARTNAME))
-
-GRUB_TIMEOUT:=$(call qstrip,$(CONFIG_GRUB_TIMEOUT))
-
-ifneq ($(CONFIG_GRUB_IMAGES),)
-
-  BOOTOPTS:=$(call qstrip,$(CONFIG_GRUB_BOOTOPTS))
-
-  define Image/cmdline/ext4
-    root=$(ROOTPART) rootfstype=ext4 rootwait
-  endef
-
-  define Image/cmdline/jffs2-64k
-    block2mtd.block2mtd=$(ROOTPART),65536,rootfs,5 root=/dev/mtdblock0 rootfstype=jffs2 rootwait
-  endef
-
-  define Image/cmdline/jffs2-128k
-    block2mtd.block2mtd=$(ROOTPART),131072,rootfs,5 root=/dev/mtdblock0 rootfstype=jffs2 rootwait
-  endef
-
-  define Image/cmdline/squashfs
-    block2mtd.block2mtd=$(ROOTPART),65536,rootfs,5 root=/dev/mtdblock0 rootfstype=squashfs rootwait
-  endef
-
-  define Image/Build/grub2
-	# left here because the image builder doesnt need these
-	$(INSTALL_DIR) $(KDIR)/root.grub/boot/grub $(KDIR)/grub2
-	$(CP) $(KDIR)/bzImage $(KDIR)/root.grub/boot/vmlinuz
-	grub-mkimage \
-		-d $(STAGING_DIR_HOST)/lib/grub/i386-pc \
-		-o $(KDIR)/grub2/core.img \
-		-O i386-pc \
-		-c ./grub-early.cfg \
-		$(GRUB2_MODULES)
-	$(CP) $(STAGING_DIR_HOST)/lib/grub/i386-pc/*.img $(KDIR)/grub2/
-	echo '(hd0) $(BIN_DIR)/$(IMG_PREFIX)-combined-$(1).img' > $(KDIR)/grub2/device.map
-	sed \
-		-e 's#@SERIAL_CONFIG@#$(strip $(GRUB_SERIAL_CONFIG))#g' \
-		-e 's#@TERMINAL_CONFIG@#$(strip $(GRUB_TERMINAL_CONFIG))#g' \
-		-e 's#@CMDLINE@#$(strip $(call Image/cmdline/$(1)) $(BOOTOPTS) $(GRUB_CONSOLE_CMDLINE))#g' \
-		-e 's#@TIMEOUT@#$(GRUB_TIMEOUT)#g' \
-		./grub.cfg > $(KDIR)/root.grub/boot/grub/grub.cfg
-	PADDING="$(CONFIG_TARGET_IMAGES_PAD)" PATH="$(TARGET_PATH)" ./gen_image_generic.sh \
-		$(BIN_DIR)/$(IMG_PREFIX)-combined-$(1).img \
-		$(CONFIG_TARGET_KERNEL_PARTSIZE) $(KDIR)/root.grub \
-		$(CONFIG_TARGET_ROOTFS_PARTSIZE) $(KDIR)/root.$(1) \
-		256
-	grub-bios-setup \
-		--device-map="$(KDIR)/grub2/device.map" \
-		-d "$(KDIR)/grub2" \
-		-r "hd0,msdos1" \
-		"$(BIN_DIR)/$(IMG_PREFIX)-combined-$(1).img"
-	$(call Image/Build/grub/$(1))
-  endef
-endif
-
-ROOTDELAY=10
-
-ifneq ($(CONFIG_OLPC_BOOTSCRIPT_IMAGES),)
-
-  define Image/cmdline/ext4
-    root=$(ROOTPART) rootfstype=ext4 rootwait
-  endef
-
-  define Image/cmdline/jffs2-64k
-    block2mtd.block2mtd=$(ROOTPART),65536,rootfs root=/dev/mtdblock0 rootfstype=jffs2 rootdelay=$(ROOTDELAY)
-  endef
-
-  define Image/cmdline/jffs2-128k
-    block2mtd.block2mtd=$(ROOTPART),131072,rootfs root=/dev/mtdblock0 rootfstype=jffs2 rootdelay=$(ROOTDELAY)
-  endef
-
-  define Image/cmdline/squashfs
-    block2mtd.block2mtd=$(ROOTPART),65536,rootfs root=/dev/mtdblock0 rootfstype=squashfs rootdelay=$(ROOTDELAY)
-  endef
-
-  define Image/Build/bootscript
-	# left here because the image builder doesnt need these
-	$(INSTALL_DIR) $(KDIR)/root.bootscript/boot
-	$(CP) $(KDIR)/bzImage $(KDIR)/root.bootscript/boot/vmlinuz
-	sed -e 's#@CMDLINE@#$(strip $(call Image/cmdline/$(1))) $(BOOTOPTS)#g' \
-		./olpc.fth > $(KDIR)/root.bootscript/boot/olpc.fth
-	PADDING="$(CONFIG_TARGET_IMAGES_PAD)" PATH="$(TARGET_PATH)" ./gen_image_olpc.sh \
-		$(BIN_DIR)/$(IMG_PREFIX)-combined-$(1).img \
-		$(CONFIG_TARGET_KERNEL_PARTSIZE) $(KDIR)/root.bootscript \
-		$(CONFIG_TARGET_ROOTFS_PARTSIZE) $(KDIR)/root.$(1)
-  endef
-
-endif
-
-define Image/Build/squashfs
-	$(call prepare_generic_squashfs,$(KDIR)/root.squashfs)
-endef
-
-define Image/Build/iso
-	$(INSTALL_DIR) $(KDIR)/root.grub/boot/grub $(KDIR)/grub2
-	$(CP) $(KDIR)/bzImage $(KDIR)/root.grub/boot/vmlinuz
-	grub-mkimage \
-		-d $(STAGING_DIR_HOST)/lib/grub/i386-pc \
-		-o $(KDIR)/grub2/eltorito.img \
-		-O i386-pc \
-		-c ./grub-early.cfg \
-		$(GRUB2_MODULES_ISO)
-	cat \
-		$(STAGING_DIR_HOST)/lib/grub/i386-pc/cdboot.img \
-		$(KDIR)/grub2/eltorito.img \
-		> $(KDIR)/root.grub/boot/grub/eltorito.img
-	sed \
-		-e 's#@SERIAL_CONFIG@#$(strip $(GRUB_SERIAL_CONFIG))#g' \
-		-e 's#@TERMINAL_CONFIG@#$(strip $(GRUB_TERMINAL_CONFIG))#g' \
-		-e 's#@CMDLINE@#root=/dev/sr0 rootfstype=iso9660 rootwait $(strip $(call Image/cmdline/$(1)) $(BOOTOPTS) $(GRUB_CONSOLE_CMDLINE))#g' \
-		-e 's#@TIMEOUT@#$(GRUB_TIMEOUT)#g' \
-		./grub-iso.cfg > $(KDIR)/root.grub/boot/grub/grub.cfg
-	$(CP) $(KDIR)/bzImage $(KDIR)/root.grub/boot/vmlinuz
-	mkisofs -R -b boot/grub/eltorito.img -no-emul-boot -boot-info-table \
-		-o $(KDIR)/root.iso $(KDIR)/root.grub $(TARGET_DIR)
-endef
-
-ifneq ($(CONFIG_VDI_IMAGES),)
-  define Image/Build/vdi
-	rm $(BIN_DIR)/$(IMG_PREFIX)-combined-$(1).vdi || true
-	qemu-img convert -f raw -O vdi \
-		$(BIN_DIR)/$(IMG_PREFIX)-combined-$(1).img \
-		$(BIN_DIR)/$(IMG_PREFIX)-combined-$(1).vdi
-	# XXX: VBoxManage insists on setting perms to 0600
-	chmod 0644 $(BIN_DIR)/$(IMG_PREFIX)-combined-$(1).vdi
-  endef
-endif
-
-ifneq ($(CONFIG_VMDK_IMAGES),)
-  define Image/Build/vmdk
-	rm $(BIN_DIR)/$(IMG_PREFIX)-combined-$(1).vmdk || true
-	qemu-img convert -f raw -O vmdk \
-		$(BIN_DIR)/$(IMG_PREFIX)-combined-$(1).img \
-		$(BIN_DIR)/$(IMG_PREFIX)-combined-$(1).vmdk
-  endef
-endif
-
-define Image/Build/gzip
-	gzip -f9 $(BIN_DIR)/$(IMG_PREFIX)-combined-$(1).img
-	gzip -f9 $(BIN_DIR)/$(IMG_PREFIX)-rootfs-$(1).img
-endef
-
-ifneq ($(CONFIG_TARGET_IMAGES_GZIP),)
-  define Image/Build/gzip/ext4
-	$(call Image/Build/gzip,ext4)
-  endef
-  ifneq ($(CONFIG_TARGET_IMAGES_PAD),)
-    define Image/Build/gzip/squashfs
-	$(call Image/Build/gzip,squashfs)
-    endef
-    define Image/Build/gzip/jffs2-64k
-	$(call Image/Build/gzip,jffs2-64k)
-    endef
-    define Image/Build/gzip/jffs2-128k
-	$(call Image/Build/gzip,jffs2-128k)
-    endef
-  endif
-endif
-
-define Image/BuildKernel
-	$(CP) $(KDIR)/bzImage $(BIN_DIR)/$(IMG_PREFIX)-vmlinuz
-  ifneq ($(CONFIG_X86_ETHERBOOT_IMAGES),)
-	rm -f $(BIN_DIR)/$(IMG_PREFIX)-etherboot
-	$(STAGING_DIR_HOST)/bin/mkelfImage \
-		--append=$(CONFIG_X86_ETHERBOOT_BOOTOPTS) \
-		$(KDIR)/bzImage \
-		$(BIN_DIR)/$(IMG_PREFIX)-etherboot
-  endif
-endef
-
-define Image/Build/Profile/ar525w
-	cp $(KDIR)/bzImage $(KDIR)/bzImage.tmp
-	$(SCRIPT_DIR)/pad_image $(1) $(KDIR)/bzImage.tmp $(KDIR)/root.$(1) 32
-	$(STAGING_DIR_HOST)/bin/airlink -b 1 $(KDIR)/bzImage.tmp $(KDIR)/root.$(1) \
-		$(BIN_DIR)/$(IMG_PREFIX)-$(1)-ar525w.img
-	$(STAGING_DIR_HOST)/bin/airlink -e -b 1 $(KDIR)/bzImage.tmp $(KDIR)/root.$(1) \
-		$(BIN_DIR)/$(IMG_PREFIX)-$(1)-ar525w-web.img
-endef
-
-define Image/Build/Profile/sitecom
-	cp $(KDIR)/bzImage $(KDIR)/bzImage.tmp
-	#32k config data + 20 bytes header + 2 bytes checksum after kernel image
-	$(SCRIPT_DIR)/pad_image $(1) $(KDIR)/bzImage.tmp $(KDIR)/root.$(1) 32790
-	$(TOPDIR)/target/linux/rdc/image/mkimg_sitecom.pl $(KDIR)/bzImage.tmp > $(KDIR)/tmp.img
-	cat $(KDIR)/root.$(1) >> $(KDIR)/tmp.img
-	cp $(KDIR)/tmp.img $(BIN_DIR)/$(IMG_PREFIX)-$(1)-sitecom.img
-	rm $(KDIR)/tmp.img $(KDIR)/bzImage.tmp
-endef
-
-define Image/Build/Profile/bifferboard
-	$(TOPDIR)/target/linux/rdc/image/mkimg_bifferboard.py $(KDIR)/bzImage $(KDIR)/root.$(1) \
-		$(BIN_DIR)/$(IMG_PREFIX)-$(1)-bifferboard.img
-endef
-
-define Image/Prepare
-	$(CP) $(LINUX_DIR)/arch/x86/boot/bzImage $(KDIR)/bzImage
-	$(call Image/Prepare/bootscript)
-	$(call Image/Prepare/grub2)
-endef
-
-define Image/Build/Initramfs
-	$(CP) $(KDIR)/bzImage-initramfs $(BIN_DIR)/$(IMG_PREFIX)-ramfs.bzImage
-endef
-
-define Image/Build
-	$(call Image/Build/$(1))
-	$(call Image/Build/bootscript,$(1))
-  ifneq ($(1),iso)
-	$(call Image/Build/grub2,$(1))
-	$(call Image/Build/vdi,$(1))
-	$(call Image/Build/vmdk,$(1))
-	$(CP) $(KDIR)/root.$(1) $(BIN_DIR)/$(IMG_PREFIX)-rootfs-$(1).img
-  else
-	$(CP) $(KDIR)/root.iso $(BIN_DIR)/$(IMG_PREFIX).iso
-  endif
-	$(CP) $(KDIR)/bzImage $(BIN_DIR)/$(IMG_PREFIX)-vmlinuz
-	$(call Image/Build/gzip/$(1))
-	$(call Image/Build/Profile/$(PROFILE),$(1))
-ifeq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),y)
-	$(call Image/Build/Initramfs)
-endif
-endef
-
-$(eval $(call BuildImage))
diff --git a/target/linux/x86/image/gen_image_generic.sh b/target/linux/x86/image/gen_image_generic.sh
deleted file mode 100755
index 9d11efb..0000000
--- a/target/linux/x86/image/gen_image_generic.sh
+++ /dev/null
@@ -1,39 +0,0 @@
-#!/usr/bin/env bash
-# Copyright (C) 2006-2012 OpenWrt.org
-set -x
-[ $# == 5 -o $# == 6 ] || {
-    echo "SYNTAX: $0 <file> <kernel size> <kernel directory> <rootfs size> <rootfs image> [<align>]"
-    exit 1
-}
-
-OUTPUT="$1"
-KERNELSIZE="$2"
-KERNELDIR="$3"
-ROOTFSSIZE="$4"
-ROOTFSIMAGE="$5"
-ALIGN="$6"
-
-rm -f "$OUTPUT"
-
-head=16
-sect=63
-cyl=$(( ($KERNELSIZE + $ROOTFSSIZE) * 1024 * 1024 / ($head * $sect * 512)))
-
-# create partition table
-set `ptgen -o "$OUTPUT" -h $head -s $sect -p ${KERNELSIZE}m -p ${ROOTFSSIZE}m ${ALIGN:+-l $ALIGN}`
-
-KERNELOFFSET="$(($1 / 512))"
-KERNELSIZE="$(($2 / 512))"
-ROOTFSOFFSET="$(($3 / 512))"
-ROOTFSSIZE="$(($4 / 512))"
-
-BLOCKS="$((($KERNELSIZE / 2) - 1))"
-
-[ -n "$PADDING" ] && dd if=/dev/zero of="$OUTPUT" bs=512 seek="$ROOTFSOFFSET" conv=notrunc count="$ROOTFSSIZE"
-dd if="$ROOTFSIMAGE" of="$OUTPUT" bs=512 seek="$ROOTFSOFFSET" conv=notrunc
-
-[ -n "$NOGRUB" ] && exit 0
-
-genext2fs -d "$KERNELDIR" -b "$BLOCKS" "$OUTPUT.kernel"
-dd if="$OUTPUT.kernel" of="$OUTPUT" bs=512 seek="$KERNELOFFSET" conv=notrunc
-rm -f "$OUTPUT.kernel"
diff --git a/target/linux/x86/image/gen_image_olpc.sh b/target/linux/x86/image/gen_image_olpc.sh
deleted file mode 100755
index 82bc4ed..0000000
--- a/target/linux/x86/image/gen_image_olpc.sh
+++ /dev/null
@@ -1,35 +0,0 @@
-#!/usr/bin/env bash
-# Copyright (C) 2006-2010 OpenWrt.org
-set -x 
-[ $# == 5 ] || {
-    echo "SYNTAX: $0 <file> <kernel size> <kernel directory> <rootfs size> <rootfs image>"
-    exit 1
-}
-
-OUTPUT="$1"
-KERNELSIZE="$2"
-KERNELDIR="$3"
-ROOTFSSIZE="$4"
-ROOTFSIMAGE="$5"
-
-rm -f "$OUTPUT"
-
-head=16
-sect=63
-cyl=$(( ($KERNELSIZE + $ROOTFSSIZE) * 1024 * 1024 / ($head * $sect * 512)))
-
-# create partition table
-set `ptgen -o "$OUTPUT" -h $head -s $sect -p ${KERNELSIZE}m -p ${ROOTFSSIZE}m`
-
-KERNELOFFSET="$(($1 / 512))"
-KERNELSIZE="$(($2 / 512))"
-ROOTFSOFFSET="$(($3 / 512))"
-ROOTFSSIZE="$(($4 / 512))"
-
-BLOCKS="$((($KERNELSIZE / 2) - 1))"
-
-genext2fs -d "$KERNELDIR" -b "$BLOCKS" "$OUTPUT.kernel"
-dd if="$OUTPUT.kernel" of="$OUTPUT" bs=512 seek="$KERNELOFFSET" conv=notrunc
-[ -n "$PADDING" ] && dd if=/dev/zero of="$OUTPUT" bs=512 seek="$ROOTFSOFFSET" conv=notrunc count="$ROOTFSSIZE"
-dd if="$ROOTFSIMAGE" of="$OUTPUT" bs=512 seek="$ROOTFSOFFSET" conv=notrunc
-rm -f "$OUTPUT.kernel"
diff --git a/target/linux/x86/image/grub-early.cfg b/target/linux/x86/image/grub-early.cfg
deleted file mode 100644
index 4a5b5a6..0000000
--- a/target/linux/x86/image/grub-early.cfg
+++ /dev/null
@@ -1 +0,0 @@
-configfile (hd0,msdos1)/boot/grub/grub.cfg
diff --git a/target/linux/x86/image/grub-iso.cfg b/target/linux/x86/image/grub-iso.cfg
deleted file mode 100644
index 3d47a95..0000000
--- a/target/linux/x86/image/grub-iso.cfg
+++ /dev/null
@@ -1,10 +0,0 @@
-@SERIAL_CONFIG@
-@TERMINAL_CONFIG@
-
-set default="0"
-set timeout="@TIMEOUT@"
-set root='(cd)'
-
-menuentry "OpenWrt" {
-	linux /boot/vmlinuz @CMDLINE@ noinitrd
-}
diff --git a/target/linux/x86/image/grub.cfg b/target/linux/x86/image/grub.cfg
deleted file mode 100644
index 33b9d0b..0000000
--- a/target/linux/x86/image/grub.cfg
+++ /dev/null
@@ -1,13 +0,0 @@
-@SERIAL_CONFIG@
-@TERMINAL_CONFIG@
-
-set default="0"
-set timeout="@TIMEOUT@"
-set root='(hd0,msdos1)'
-
-menuentry "OpenWrt" {
-	linux /boot/vmlinuz @CMDLINE@ noinitrd
-}
-menuentry "OpenWrt (failsafe)" {
-	linux /boot/vmlinuz failsafe=true @CMDLINE@ noinitrd
-}
diff --git a/target/linux/x86/image/mkimg_bifferboard.py b/target/linux/x86/image/mkimg_bifferboard.py
deleted file mode 100755
index 5444abe..0000000
--- a/target/linux/x86/image/mkimg_bifferboard.py
+++ /dev/null
@@ -1,50 +0,0 @@
-#!/usr/bin/env python
-
-"""
-   Create firmware for 4/8MB Bifferboards, suitable for uploading using
-   either bb_upload8.py or bb_eth_upload8.py
-"""
-
-import struct, sys
-
-# Increase the kmax value if the script gives errors about the kernel being 
-# too large.  You need to set the Biffboot kmax value to the same value you
-# use here.
-kmax = 0x10
-
-# No need to change this for 4MB devices, it's only used to tell you if 
-# the firmware is too large!
-flash_size = 0x800000
-
-# This is always the same, for 1MB, 4MB and 8MB devices
-config_extent = 0x6000
-
-kernel_extent = kmax * 0x10000
-
-if __name__ == "__main__":
-
-  if len(sys.argv) != 4:
-    print  "usage: mkimg_bifferboard.py <kernel> <rootfs> <output file>"
-    sys.exit(-1)
-    
-  bzimage = sys.argv[1]
-  rootfs = sys.argv[2]
-  target = sys.argv[3]
-
-  # Kernel first
-  fw = file(bzimage).read()
-  if len(fw) > (kernel_extent - config_extent):
-    raise IOError("Kernel too large")
-
-  # Pad up to end of kernel partition
-  while len(fw) < (kernel_extent - config_extent):
-    fw += "\xff"
-
-  fw += file(rootfs).read()
-
-  # Check length of total
-  if len(fw) > (flash_size - 0x10000 - config_extent):
-    raise IOError("Rootfs too large")
-
-  file(target,"wb").write(fw)
-  print "Firmware written to '%s'" % target
diff --git a/target/linux/x86/image/mkimg_sitecom.pl b/target/linux/x86/image/mkimg_sitecom.pl
deleted file mode 100755
index cfd5e65..0000000
--- a/target/linux/x86/image/mkimg_sitecom.pl
+++ /dev/null
@@ -1,11 +0,0 @@
-#!/usr/bin/perl
-
-open (bzimg, @ARGV[0]);
-while (<bzimg>) { $i .= $_; }
-$i .= pack "v", -(unpack "%v*", $i); 
-print "CSYS";
-print pack("V", length($i));
-print pack("V", 0);
-print "WRRM";
-print pack("V", length($i));
-print $i;
diff --git a/target/linux/x86/image/olpc.fth b/target/linux/x86/image/olpc.fth
deleted file mode 100644
index 5914be6..0000000
--- a/target/linux/x86/image/olpc.fth
+++ /dev/null
@@ -1,5 +0,0 @@
-\ Boot script
-" u:\boot\vmlinuz" to boot-device
-" @CMDLINE@ noinitrd console=ttyS0,115200 console=tty0" to boot-file
-unfreeze
-boot
diff --git a/target/linux/x86/kvm_guest/config-3.10 b/target/linux/x86/kvm_guest/config-3.10
deleted file mode 100644
index 3355c34..0000000
--- a/target/linux/x86/kvm_guest/config-3.10
+++ /dev/null
@@ -1,96 +0,0 @@
-CONFIG_ACPI=y
-# CONFIG_ACPI_AC is not set
-# CONFIG_ACPI_BATTERY is not set
-CONFIG_ACPI_BLACKLIST_YEAR=0
-CONFIG_ACPI_BUTTON=y
-# CONFIG_ACPI_CMPC is not set
-# CONFIG_ACPI_CONTAINER is not set
-# CONFIG_ACPI_CUSTOM_DSDT is not set
-# CONFIG_ACPI_DEBUG is not set
-# CONFIG_ACPI_DOCK is not set
-# CONFIG_ACPI_EC_DEBUGFS is not set
-# CONFIG_ACPI_FAN is not set
-# CONFIG_ACPI_INITRD_TABLE_OVERRIDE is not set
-# CONFIG_ACPI_PCI_SLOT is not set
-CONFIG_ACPI_PROCESSOR=y
-# CONFIG_ACPI_PROCESSOR_AGGREGATOR is not set
-# CONFIG_ACPI_PROCFS is not set
-# CONFIG_ACPI_PROCFS_POWER is not set
-# CONFIG_ACPI_PROC_EVENT is not set
-# CONFIG_ACPI_SBS is not set
-# CONFIG_ACPI_THERMAL is not set
-# CONFIG_ACPI_WMI is not set
-# CONFIG_ASUS_LAPTOP is not set
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_CPU_IDLE_GOV_MENU=y
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_EEEPC_LAPTOP is not set
-# CONFIG_EFI is not set
-CONFIG_HOTPLUG_PCI=y
-CONFIG_HOTPLUG_PCI_ACPI=y
-# CONFIG_HOTPLUG_PCI_ACPI_IBM is not set
-# CONFIG_HOTPLUG_PCI_COMPAQ is not set
-# CONFIG_HOTPLUG_PCI_CPCI is not set
-# CONFIG_HOTPLUG_PCI_IBM is not set
-CONFIG_HOTPLUG_PCI_PCIE=y
-# CONFIG_HOTPLUG_PCI_SHPC is not set
-# CONFIG_HPET is not set
-# CONFIG_HP_ACCEL is not set
-CONFIG_HVC_DRIVER=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_HW_RANDOM_VIRTIO is not set
-CONFIG_HYPERVISOR_GUEST=y
-CONFIG_INPUT=y
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_INTEL_IPS is not set
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KVM is not set
-CONFIG_KVM_GUEST=y
-# CONFIG_LGUEST is not set
-# CONFIG_LGUEST_GUEST is not set
-CONFIG_NLS=y
-CONFIG_NO_HZ=y
-CONFIG_PARAVIRT=y
-CONFIG_PARAVIRT_CLOCK=y
-# CONFIG_PARAVIRT_DEBUG is not set
-CONFIG_PARAVIRT_TIME_ACCOUNTING=y
-CONFIG_PCIEAER=y
-CONFIG_PCIEPORTBUS=y
-CONFIG_PCI_IOAPIC=y
-CONFIG_PCI_LABEL=y
-CONFIG_PCI_MMCONFIG=y
-CONFIG_PNP=y
-CONFIG_PNPACPI=y
-CONFIG_PNP_DEBUG_MESSAGES=y
-# CONFIG_PVPANIC is not set
-# CONFIG_SCSI_VIRTIO is not set
-CONFIG_SERIAL_8250_PNP=y
-# CONFIG_THINKPAD_ACPI is not set
-# CONFIG_TOPSTAR_LAPTOP is not set
-# CONFIG_TOSHIBA_BT_RFKILL is not set
-# CONFIG_VGACON_SOFT_SCROLLBACK is not set
-CONFIG_VGA_CONSOLE=y
-# CONFIG_VHOST_NET is not set
-CONFIG_VIRTIO=y
-CONFIG_VIRTIO_BLK=y
-CONFIG_VIRTIO_CONSOLE=y
-# CONFIG_VIRTIO_NET is not set
-CONFIG_VIRTIO_PCI=y
-CONFIG_VIRTUALIZATION=y
-# CONFIG_VMWARE_BALLOON is not set
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_X86_ACPI_CPUFREQ is not set
-# CONFIG_X86_E_POWERSAVER is not set
-# CONFIG_X86_GENERIC is not set
-# CONFIG_X86_INTEL_LPSS is not set
-CONFIG_X86_INTERNODE_CACHE_SHIFT=4
-CONFIG_X86_L1_CACHE_SHIFT=4
-# CONFIG_X86_LONGHAUL is not set
-# CONFIG_X86_PAT is not set
-# CONFIG_X86_PCC_CPUFREQ is not set
-CONFIG_X86_PM_TIMER=y
-# CONFIG_X86_PPRO_FENCE is not set
-# CONFIG_XEN_PRIVILEGED_GUEST is not set
-# CONFIG_XO15_EBOOK is not set
diff --git a/target/linux/x86/kvm_guest/target.mk b/target/linux/x86/kvm_guest/target.mk
deleted file mode 100644
index d3f950f..0000000
--- a/target/linux/x86/kvm_guest/target.mk
+++ /dev/null
@@ -1,3 +0,0 @@
-BOARDNAME:=KVM Guest
-FEATURES:=ext4 pci usb
-DEFAULT_PACKAGES += kmod-virtio-balloon kmod-virtio-net kmod-virtio-random
diff --git a/target/linux/x86/modules.mk b/target/linux/x86/modules.mk
deleted file mode 100644
index f8cb3a7..0000000
--- a/target/linux/x86/modules.mk
+++ /dev/null
@@ -1,330 +0,0 @@
-#
-# Copyright (C) 2006-2012 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-define KernelPackage/cs5535
-  SUBMENU:=$(BLOCK_MENU)
-  TITLE:=NSC/AMD CS5535 chipset support
-  DEPENDS:=@TARGET_x86
-  KCONFIG:=CONFIG_BLK_DEV_CS5535
-  FILES=$(LINUX_DIR)/drivers/ide/cs5535.ko
-  AUTOLOAD:=$(call AutoLoad,30,cs5535,1)
-  $(call AddDepends/ide)
-endef
-
-define KernelPackage/cs5535/description
-  Kernel module for the NSC/AMD CS5535 companion chip
-endef
-
-$(eval $(call KernelPackage,cs5535))
-
-
-define KernelPackage/cs5536
-  SUBMENU:=$(BLOCK_MENU)
-  TITLE:=AMD CS5536 chipset support
-  DEPENDS:=@TARGET_x86
-  KCONFIG:=CONFIG_BLK_DEV_CS5536
-  FILES=$(LINUX_DIR)/drivers/ide/cs5536.ko
-  AUTOLOAD:=$(call AutoLoad,30,cs5536,1)
-  $(call AddDepends/ide)
-endef
-
-define KernelPackage/cs5536/description
-  Kernel module for the AMD CS5536 Geode LX companion chip
-endef
-
-$(eval $(call KernelPackage,cs5536))
-
-
-define KernelPackage/pata-cs5535
-  SUBMENU:=$(BLOCK_MENU)
-  TITLE:=CS5535 PATA support
-  DEPENDS:=@TARGET_x86 @PCI_SUPPORT
-  KCONFIG:=CONFIG_PATA_CS5535
-  FILES=$(LINUX_DIR)/drivers/ata/pata_cs5535.ko
-  AUTOLOAD:=$(call AutoLoad,30,pata_cs5535,1)
-  $(call AddDepends/ata)
-endef
-
-define KernelPackage/pata-cs5535/description
-  Kernel module for the NSC/AMD CS5535 companion chip
-endef
-
-$(eval $(call KernelPackage,pata-cs5535))
-
-
-define KernelPackage/pata-cs5536
-  SUBMENU:=$(BLOCK_MENU)
-  TITLE:=CS5536 PATA support
-  DEPENDS:=@TARGET_x86 @PCI_SUPPORT
-  KCONFIG:=CONFIG_PATA_CS5536
-  FILES=$(LINUX_DIR)/drivers/ata/pata_cs5536.ko
-  AUTOLOAD:=$(call AutoLoad,30,pata_cs5536,1)
-  $(call AddDepends/ata)
-endef
-
-define KernelPackage/pata-cs5536/description
-  Kernel module for the AMD CS5536 Geode LX companion chip
-endef
-
-$(eval $(call KernelPackage,pata-cs5536))
-
-
-define KernelPackage/cpu-msr
-  SUBMENU:=$(OTHER_MENU)
-  TITLE:=x86 CPU MSR support
-  DEPENDS:=@TARGET_x86
-  KCONFIG:=CONFIG_X86_MSR
-  FILES:=$(LINUX_DIR)/arch/x86/kernel/msr.ko
-  AUTOLOAD:=$(call AutoLoad,20,msr)
-endef
-
-define KernelPackage/cpu-msr/description
- Kernel module for Model Specific Registers support in x86 CPUs
-endef
-
-$(eval $(call KernelPackage,cpu-msr))
-
-define KernelPackage/gpio-cs5535-new
-  SUBMENU:=$(OTHER_MENU)
-  TITLE:=AMD CS5535/CS5536 GPIO driver with improved sysfs support
-  DEPENDS:=@TARGET_x86 +kmod-cs5535-mfd
-  KCONFIG:=CONFIG_GPIO_CS5535
-  FILES:=$(LINUX_DIR)/drivers/gpio/gpio-cs5535.ko
-  AUTOLOAD:=$(call AutoLoad,50,gpio-cs5535)
-endef
-
-define KernelPackage/gpio-cs5535-new/description
- This package contains the new AMD CS5535/CS5536 GPIO driver
-endef
-
-$(eval $(call KernelPackage,gpio-cs5535-new))
-
-define KernelPackage/gpio-nsc
-  SUBMENU:=$(OTHER_MENU)
-  TITLE:=Natsemi GPIO support
-  DEPENDS:=@TARGET_x86
-  KCONFIG:=CONFIG_NSC_GPIO
-  FILES:=$(LINUX_DIR)/drivers/char/nsc_gpio.ko
-  AUTOLOAD:=$(call AutoLoad,40,nsc_gpio)
-endef
-
-define KernelPackage/gpio-nsc/description
- Kernel module for Natsemi GPIO
-endef
-
-$(eval $(call KernelPackage,gpio-nsc))
-
-
-define KernelPackage/gpio-pc8736x
-  SUBMENU:=$(OTHER_MENU)
-  TITLE:=PC8736x GPIO support
-  DEPENDS:=@TARGET_x86 +kmod-gpio-nsc
-  KCONFIG:=CONFIG_PC8736x_GPIO
-  FILES:=$(LINUX_DIR)/drivers/char/pc8736x_gpio.ko
-  AUTOLOAD:=$(call AutoLoad,40,pc8736x_gpio)
-endef
-
-define KernelPackage/gpio-pc8736x/description
- Kernel module for PC8736x GPIO
-endef
-
-$(eval $(call KernelPackage,gpio-pc8736x))
-
-
-define KernelPackage/gpio-scx200
-  SUBMENU:=$(OTHER_MENU)
-  TITLE:=Natsemi SCX200 GPIO support
-  DEPENDS:=@TARGET_x86 +kmod-gpio-nsc
-  KCONFIG:=CONFIG_SCx200_GPIO
-  FILES:=$(LINUX_DIR)/drivers/char/scx200_gpio.ko
-  AUTOLOAD:=$(call AutoLoad,50,scx200_gpio)
-endef
-
-define KernelPackage/gpio-scx200/description
- Kernel module for SCX200 GPIO
-endef
-
-$(eval $(call KernelPackage,gpio-scx200))
-
-define KernelPackage/wdt-geode
-  SUBMENU:=$(OTHER_MENU)
-  TITLE:=Geode/LX Watchdog timer
-  DEPENDS:=@TARGET_x86 +kmod-cs5535-mfgpt
-  KCONFIG:=CONFIG_GEODE_WDT
-  FILES:=$(LINUX_DIR)/drivers/$(WATCHDOG_DIR)/geodewdt.ko
-  AUTOLOAD:=$(call AutoLoad,50,geodewdt)
-endef
-
-define KernelPackage/wdt-geode/description
-  Kernel module for Geode watchdog timer.
-endef
-
-$(eval $(call KernelPackage,wdt-geode))
-
-
-define KernelPackage/cs5535-clockevt
-  SUBMENU:=$(OTHER_MENU)
-  TITLE:=CS5535/CS5536 high-res timer (MFGPT) events
-  DEPENDS:=@TARGET_x86 +kmod-cs5535-mfgpt
-  KCONFIG:=CONFIG_CS5535_CLOCK_EVENT_SRC
-  FILES:=$(LINUX_DIR)/drivers/clocksource/cs5535-clockevt.ko
-  AUTOLOAD:=$(call AutoLoad,50,cs5535-clockevt)
-endef
-
-define KernelPackage/cs5535-clockevt/description
-  Kernel module for CS5535/6 high-res clock event source
-endef
-
-$(eval $(call KernelPackage,cs5535-clockevt))
-
-
-define KernelPackage/cs5535-mfgpt
-  SUBMENU:=$(OTHER_MENU)
-  TITLE:=CS5535/6 Multifunction General Purpose Timer
-  DEPENDS:=@TARGET_x86 +kmod-cs5535-mfd
-  KCONFIG:=CONFIG_CS5535_MFGPT
-  FILES:=$(LINUX_DIR)/drivers/misc/cs5535-mfgpt.ko
-  AUTOLOAD:=$(call AutoLoad,45,cs5535-mfgpt)
-endef
-
-define KernelPackage/cs5535-mfgpt/description
-  Kernel module for CS5535/6 multifunction general purpose timer.
-endef
-
-$(eval $(call KernelPackage,cs5535-mfgpt))
-
-
-define KernelPackage/cs5535-mfd
-  SUBMENU:=$(OTHER_MENU)
-  TITLE:=CS5535/6 Multifunction General Purpose Driver
-  DEPENDS:=@TARGET_x86
-  KCONFIG:=CONFIG_MFD_CS5535
-  FILES:= \
-  	$(LINUX_DIR)/drivers/mfd/mfd-core.ko \
-  	$(LINUX_DIR)/drivers/mfd/cs5535-mfd.ko
-  AUTOLOAD:=$(call AutoLoad,44,mfd-core cs5535-mfd)
-endef
-
-define KernelPackage/cs5535-mfd/description
-  Core driver for CS5535/CS5536 MFD functions.
-endef
-
-$(eval $(call KernelPackage,cs5535-mfd))
-
-define KernelPackage/wdt-sc520
-  SUBMENU:=$(OTHER_MENU)
-  TITLE:=Natsemi SC520 Watchdog support
-  DEPENDS:=@TARGET_x86
-  KCONFIG:=CONFIG_SC520_WDT
-  FILES:=$(LINUX_DIR)/drivers/$(WATCHDOG_DIR)/sc520_wdt.ko
-  AUTOLOAD:=$(call AutoLoad,50,sc520_wdt)
-endef
-
-define KernelPackage/wdt-sc520/description
-  Kernel module for SC520 Watchdog
-endef
-
-$(eval $(call KernelPackage,wdt-sc520))
-
-
-define KernelPackage/wdt-scx200
-  SUBMENU:=$(OTHER_MENU)
-  TITLE:=Natsemi SCX200 Watchdog support
-  DEPENDS:=@TARGET_x86
-  KCONFIG:=CONFIG_SCx200_WDT
-  FILES:=$(LINUX_DIR)/drivers/$(WATCHDOG_DIR)/scx200_wdt.ko
-  AUTOLOAD:=$(call AutoLoad,50,scx200_wdt)
-endef
-
-define KernelPackage/wdt-scx200/description
- Kernel module for SCX200 Watchdog
-endef
-
-$(eval $(call KernelPackage,wdt-scx200))
-
-I2C_SCX200_MODULES:=\
-  CONFIG_SCx200_I2C:drivers/i2c/busses/scx200_i2c
-
-define KernelPackage/i2c-scx200
-  $(call i2c_defaults,$(I2C_SCX200_MODULES),59)
-  TITLE:=Geode SCx200 I2C using GPIO pins
-  DEPENDS:=@PCI_SUPPORT @TARGET_x86 +kmod-i2c-algo-bit
-  KCONFIG+= \
-	CONFIG_SCx200_I2C_SCL=12 \
-	CONFIG_SCx200_I2C_SDA=13
-endef
-
-define KernelPackage/i2c-scx200/description
- Kernel module for I2C using GPIO pins on the Geode SCx200 processors.
-endef
-
-$(eval $(call KernelPackage,i2c-scx200))
-
-
-I2C_SCX200_ACB_MODULES:=\
-  CONFIG_SCx200_ACB:drivers/i2c/busses/scx200_acb
-
-define KernelPackage/i2c-scx200-acb
-  $(call i2c_defaults,$(I2C_SCX200_ACB_MODULES),59)
-  TITLE:=Geode SCx200 ACCESS.bus support
-  DEPENDS:=@PCI_SUPPORT @TARGET_x86 +kmod-i2c-algo-bit
-endef
-
-define KernelPackage/i2c-scx200-acb/description
- Kernel module for I2C using the ACCESS.bus controllers on the Geode SCx200
- and SC1100 processors and the CS5535 and CS5536 Geode companion devices.
-endef
-
-$(eval $(call KernelPackage,i2c-scx200-acb))
-
-
-define KernelPackage/leds-wrap
-  SUBMENU:=$(LEDS_MENU)
-  TITLE:=PCengines WRAP LED support
-  DEPENDS:=@TARGET_x86 +kmod-gpio-scx200
-  KCONFIG:=CONFIG_LEDS_WRAP
-  FILES:=$(LINUX_DIR)/drivers/leds/leds-wrap.ko
-  AUTOLOAD:=$(call AutoLoad,50,leds-wrap)
-endef
-
-define KernelPackage/leds-wrap/description
- Kernel module for PCengines WRAP LEDs
-endef
-
-$(eval $(call KernelPackage,leds-wrap))
-
-
-define KernelPackage/leds-net48xx
-  SUBMENU:=$(LEDS_MENU)
-  TITLE:=Soekris Net48xx LED support
-  DEPENDS:=@TARGET_x86 +kmod-gpio-scx200
-  KCONFIG:=CONFIG_LEDS_NET48XX
-  FILES:=$(LINUX_DIR)/drivers/leds/leds-net48xx.ko
-  AUTOLOAD:=$(call AutoLoad,50,leds-net48xx)
-endef
-
-define KernelPackage/leds-net48xx/description
- Kernel module for Soekris Net48xx LEDs
-endef
-
-$(eval $(call KernelPackage,leds-net48xx))
-
-define KernelPackage/rdc321x-wdt
-  SUBMENU:=$(OTHER_MENU)
-  TITLE:=RDC321x watchdog
-  DEPENDS:=@TARGET_x86_rdc
-  KCONFIG:=CONFIG_RDC321X_WDT
-  FILES:=$(LINUX_DIR)/drivers/$(WATCHDOG_DIR)/rdc321x_wdt.ko
-  AUTOLOAD:=$(call AutoLoad,50,rdc321x_wdt)
-endef
-
-define KernelPackage/rdc321x-wdt/description
-  RDC-321x watchdog driver
-endef
-
-$(eval $(call KernelPackage,rdc321x-wdt))
-
diff --git a/target/linux/x86/net5501/base-files/etc/config/network b/target/linux/x86/net5501/base-files/etc/config/network
deleted file mode 100644
index 330c60b..0000000
--- a/target/linux/x86/net5501/base-files/etc/config/network
+++ /dev/null
@@ -1,26 +0,0 @@
-# Copyright (C) 2011 OpenWrt.org
-
-config interface loopback
-	option ifname	lo
-	option proto	static
-	option ipaddr	127.0.0.1
-	option netmask	255.0.0.0
-
-config interface lan
-	option ifname	"eth1 eth2 eth3"
-	option type 	bridge
-	option proto	static
-	option ipaddr	192.168.1.1
-	option netmask	255.255.255.0
-	option ip6assign 60
-
-config interface wan
-	option ifname	eth0
-	option proto	dhcp
-
-config interface wan6
-	option ifname   @wan
-	option proto    dhcpv6
-
-config globals globals
-	option ula_prefix auto
diff --git a/target/linux/x86/net5501/base-files/etc/config/system b/target/linux/x86/net5501/base-files/etc/config/system
deleted file mode 100644
index 5db7bc2..0000000
--- a/target/linux/x86/net5501/base-files/etc/config/system
+++ /dev/null
@@ -1,16 +0,0 @@
-config system
-	option hostname	OpenWrt
-	option timezone	UTC
-
-config timeserver ntp
-	list server	0.openwrt.pool.ntp.org
-	list server	1.openwrt.pool.ntp.org
-	list server	2.openwrt.pool.ntp.org
-	list server	3.openwrt.pool.ntp.org
-
-config led
-	option default	1
-	option name	Heartbeat
-	option sysfs	'net5501:1'
-	option trigger	heartbeat
-
diff --git a/target/linux/x86/net5501/base-files/etc/hotplug.d/button/50-reboot b/target/linux/x86/net5501/base-files/etc/hotplug.d/button/50-reboot
deleted file mode 100644
index bf893c1..0000000
--- a/target/linux/x86/net5501/base-files/etc/hotplug.d/button/50-reboot
+++ /dev/null
@@ -1,13 +0,0 @@
-#!/bin/sh
-
-logger -t button -p daemon.info "$BUTTON/$ACTION"
-
-case "$BUTTON/$ACTION" in
-
-reset/released)
-  reboot -f
-  ;;
-
-esac
-
-exit 0
diff --git a/target/linux/x86/net5501/config-3.10 b/target/linux/x86/net5501/config-3.10
deleted file mode 100644
index 0875405..0000000
--- a/target/linux/x86/net5501/config-3.10
+++ /dev/null
@@ -1,18 +0,0 @@
-# CONFIG_ATA_PIIX is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIO_SYSFS=y
-# CONFIG_HIGHMEM64G is not set
-CONFIG_HWMON=y
-# CONFIG_ISDN is not set
-# CONFIG_M486 is not set
-# CONFIG_MATH_EMULATION is not set
-CONFIG_MGEODE_LX=y
-CONFIG_PATA_CS5536=y
-# CONFIG_SCx200 is not set
-CONFIG_THERMAL_HWMON=y
-CONFIG_X86_CMOV=y
-CONFIG_X86_DEBUGCTLMSR=y
-CONFIG_X86_TSC=y
-CONFIG_X86_USE_3DNOW=y
-CONFIG_X86_USE_PPRO_CHECKSUM=y
diff --git a/target/linux/x86/net5501/target.mk b/target/linux/x86/net5501/target.mk
deleted file mode 100644
index e8a2bd8..0000000
--- a/target/linux/x86/net5501/target.mk
+++ /dev/null
@@ -1,33 +0,0 @@
-BOARDNAME:=Soekris net5501
-FEATURES:=squashfs ext4 pci usb gpio
-DEFAULT_PACKAGES += kmod-crypto-hw-geode kmod-crypto-ocf \
-			kmod-gpio-cs5535-new kmod-gpio-nsc \
-			kmod-wdt-geode kmod-cs5535-clockevt kmod-cs5535-mfgpt \
-			kmod-cs5536 \
-			kmod-hwmon-core kmod-hwmon-pc87360 kmod-gpio-pc8736x \
-			kmod-via-rhine kmod-solos-pci \
-			kmod-i2c-core kmod-i2c-gpio \
-			kmod-i2c-algo-bit kmod-i2c-algo-pca kmod-i2c-algo-pcf \
-			kmod-i2c-scx200-acb \
-			kmod-usb-core kmod-usb2 kmod-usb-ohci \
-			kmod-cfg80211 kmod-mac80211 \
-			kmod-mppe kmod-pppoe kmod-pppoa kmod-pppol2tp \
-			kmod-ath kmod-ath5k kmod-ath9k \
-			kmod-leds-gpio kmod-input-gpio-keys-polled \
-			kmod-button-hotplug \
-			kmod-ledtrig-heartbeat kmod-ledtrig-gpio \
-			kmod-ledtrig-netdev \
-			kmod-cpu-msr \
-			hwclock wpad
-
-CS5535_MASK:=0x01000040
-
-CPU_TYPE := geode
-
-define Target/Description
-	Build firmware images for Soekris net5501 board
-endef
-
-define KernelPackage/gpio-cs5535-new/install
-	sed -i -r -e 's/$$$$$$$$/ mask=$(CS5535_MASK)/' $(1)/etc/modules.d/??-gpio-cs5535-new
-endef
diff --git a/target/linux/x86/olpc/base-files/etc/X11/xorg.conf b/target/linux/x86/olpc/base-files/etc/X11/xorg.conf
deleted file mode 100644
index d98a8f8..0000000
--- a/target/linux/x86/olpc/base-files/etc/X11/xorg.conf
+++ /dev/null
@@ -1,71 +0,0 @@
-# xorg configuration
-
-Section "ServerLayout"
-	Identifier     "Default Layout"
-	Screen      0  "Screen0" 0 0
-	InputDevice    "Mouse0" "CorePointer"
-	InputDevice    "Keyboard0" "CoreKeyboard"
-EndSection
-
-Section "Files"
-	FontPath     "/usr/lib/X11/fonts/misc"
-EndSection
-
-Section "Module"
-	Load  "dbe"
-	Load  "extmod"
-	Load  "fbdevhw"
-#	Load  "glx"
-	Load  "record"
-	Load  "freetype"
-	Load  "type1"
-EndSection
-
-Section "InputDevice"
-	Identifier  "Keyboard0"
-	Driver      "keyboard"
-	Option	    "XkbModel" "pc105"
-	Option	    "XkbLayout" "us"
-EndSection
-
-Section "InputDevice"
-	Identifier  "Mouse0"
-	Driver      "mouse"
-	Option	    "Protocol" "PS/2"
-	Option	    "Device" "/dev/psaux"
-	Option	    "ZAxisMapping" "4 5"
-	Option	    "Emulate3Buttons" "yes"
-EndSection
-
-Section "Monitor"
-	Identifier   "Monitor0"
-	VendorName   "Monitor Vendor"
-	ModelName    "OWRT"
-	Option	     "dpms"
-EndSection
-
-Section "Device"
-	Identifier  "FBDev"
-	Driver      "fbdev"
-	#Option     "shadowfb" "off"
-	VideoRam    4096
-EndSection
-
-Section "Screen"
-    Identifier	"Screen0"
-    Device	"FBDev"
-    Monitor	"Monitor0"
-    DefaultDepth 16
-
-    SubSection "Display"
-        Depth		16
-        Modes		"1200x900-75"
-    EndSubsection
-
-EndSection
-
-Section "DRI"
-	Group        0
-	Mode         0666
-EndSection
-
diff --git a/target/linux/x86/olpc/base-files/etc/config/network b/target/linux/x86/olpc/base-files/etc/config/network
deleted file mode 100644
index dc0bee1..0000000
--- a/target/linux/x86/olpc/base-files/etc/config/network
+++ /dev/null
@@ -1,16 +0,0 @@
-# Copyright (C) 2006 OpenWrt.org
-
-config interface loopback
-        option ifname   lo
-        option proto    static
-        option ipaddr   127.0.0.1
-        option netmask  255.0.0.0
-
-config interface wlan
-        option ifname   eth0
-        option proto    dhcp
-
-config interface wlan6
-        option ifname   @wlan
-        option proto    dhcpv6
-        option reqprefix no
diff --git a/target/linux/x86/olpc/base-files/lib/preinit/15_essential_fs_x86 b/target/linux/x86/olpc/base-files/lib/preinit/15_essential_fs_x86
deleted file mode 100644
index e4a380f..0000000
--- a/target/linux/x86/olpc/base-files/lib/preinit/15_essential_fs_x86
+++ /dev/null
@@ -1,7 +0,0 @@
-#!/bin/sh
-# Copyright (C) 2006-2010 OpenWrt.org
-# Copyright (C) 2010 Vertical Communications
-
-do_mount_procfs() {
-	mount -o noatime -t proc none /proc
-}
diff --git a/target/linux/x86/olpc/base-files/lib/upgrade/platform.sh b/target/linux/x86/olpc/base-files/lib/upgrade/platform.sh
deleted file mode 100644
index c90a4ce..0000000
--- a/target/linux/x86/olpc/base-files/lib/upgrade/platform.sh
+++ /dev/null
@@ -1,27 +0,0 @@
-platform_check_image() {
-	[ "$#" -gt 1 ] && return 1
-
-	case "$(get_magic_word "$1")" in
-		48eb) return 0;;
-		*)
-			echo "Invalid image type"
-			return 1
-		;;
-	esac
-}
-
-platform_do_upgrade() {
-	get_image "$1" > /dev/hda
-	sync
-}
-
-x86_prepare_ext2() {
-	# if we're running from ext2, we need to make sure that we have a mtd 
-	# partition that points to the active rootfs partition.
-	# however this only matters if we actually need to preserve the config files
-	[ "$SAVE_CONFIG" -eq 1 ] && return 0
-	grep rootfs /proc/mtd >/dev/null || {
-		echo /dev/hda2,65536,rootfs > /sys/module/block2mtd/parameters/block2mtd
-	}
-}
-append sysupgrade_pre_upgrade x86_prepare_ext2
diff --git a/target/linux/x86/olpc/config-3.10 b/target/linux/x86/olpc/config-3.10
deleted file mode 100644
index c46f178..0000000
--- a/target/linux/x86/olpc/config-3.10
+++ /dev/null
@@ -1,122 +0,0 @@
-# CONFIG_APM is not set
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_GENERIC=y
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-# CONFIG_BACKLIGHT_SAHARA is not set
-CONFIG_BATTERY_OLPC=y
-# CONFIG_BLK_DEV is not set
-CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_CHR_DEV_SG=y
-# CONFIG_CPU_FREQ_STAT_DETAILS is not set
-CONFIG_CPU_IDLE_GOV_MENU=y
-CONFIG_DECOMPRESS_LZO=y
-CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_EMBEDDED is not set
-CONFIG_FB=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_GEODE=y
-# CONFIG_FB_GEODE_GX is not set
-# CONFIG_FB_GEODE_GX1 is not set
-CONFIG_FB_GEODE_LX=y
-# CONFIG_FB_OLPC_DCON is not set
-# CONFIG_FB_VESA is not set
-CONFIG_FREEZER=y
-CONFIG_GPIOLIB=y
-# CONFIG_GPIO_SODAVILLE is not set
-# CONFIG_HAMRADIO is not set
-CONFIG_HIBERNATE_CALLBACKS=y
-CONFIG_HIBERNATION=y
-# CONFIG_HIGHMEM64G is not set
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_DOMAIN=y
-# CONFIG_KEXEC_JUMP is not set
-CONFIG_LCD_CLASS_DEVICE=y
-# CONFIG_LCD_PLATFORM is not set
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-# CONFIG_M486 is not set
-# CONFIG_MATH_EMULATION is not set
-CONFIG_MGEODE_LX=y
-CONFIG_MMC=y
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_SDHCI=y
-# CONFIG_MMC_SDHCI_PCI is not set
-# CONFIG_MMC_SDHCI_PLTFM is not set
-# CONFIG_MMC_TIFM_SD is not set
-# CONFIG_MMC_WBSD is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_OF_PARTS=y
-# CONFIG_MTRR is not set
-# CONFIG_NETWORK_FILESYSTEMS is not set
-CONFIG_NLS=y
-CONFIG_NO_HZ=y
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_DEVICE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_MTD=y
-CONFIG_OF_NET=y
-CONFIG_OF_PCI=y
-CONFIG_OF_PCI_IRQ=y
-CONFIG_OF_PROMTREE=y
-CONFIG_OLPC=y
-CONFIG_OPROFILE=y
-# CONFIG_OPROFILE_EVENT_MULTIPLEX is not set
-# CONFIG_PARTITION_ADVANCED is not set
-# CONFIG_PCI_GOANY is not set
-CONFIG_PCI_GOOLPC=y
-CONFIG_PCI_OLPC=y
-CONFIG_PM=y
-# CONFIG_PM_ADVANCED_DEBUG is not set
-CONFIG_PM_DEBUG=y
-CONFIG_PM_SLEEP=y
-CONFIG_PM_SLEEP_DEBUG=y
-CONFIG_PM_STD_PARTITION=""
-# CONFIG_PM_TEST_SUSPEND is not set
-# CONFIG_PM_TRACE_RTC is not set
-# CONFIG_PREEMPT_NONE is not set
-CONFIG_PREEMPT_VOLUNTARY=y
-CONFIG_PROFILING=y
-CONFIG_RD_LZO=y
-CONFIG_RELAY=y
-CONFIG_RING_BUFFER=y
-CONFIG_RING_BUFFER_ALLOW_SWAP=y
-CONFIG_SCHEDSTATS=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCx200 is not set
-# CONFIG_SERIO_APBPS2 is not set
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-CONFIG_TIMER_STATS=y
-CONFIG_TRACE_CLOCK=y
-CONFIG_USB=y
-CONFIG_USB_COMMON=y
-CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_HCD_PLATFORM is not set
-CONFIG_USB_EHCI_PCI=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_HCD_PLATFORM is not set
-CONFIG_USB_STORAGE=y
-CONFIG_USB_UHCI_HCD=y
-CONFIG_VGA_ARB=y
-CONFIG_VGA_ARB_MAX_GPUS=16
-# CONFIG_WATCHDOG is not set
-CONFIG_X86_CMOV=y
-CONFIG_X86_DEBUGCTLMSR=y
-CONFIG_X86_EXTENDED_PLATFORM=y
-# CONFIG_X86_MCE is not set
-# CONFIG_X86_RDC321X is not set
-# CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS is not set
-CONFIG_X86_TSC=y
-CONFIG_X86_USE_3DNOW=y
-CONFIG_X86_USE_PPRO_CHECKSUM=y
-# CONFIG_X86_WANT_INTEL_MID is not set
diff --git a/target/linux/x86/olpc/target.mk b/target/linux/x86/olpc/target.mk
deleted file mode 100644
index 7a56b7c..0000000
--- a/target/linux/x86/olpc/target.mk
+++ /dev/null
@@ -1,3 +0,0 @@
-BOARDNAME:=OLPC XO-1
-DEFAULT_PACKAGES += kmod-natsemi kmod-ne2k-pci kmod-libertas
-FEATURES += broken
diff --git a/target/linux/x86/patches-3.10/006-yenta_mistery.patch b/target/linux/x86/patches-3.10/006-yenta_mistery.patch
deleted file mode 100644
index 72144cb..0000000
--- a/target/linux/x86/patches-3.10/006-yenta_mistery.patch
+++ /dev/null
@@ -1,20 +0,0 @@
---- a/drivers/pcmcia/yenta_socket.c
-+++ b/drivers/pcmcia/yenta_socket.c
-@@ -1233,6 +1233,17 @@ static int yenta_probe(struct pci_dev *d
- 
- 	/* We must finish initialization here */
- 
-+#ifdef CONFIG_X86_RDC321X
-+/* #define YO_TI1510_DATASHEET_GUY_EXPLAIN_THIS_JUNK 0x0044f044 */
-+#define YO_TI1510_DATASHEET_GUY_EXPLAIN_THIS_JUNK 0x0844b060
-+/* #define YO_TI1510_DATASHEET_GUY_EXPLAIN_THIS_JUNK 0x0044d044 */
-+
-+	config_writel(socket, 32*4, YO_TI1510_DATASHEET_GUY_EXPLAIN_THIS_JUNK);
-+	config_writel(socket, 35*4, 0x00000022);
-+	config_writel(socket, 36*4, 0x60200000);
-+	config_writel(socket, 40*4, 0x7e020000);
-+#endif
-+
- 	if (!socket->cb_irq || request_irq(socket->cb_irq, yenta_interrupt, IRQF_SHARED, "yenta", socket)) {
- 		/* No IRQ or request_irq failed. Poll */
- 		socket->cb_irq = 0; /* But zero is a valid IRQ number. */
diff --git a/target/linux/x86/patches-3.10/009-rdc321x_select_embedded.patch b/target/linux/x86/patches-3.10/009-rdc321x_select_embedded.patch
deleted file mode 100644
index ab375e2..0000000
--- a/target/linux/x86/patches-3.10/009-rdc321x_select_embedded.patch
+++ /dev/null
@@ -1,11 +0,0 @@
---- a/arch/x86/Kconfig
-+++ b/arch/x86/Kconfig
-@@ -483,6 +483,8 @@ config X86_RDC321X
- 	depends on X86_EXTENDED_PLATFORM
- 	select M486
- 	select X86_REBOOTFIXUPS
-+	select EMBEDDED
-+	select ARCH_REQUIRE_GPIOLIB
- 	---help---
- 	  This option is needed for RDC R-321x system-on-chip, also known
- 	  as R-8610-(G).
diff --git a/target/linux/x86/patches-3.10/010-rdc_cpu_ident.patch b/target/linux/x86/patches-3.10/010-rdc_cpu_ident.patch
deleted file mode 100644
index 6f3eab3..0000000
--- a/target/linux/x86/patches-3.10/010-rdc_cpu_ident.patch
+++ /dev/null
@@ -1,176 +0,0 @@
---- /dev/null
-+++ b/Documentation/x86/rdc.txt
-@@ -0,0 +1,69 @@
-+
-+Introduction
-+============
-+
-+RDC (http://www.rdc.com.tw) have been manufacturing x86-compatible SoC
-+(system-on-chips) for a number of years.  They are not the fastest of
-+CPUs (clock speeds ranging from 133-150MHz) but 486SX compatibility
-+coupled with very low power consumption[1] and low cost make them ideal
-+for embedded applications.
-+
-+
-+Where to find
-+=============
-+
-+RDC chips show up in numerous embedded devices, but be careful since
-+many of them will not run Linux 2.6 without significant expertise.
-+
-+There are several variants of what the linux kernel refers to generically
-+as RDC321X:  R8610, R321x, S3282 and AMRISC20000.
-+
-+R321x: Found in various routers, see the OpenWrt project for details,
-+   http://wiki.openwrt.org/oldwiki/rdcport
-+
-+R8610: Found on the RDC evaluation board
-+   http://www.ivankuten.com/system-on-chip-soc/rdc-r8610/
-+
-+AMRISC20000: Found in the MGB-100 wireless hard disk
-+   http://tintuc.no-ip.com/linux/tipps/mgb100/
-+
-+S3282: Found in various NAS devices, including the Bifferboard
-+   http://www.bifferos.com
-+
-+
-+Kernel Configuration
-+====================
-+
-+Add support for this CPU with CONFIG_X86_RDC321X.  Ensure that maths
-+emulation is included (CONFIG_MATH_EMULATION selected) and avoid MCE
-+(CONFIG_X86_MCE not selected).
-+
-+
-+CPU detection
-+=============
-+
-+None of these chips support the cpuid instruction, so as with some
-+other x86 compatible SoCs, we must check the north bridge and look
-+for specific 'signature' PCI device config.
-+
-+The current detection code has been tested only on the Bifferboard
-+(S3282 CPU), please send bug reports or success stories with
-+other devices to bifferos@yahoo.co.uk.
-+
-+
-+Credits
-+=======
-+
-+Many thanks to RDC for providing the customer codes to allow
-+detection of all known variants, without which this detection code
-+would have been very hard to ascertain.
-+
-+
-+References
-+==========
-+
-+[1] S3282 in certain NAS solutions consumes less than 1W
-+
-+
-+mark@bifferos.com 2009
-+
---- a/arch/x86/Kconfig
-+++ b/arch/x86/Kconfig
-@@ -481,6 +481,7 @@ config X86_RDC321X
- 	bool "RDC R-321x SoC"
- 	depends on X86_32
- 	depends on X86_EXTENDED_PLATFORM
-+	select PCI
- 	select M486
- 	select X86_REBOOTFIXUPS
- 	select EMBEDDED
---- a/arch/x86/include/asm/processor.h
-+++ b/arch/x86/include/asm/processor.h
-@@ -137,7 +137,8 @@ struct cpuinfo_x86 {
- #define X86_VENDOR_CENTAUR	5
- #define X86_VENDOR_TRANSMETA	7
- #define X86_VENDOR_NSC		8
--#define X86_VENDOR_NUM		9
-+#define X86_VENDOR_RDC		9
-+#define X86_VENDOR_NUM		10
- 
- #define X86_VENDOR_UNKNOWN	0xff
- 
---- a/arch/x86/kernel/cpu/Makefile
-+++ b/arch/x86/kernel/cpu/Makefile
-@@ -26,6 +26,7 @@ obj-$(CONFIG_CPU_SUP_CYRIX_32)		+= cyrix
- obj-$(CONFIG_CPU_SUP_CENTAUR)		+= centaur.o
- obj-$(CONFIG_CPU_SUP_TRANSMETA_32)	+= transmeta.o
- obj-$(CONFIG_CPU_SUP_UMC_32)		+= umc.o
-+obj-$(CONFIG_X86_RDC321X)		+= rdc.o
- 
- obj-$(CONFIG_PERF_EVENTS)		+= perf_event.o
- 
---- /dev/null
-+++ b/arch/x86/kernel/cpu/rdc.c
-@@ -0,0 +1,69 @@
-+/*
-+ * See Documentation/x86/rdc.txt
-+ *
-+ * mark@bifferos.com
-+ */
-+
-+#include <linux/pci.h>
-+#include <asm/pci-direct.h>
-+#include "cpu.h"
-+
-+
-+static void __cpuinit rdc_identify(struct cpuinfo_x86 *c)
-+{
-+	u16 vendor, device;
-+	u32 customer_id;
-+
-+	if (!early_pci_allowed())
-+		return;
-+
-+	/* RDC CPU is SoC (system-on-chip), Northbridge is always present */
-+	vendor = read_pci_config_16(0, 0, 0, PCI_VENDOR_ID);
-+	device = read_pci_config_16(0, 0, 0, PCI_DEVICE_ID);
-+
-+	if (vendor != PCI_VENDOR_ID_RDC || device != PCI_DEVICE_ID_RDC_R6020)
-+		return;  /* not RDC */
-+	/*
-+	 * NB: We could go on and check other devices, e.g. r6040 NIC, but
-+	 * that's probably overkill
-+	 */
-+
-+	customer_id = read_pci_config(0, 0, 0, 0x90);
-+
-+	switch (customer_id) {
-+		/* id names are from RDC */
-+	case 0x00321000:
-+		strcpy(c->x86_model_id, "R3210/R3211");
-+		break;
-+	case 0x00321001:
-+		strcpy(c->x86_model_id, "AMITRISC20000/20010");
-+		break;
-+	case 0x00321002:
-+		strcpy(c->x86_model_id, "R3210X/Edimax");
-+		break;
-+	case 0x00321003:
-+		strcpy(c->x86_model_id, "R3210/Kcodes");
-+		break;
-+	case 0x00321004:  /* tested */
-+		strcpy(c->x86_model_id, "S3282/CodeTek");
-+		break;
-+	case 0x00321007:
-+		strcpy(c->x86_model_id, "R8610");
-+		break;
-+	default:
-+		pr_info("RDC CPU: Unrecognised Customer ID (0x%x) please report to linux-kernel@vger.kernel.org\n", customer_id);
-+		break;
-+	}
-+
-+	strcpy(c->x86_vendor_id, "RDC");
-+	c->x86_vendor = X86_VENDOR_RDC;
-+}
-+
-+static const struct cpu_dev __cpuinitconst rdc_cpu_dev = {
-+	.c_vendor	= "RDC",
-+	.c_ident	= { "RDC" },
-+	.c_identify	= rdc_identify,
-+	.c_x86_vendor	= X86_VENDOR_RDC,
-+};
-+
-+cpu_dev_register(rdc_cpu_dev);
diff --git a/target/linux/x86/patches-3.10/011-tune_lzma_options.patch b/target/linux/x86/patches-3.10/011-tune_lzma_options.patch
deleted file mode 100644
index 1421f7c..0000000
--- a/target/linux/x86/patches-3.10/011-tune_lzma_options.patch
+++ /dev/null
@@ -1,22 +0,0 @@
---- a/scripts/Makefile.lib
-+++ b/scripts/Makefile.lib
-@@ -303,7 +303,7 @@ cmd_bzip2 = (cat $(filter-out FORCE,$^)
- 
- quiet_cmd_lzma = LZMA    $@
- cmd_lzma = (cat $(filter-out FORCE,$^) | \
--	lzma e -d20 -lc1 -lp2 -pb2 -eos -si -so && $(call size_append, $(filter-out FORCE,$^))) > $@ || \
-+	lzma e -lc8 -eos -si -so && $(call size_append, $(filter-out FORCE,$^))) > $@ || \
- 	(rm -f $@ ; false)
- 
- quiet_cmd_lzo = LZO     $@
---- a/arch/x86/include/asm/boot.h
-+++ b/arch/x86/include/asm/boot.h
-@@ -23,7 +23,7 @@
- #error "Invalid value for CONFIG_PHYSICAL_ALIGN"
- #endif
- 
--#ifdef CONFIG_KERNEL_BZIP2
-+#if defined(CONFIG_KERNEL_BZIP2) || defined(CONFIG_KERNEL_LZMA)
- #define BOOT_HEAP_SIZE             0x400000
- #else /* !CONFIG_KERNEL_BZIP2 */
- 
diff --git a/target/linux/x86/patches-3.10/012-export_erase_write.patch b/target/linux/x86/patches-3.10/012-export_erase_write.patch
deleted file mode 100644
index d3ec5ca..0000000
--- a/target/linux/x86/patches-3.10/012-export_erase_write.patch
+++ /dev/null
@@ -1,23 +0,0 @@
---- a/drivers/mtd/mtdblock.c
-+++ b/drivers/mtd/mtdblock.c
-@@ -62,7 +62,7 @@ static void erase_callback(struct erase_
- 	wake_up(wait_q);
- }
- 
--static int erase_write (struct mtd_info *mtd, unsigned long pos,
-+int erase_write (struct mtd_info *mtd, unsigned long pos,
- 			int len, const char *buf)
- {
- 	struct erase_info erase;
---- a/include/linux/mtd/mtd.h
-+++ b/include/linux/mtd/mtd.h
-@@ -409,6 +409,9 @@ extern void register_mtd_user (struct mt
- extern int unregister_mtd_user (struct mtd_notifier *old);
- void *mtd_kmalloc_up_to(const struct mtd_info *mtd, size_t *size);
- 
-+int erase_write (struct mtd_info *mtd, unsigned long pos,
-+		 int len, const char *buf);
-+
- void mtd_erase_callback(struct erase_info *instr);
- 
- static inline int mtd_is_bitflip(int err) {
diff --git a/target/linux/x86/patches-3.10/100-rdc_boards.patch b/target/linux/x86/patches-3.10/100-rdc_boards.patch
deleted file mode 100644
index 3712cb8..0000000
--- a/target/linux/x86/patches-3.10/100-rdc_boards.patch
+++ /dev/null
@@ -1,745 +0,0 @@
---- a/arch/x86/Makefile
-+++ b/arch/x86/Makefile
-@@ -174,6 +174,9 @@ libs-y  += arch/x86/lib/
- # See arch/x86/Kbuild for content of core part of the kernel
- core-y += arch/x86/
- 
-+# RDC R-321X support
-+core-$(CONFIG_X86_RDC321X)   += arch/x86/mach-rdc321x/
-+
- # drivers-y are linked after core-y
- drivers-$(CONFIG_MATH_EMULATION) += arch/x86/math-emu/
- drivers-$(CONFIG_PCI)            += arch/x86/pci/
---- /dev/null
-+++ b/arch/x86/mach-rdc321x/Makefile
-@@ -0,0 +1,5 @@
-+#
-+# Makefile for the RDC321x specific parts of the kernel
-+#
-+obj-$(CONFIG_X86_RDC321X)	:= platform.o reboot.o boards/sitecom.o boards/ar525w.o boards/bifferboard.o boards/r8610.o
-+
---- /dev/null
-+++ b/arch/x86/mach-rdc321x/platform.c
-@@ -0,0 +1,115 @@
-+/*
-+ *  Generic RDC321x platform devices
-+ *
-+ *  Copyright (C) 2007-2009 OpenWrt.org
-+ *  Copyright (C) 2007 Florian Fainelli <florian@openwrt.org>
-+ *  Copyright (C) 2008-2009 Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
-+ *
-+ *  This program is free software; you can redistribute it and/or
-+ *  modify it under the terms of the GNU General Public License
-+ *  as published by the Free Software Foundation; either version 2
-+ *  of the License, or (at your option) any later version.
-+ *
-+ *  This program is distributed in the hope that it will be useful,
-+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ *  GNU General Public License for more details.
-+ *
-+ *  You should have received a copy of the GNU General Public License
-+ *  along with this program; if not, write to the
-+ *  Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
-+ *  Boston, MA  02110-1301, USA.
-+ *
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/platform_device.h>
-+#include <linux/mtd/map.h>
-+#include <linux/mtd/mtd.h>
-+#include <linux/mtd/physmap.h>
-+#include <linux/root_dev.h>
-+
-+#include <asm/rdc_boards.h>
-+
-+static struct rdc_platform_data rdcplat_data;
-+
-+/* LEDS */
-+static struct platform_device rdc321x_leds = {
-+	.name = "leds-gpio",
-+	.id = -1,
-+	.dev = {
-+		.platform_data = &rdcplat_data.led_data,
-+	}
-+};
-+
-+/* Button */
-+static struct platform_device rdc321x_buttons = {
-+	.name = "gpio-keys-polled",
-+	.id = -1,
-+	.dev = {
-+		.platform_data = &rdcplat_data.button_data,
-+	}
-+};
-+
-+static __initdata struct platform_device *rdc321x_devs[] = {
-+	&rdc321x_leds,
-+	&rdc321x_buttons,
-+};
-+
-+const char *__initdata boards[] = {
-+	"Sitecom",
-+	"AR525W",
-+	"Bifferboard",
-+	"R8610",
-+	0
-+};
-+
-+static struct map_info rdc_map_info = {
-+	.name		= "rdc_flash",
-+	.size		= 0x800000,	/* 8MB */
-+	.phys		= 0xFF800000,	/* (u32) -rdc_map_info.size */
-+	.bankwidth	= 2,
-+};
-+
-+static int __init rdc_board_setup(void)
-+{
-+	struct mtd_info *mtdinfo;
-+	struct mtd_part_parser_data *ppdata;
-+	int res;
-+
-+	simple_map_init(&rdc_map_info);
-+
-+	while (1) {
-+		rdc_map_info.virt = ioremap(rdc_map_info.phys,
-+					    rdc_map_info.size);
-+		if (rdc_map_info.virt == NULL)
-+			continue;
-+
-+		mtdinfo = do_map_probe("cfi_probe", &rdc_map_info);
-+		if (mtdinfo == NULL)
-+			mtdinfo = do_map_probe("jedec_probe", &rdc_map_info);
-+		if (mtdinfo != NULL)
-+			break;
-+
-+		iounmap(rdc_map_info.virt);
-+		if ((rdc_map_info.size >>= 1) < 0x100000)	/* 1MB */
-+			panic("RDC321x: Could not find start of flash!");
-+		rdc_map_info.phys = (u32) -rdc_map_info.size;
-+	}
-+
-+	/*
-+	 * TODO: add a new field to mtd_part_parser_data, and use that
-+	 * instead of this ugly casting
-+	 */
-+	ppdata = (struct mtd_part_parser_data *) &rdcplat_data;
-+	res = mtd_device_parse_register(mtdinfo, boards, ppdata, NULL, 0);
-+	if (res) {
-+		panic("RDC321x: can't identify board type");
-+		return -ENOSYS;
-+	}
-+
-+	ROOT_DEV = 0;
-+
-+	return platform_add_devices(rdc321x_devs, ARRAY_SIZE(rdc321x_devs));
-+}
-+late_initcall(rdc_board_setup);
---- /dev/null
-+++ b/arch/x86/mach-rdc321x/boards/ar525w.c
-@@ -0,0 +1,251 @@
-+/*
-+ * ar525w RDC321x platform devices
-+ *
-+ *  Copyright (C) 2007-2009 OpenWrt.org
-+ *  Copyright (C) 2007 Florian Fainelli <florian@openwrt.org>
-+ *  Copyright (C) 2008-2009 Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
-+ *
-+ *  This program is free software; you can redistribute it and/or
-+ *  modify it under the terms of the GNU General Public License
-+ *  as published by the Free Software Foundation; either version 2
-+ *  of the License, or (at your option) any later version.
-+ *
-+ *  This program is distributed in the hope that it will be useful,
-+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ *  GNU General Public License for more details.
-+ *
-+ *  You should have received a copy of the GNU General Public License
-+ *  along with this program; if not, write to the
-+ *  Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
-+ *  Boston, MA  02110-1301, USA.
-+ *
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/mtd/physmap.h>
-+#include <linux/input.h>
-+#include <linux/vmalloc.h>
-+#include <linux/mtd/mtd.h>
-+#include <linux/slab.h>
-+
-+#include <asm/rdc_boards.h>
-+
-+struct image_header {
-+	char magic[4];              /* ASICII: GMTK */
-+	u32 checksum;               /* CRC32 */
-+	u32 version;                /* x.x.x.x */
-+	u32 kernelsz;               /* The size of the kernel image */
-+	u32 imagesz;                /* The length of this image file ( kernel + romfs + this header) */
-+	u32 pid;                    /* Product ID */
-+	u32 fastcksum;              /* Partial CRC32 on (First(256), medium(256), last(512)) */
-+	u32 reserved;
-+};
-+
-+static struct gpio_led ar525w_leds[] = {
-+	{ .name = "rdc321x:dmz", .gpio = 1, .active_low = 1},
-+};
-+static struct gpio_keys_button ar525w_btns[] = {
-+	{
-+		.gpio = 6,
-+		.code = BTN_0,
-+		.desc = "Reset",
-+		.active_low = 1,
-+	}
-+};
-+
-+static u32 __initdata crctab[257] = {
-+	0x00000000, 0x77073096, 0xee0e612c, 0x990951ba,
-+	0x076dc419, 0x706af48f, 0xe963a535, 0x9e6495a3,
-+	0x0edb8832, 0x79dcb8a4, 0xe0d5e91e, 0x97d2d988,
-+	0x09b64c2b, 0x7eb17cbd, 0xe7b82d07, 0x90bf1d91,
-+	0x1db71064, 0x6ab020f2, 0xf3b97148, 0x84be41de,
-+	0x1adad47d, 0x6ddde4eb, 0xf4d4b551, 0x83d385c7,
-+	0x136c9856, 0x646ba8c0, 0xfd62f97a, 0x8a65c9ec,
-+	0x14015c4f, 0x63066cd9, 0xfa0f3d63, 0x8d080df5,
-+	0x3b6e20c8, 0x4c69105e, 0xd56041e4, 0xa2677172,
-+	0x3c03e4d1, 0x4b04d447, 0xd20d85fd, 0xa50ab56b,
-+	0x35b5a8fa, 0x42b2986c, 0xdbbbc9d6, 0xacbcf940,
-+	0x32d86ce3, 0x45df5c75, 0xdcd60dcf, 0xabd13d59,
-+	0x26d930ac, 0x51de003a, 0xc8d75180, 0xbfd06116,
-+	0x21b4f4b5, 0x56b3c423, 0xcfba9599, 0xb8bda50f,
-+	0x2802b89e, 0x5f058808, 0xc60cd9b2, 0xb10be924,
-+	0x2f6f7c87, 0x58684c11, 0xc1611dab, 0xb6662d3d,
-+	0x76dc4190, 0x01db7106, 0x98d220bc, 0xefd5102a,
-+	0x71b18589, 0x06b6b51f, 0x9fbfe4a5, 0xe8b8d433,
-+	0x7807c9a2, 0x0f00f934, 0x9609a88e, 0xe10e9818,
-+	0x7f6a0dbb, 0x086d3d2d, 0x91646c97, 0xe6635c01,
-+	0x6b6b51f4, 0x1c6c6162, 0x856530d8, 0xf262004e,
-+	0x6c0695ed, 0x1b01a57b, 0x8208f4c1, 0xf50fc457,
-+	0x65b0d9c6, 0x12b7e950, 0x8bbeb8ea, 0xfcb9887c,
-+	0x62dd1ddf, 0x15da2d49, 0x8cd37cf3, 0xfbd44c65,
-+	0x4db26158, 0x3ab551ce, 0xa3bc0074, 0xd4bb30e2,
-+	0x4adfa541, 0x3dd895d7, 0xa4d1c46d, 0xd3d6f4fb,
-+	0x4369e96a, 0x346ed9fc, 0xad678846, 0xda60b8d0,
-+	0x44042d73, 0x33031de5, 0xaa0a4c5f, 0xdd0d7cc9,
-+	0x5005713c, 0x270241aa, 0xbe0b1010, 0xc90c2086,
-+	0x5768b525, 0x206f85b3, 0xb966d409, 0xce61e49f,
-+	0x5edef90e, 0x29d9c998, 0xb0d09822, 0xc7d7a8b4,
-+	0x59b33d17, 0x2eb40d81, 0xb7bd5c3b, 0xc0ba6cad,
-+	0xedb88320, 0x9abfb3b6, 0x03b6e20c, 0x74b1d29a,
-+	0xead54739, 0x9dd277af, 0x04db2615, 0x73dc1683,
-+	0xe3630b12, 0x94643b84, 0x0d6d6a3e, 0x7a6a5aa8,
-+	0xe40ecf0b, 0x9309ff9d, 0x0a00ae27, 0x7d079eb1,
-+	0xf00f9344, 0x8708a3d2, 0x1e01f268, 0x6906c2fe,
-+	0xf762575d, 0x806567cb, 0x196c3671, 0x6e6b06e7,
-+	0xfed41b76, 0x89d32be0, 0x10da7a5a, 0x67dd4acc,
-+	0xf9b9df6f, 0x8ebeeff9, 0x17b7be43, 0x60b08ed5,
-+	0xd6d6a3e8, 0xa1d1937e, 0x38d8c2c4, 0x4fdff252,
-+	0xd1bb67f1, 0xa6bc5767, 0x3fb506dd, 0x48b2364b,
-+	0xd80d2bda, 0xaf0a1b4c, 0x36034af6, 0x41047a60,
-+	0xdf60efc3, 0xa867df55, 0x316e8eef, 0x4669be79,
-+	0xcb61b38c, 0xbc66831a, 0x256fd2a0, 0x5268e236,
-+	0xcc0c7795, 0xbb0b4703, 0x220216b9, 0x5505262f,
-+	0xc5ba3bbe, 0xb2bd0b28, 0x2bb45a92, 0x5cb36a04,
-+	0xc2d7ffa7, 0xb5d0cf31, 0x2cd99e8b, 0x5bdeae1d,
-+	0x9b64c2b0, 0xec63f226, 0x756aa39c, 0x026d930a,
-+	0x9c0906a9, 0xeb0e363f, 0x72076785, 0x05005713,
-+	0x95bf4a82, 0xe2b87a14, 0x7bb12bae, 0x0cb61b38,
-+	0x92d28e9b, 0xe5d5be0d, 0x7cdcefb7, 0x0bdbdf21,
-+	0x86d3d2d4, 0xf1d4e242, 0x68ddb3f8, 0x1fda836e,
-+	0x81be16cd, 0xf6b9265b, 0x6fb077e1, 0x18b74777,
-+	0x88085ae6, 0xff0f6a70, 0x66063bca, 0x11010b5c,
-+	0x8f659eff, 0xf862ae69, 0x616bffd3, 0x166ccf45,
-+	0xa00ae278, 0xd70dd2ee, 0x4e048354, 0x3903b3c2,
-+	0xa7672661, 0xd06016f7, 0x4969474d, 0x3e6e77db,
-+	0xaed16a4a, 0xd9d65adc, 0x40df0b66, 0x37d83bf0,
-+	0xa9bcae53, 0xdebb9ec5, 0x47b2cf7f, 0x30b5ffe9,
-+	0xbdbdf21c, 0xcabac28a, 0x53b39330, 0x24b4a3a6,
-+	0xbad03605, 0xcdd70693, 0x54de5729, 0x23d967bf,
-+	0xb3667a2e, 0xc4614ab8, 0x5d681b02, 0x2a6f2b94,
-+	0xb40bbe37, 0xc30c8ea1, 0x5a05df1b, 0x2d02ef8d,
-+	0
-+};
-+
-+static u32 __init crc32(u8 * buf, u32 len)
-+{
-+	register int i;
-+	u32 sum;
-+	register u32 s0;
-+	s0 = ~0;
-+	for (i = 0; i < len; i++) {
-+		s0 = (s0 >> 8) ^ crctab[(u8) (s0 & 0xFF) ^ buf[i]];
-+	}
-+	sum = ~s0;
-+	return sum;
-+}
-+
-+static int __init fixup_ar525w_header(struct mtd_info *master, struct image_header *header)
-+{
-+	char *buffer;
-+	int res;
-+	u32 bufferlength = header->kernelsz + sizeof(struct image_header);
-+	u32 len;
-+	static char crcbuf[0x400];
-+
-+	printk(KERN_INFO "Fixing up AR525W header, old image size: %u, new image size: %u\n",
-+		   header->imagesz, bufferlength);
-+
-+	buffer = vmalloc(bufferlength);
-+	if (!buffer) {
-+		printk(KERN_ERR "Can't allocate %u bytes\n", bufferlength);
-+		return -ENOMEM;
-+	}
-+
-+	res =  mtd_read(master, 0x0, bufferlength, &len, buffer);
-+	if (res || len != bufferlength)
-+		goto out;
-+
-+	header = (struct image_header *) buffer;
-+	header->imagesz = bufferlength;
-+	header->checksum = 0;
-+	header->fastcksum = 0;
-+
-+	memcpy(crcbuf, buffer, 0x100);
-+	memcpy(crcbuf + 0x100, buffer + (bufferlength >> 1) - ((bufferlength & 0x6) >> 1), 0x100);
-+	memcpy(crcbuf + 0x200, buffer + bufferlength - 0x200, 0x200);
-+
-+	header->fastcksum = crc32(crcbuf, sizeof(crcbuf));
-+	header->checksum = crc32(buffer, bufferlength);
-+
-+	res = mtd_unlock(master, 0, master->erasesize);
-+	if (res != 0 && res != -EOPNOTSUPP) {
-+		printk(KERN_ERR "Can't unlock image header\n");
-+		goto out;
-+	}
-+
-+	res = erase_write (master, 0, master->erasesize, buffer);
-+	if (res)
-+		printk(KERN_ERR "Can't rewrite image header\n");
-+
-+out:
-+	vfree(buffer);
-+	return res;
-+}
-+
-+static int __init
-+parse_ar525w_partitions(struct mtd_info *master, struct mtd_partition **pparts,
-+			struct mtd_part_parser_data *plat_data)
-+{
-+	struct image_header header;
-+	int res;
-+	size_t len;
-+	struct mtd_partition *rdc_flash_parts;
-+	struct rdc_platform_data *pdata = (struct rdc_platform_data *) plat_data;
-+
-+	if (master->size != 0x400000) //4MB
-+		return -ENOSYS;
-+
-+	res =  mtd_read(master, 0x0, sizeof(header), &len, (char *)&header);
-+	if (res)
-+		return res;
-+
-+	if (strncmp(header.magic, "GMTK", 4))
-+		return -ENOSYS;
-+
-+	if (header.kernelsz > 0x400000 || header.kernelsz < master->erasesize) {
-+		printk(KERN_ERR "AR525W image header found, but seems corrupt, kernel size %u\n", header.kernelsz);
-+		return -EINVAL;
-+	}
-+
-+	if (header.kernelsz + sizeof(header) != header.imagesz) {
-+		res = fixup_ar525w_header(master, &header);
-+		if (res)
-+			return res;
-+	}
-+
-+	rdc_flash_parts = kzalloc(sizeof(struct mtd_partition) * 3, GFP_KERNEL);
-+
-+	rdc_flash_parts[0].name = "firmware";
-+	rdc_flash_parts[0].offset = 0x0;
-+	rdc_flash_parts[0].size = 0x3E0000;
-+	rdc_flash_parts[1].name = "rootfs";
-+	rdc_flash_parts[1].offset = header.kernelsz + sizeof(header);
-+	rdc_flash_parts[1].size = rdc_flash_parts[0].size - rdc_flash_parts[1].offset;
-+	rdc_flash_parts[2].name = "bootloader";
-+	rdc_flash_parts[2].offset = 0x3E0000;
-+	rdc_flash_parts[2].size = 0x20000;
-+
-+	*pparts = rdc_flash_parts;
-+
-+	pdata->led_data.num_leds = ARRAY_SIZE(ar525w_leds);
-+	pdata->led_data.leds = ar525w_leds;
-+	pdata->button_data.nbuttons = ARRAY_SIZE(ar525w_btns);
-+	pdata->button_data.buttons = ar525w_btns;
-+
-+	return 3;
-+}
-+
-+static struct mtd_part_parser __initdata ar525w_parser = {
-+	.owner = THIS_MODULE,
-+	.parse_fn = parse_ar525w_partitions,
-+	.name = "AR525W",
-+};
-+
-+static int __init ar525w_setup(void)
-+{
-+	return register_mtd_parser(&ar525w_parser);
-+}
-+
-+arch_initcall(ar525w_setup);
---- /dev/null
-+++ b/arch/x86/mach-rdc321x/boards/bifferboard.c
-@@ -0,0 +1,74 @@
-+/*
-+ *  Bifferboard RDC321x platform devices
-+ *
-+ *  Copyright (C) 2010 bifferos@yahoo.co.uk
-+ *
-+ *  This program is free software; you can redistribute it and/or
-+ *  modify it under the terms of the GNU General Public License
-+ *  as published by the Free Software Foundation; either version 2
-+ *  of the License, or (at your option) any later version.
-+ *
-+ *  This program is distributed in the hope that it will be useful,
-+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ *  GNU General Public License for more details.
-+ *
-+ *  You should have received a copy of the GNU General Public License
-+ *  along with this program; if not, write to the
-+ *  Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
-+ *  Boston, MA  02110-1301, USA.
-+ *
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/mtd/physmap.h>
-+#include <linux/input.h>
-+#include <linux/slab.h>
-+
-+#include <asm/rdc_boards.h>
-+
-+static int __init
-+parse_bifferboard_partitions(struct mtd_info *master,
-+			     struct mtd_partition **pparts,
-+			     struct mtd_part_parser_data *plat_data)
-+{
-+	int res;
-+	size_t len;
-+	struct mtd_partition *rdc_flash_parts;
-+	u32 kernel_len;
-+	u16 tmp;
-+
-+	res =  mtd_read(master, 0x4000 + 1036, 2, &len, (char *) &tmp);
-+	if (res)
-+		return res;
-+	kernel_len = tmp * master->erasesize;
-+
-+	rdc_flash_parts = kzalloc(sizeof(struct mtd_partition) * 3, GFP_KERNEL);
-+
-+	*pparts = rdc_flash_parts;
-+
-+	rdc_flash_parts[0].name = "kernel";
-+	rdc_flash_parts[0].offset = 0;
-+	rdc_flash_parts[0].size = kernel_len;
-+	rdc_flash_parts[1].name = "rootfs";
-+	rdc_flash_parts[1].offset = kernel_len;
-+	rdc_flash_parts[1].size = master->size - kernel_len - 0x10000;
-+	rdc_flash_parts[2].name = "biffboot";
-+	rdc_flash_parts[2].offset = master->size - 0x10000;
-+	rdc_flash_parts[2].size = 0x10000;
-+
-+	return 3;
-+}
-+
-+struct mtd_part_parser __initdata bifferboard_parser = {
-+	.owner = THIS_MODULE,
-+	.parse_fn = parse_bifferboard_partitions,
-+	.name = "Bifferboard",
-+};
-+
-+static int __init bifferboard_setup(void)
-+{
-+	return register_mtd_parser(&bifferboard_parser);
-+}
-+arch_initcall(bifferboard_setup);
---- /dev/null
-+++ b/arch/x86/mach-rdc321x/boards/r8610.c
-@@ -0,0 +1,69 @@
-+/*
-+ *  R8610 RDC321x platform devices
-+ *
-+ *  Copyright (C) 2009, Florian Fainelli <florian@openwrt.org>
-+ *
-+ *  This program is free software; you can redistribute it and/or
-+ *  modify it under the terms of the GNU General Public License
-+ *  as published by the Free Software Foundation; either version 2
-+ *  of the License, or (at your option) any later version.
-+ *
-+ *  This program is distributed in the hope that it will be useful,
-+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ *  GNU General Public License for more details.
-+ *
-+ *  You should have received a copy of the GNU General Public License
-+ *  along with this program; if not, write to the
-+ *  Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
-+ *  Boston, MA  02110-1301, USA.
-+ *
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/mtd/physmap.h>
-+#include <linux/input.h>
-+#include <linux/slab.h>
-+
-+#include <asm/rdc_boards.h>
-+
-+static int __init
-+parse_r8610_partitions(struct mtd_info *master, struct mtd_partition **pparts,
-+		       struct mtd_part_parser_data *plat_data)
-+{
-+	struct mtd_partition *rdc_flash_parts;
-+
-+	rdc_flash_parts = kzalloc(sizeof(struct mtd_partition) * 4, GFP_KERNEL);
-+
-+	*pparts = rdc_flash_parts;
-+
-+	rdc_flash_parts[0].name = "kernel";
-+	rdc_flash_parts[0].size = 0x001f0000;
-+	rdc_flash_parts[0].offset = 0;
-+	rdc_flash_parts[1].name = "config";
-+	rdc_flash_parts[1].size = 0x10000;
-+	rdc_flash_parts[1].offset = MTDPART_OFS_APPEND;
-+	rdc_flash_parts[2].name = "rootfs";
-+	rdc_flash_parts[2].size = 0x1E0000;
-+	rdc_flash_parts[2].offset = MTDPART_OFS_APPEND;
-+	rdc_flash_parts[3].name = "redboot";
-+	rdc_flash_parts[3].size = 0x20000;
-+	rdc_flash_parts[3].offset = MTDPART_OFS_APPEND;
-+	rdc_flash_parts[3].mask_flags = MTD_WRITEABLE;
-+
-+	return 4;
-+}
-+
-+struct mtd_part_parser __initdata r8610_parser = {
-+	.owner = THIS_MODULE,
-+	.parse_fn = parse_r8610_partitions,
-+	.name = "R8610",
-+};
-+
-+static int __init r8610_setup(void)
-+{
-+	return register_mtd_parser(&r8610_parser);
-+}
-+
-+arch_initcall(r8610_setup);
---- /dev/null
-+++ b/arch/x86/mach-rdc321x/boards/sitecom.c
-@@ -0,0 +1,115 @@
-+/*
-+ *  Sitecom RDC321x platform devices
-+ *
-+ *  Copyright (C) 2007-2009 OpenWrt.org
-+ *  Copyright (C) 2007 Florian Fainelli <florian@openwrt.org>
-+ *  Copyright (C) 2008-2009 Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
-+ *
-+ *  This program is free software; you can redistribute it and/or
-+ *  modify it under the terms of the GNU General Public License
-+ *  as published by the Free Software Foundation; either version 2
-+ *  of the License, or (at your option) any later version.
-+ *
-+ *  This program is distributed in the hope that it will be useful,
-+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ *  GNU General Public License for more details.
-+ *
-+ *  You should have received a copy of the GNU General Public License
-+ *  along with this program; if not, write to the
-+ *  Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
-+ *  Boston, MA  02110-1301, USA.
-+ *
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/mtd/physmap.h>
-+#include <linux/input.h>
-+#include <linux/slab.h>
-+
-+#include <asm/rdc_boards.h>
-+
-+struct image_header {
-+	char	magic[4];
-+	u32	kernel_length;
-+	u32	ramdisk_length;
-+	char	magic2[4];
-+	u32	kernel_length2;
-+};
-+
-+static struct gpio_led sitecom_leds[] = {
-+	{ .name = "rdc321x:power", .gpio = 15, .active_low = 1},
-+	{ .name = "rdc321x:usb0", .gpio = 0, .active_low = 1},
-+	{ .name = "rdc321x:usb1", .gpio = 1, .active_low = 1},
-+};
-+
-+static struct gpio_keys_button sitecom_btns[] = {
-+	{
-+		.gpio = 6,
-+		.code = BTN_0,
-+		.desc = "Reset",
-+		.active_low = 1,
-+	}
-+};
-+
-+static int __init
-+parse_sitecom_partitions(struct mtd_info *master, struct mtd_partition **pparts,
-+			 struct mtd_part_parser_data *plat_data)
-+{
-+	struct image_header header;
-+	int res;
-+	size_t len;
-+	struct mtd_partition *rdc_flash_parts;
-+	struct rdc_platform_data *pdata = (struct rdc_platform_data *) plat_data;
-+
-+	if (master->size != 0x400000) /* 4MB */
-+		return -ENOSYS;
-+
-+	res =  mtd_read(master, 0x8000, sizeof(header), &len, (char *)&header);
-+	if (res)
-+		return res;
-+
-+	if (strncmp(header.magic, "CSYS", 4) || strncmp(header.magic2, "WRRM", 4))
-+		return -ENOSYS;
-+
-+	rdc_flash_parts = kzalloc(sizeof(struct mtd_partition) * 5, GFP_KERNEL);
-+
-+	rdc_flash_parts[0].name = "firmware";
-+	rdc_flash_parts[0].offset = 0x8000;
-+	rdc_flash_parts[0].size = 0x3F0000 - 0x8000;
-+	rdc_flash_parts[1].name = "config";
-+	rdc_flash_parts[1].offset = 0;
-+	rdc_flash_parts[1].size = 0x8000;
-+	rdc_flash_parts[2].name = "kernel";
-+	rdc_flash_parts[2].offset = 0x8014;
-+	rdc_flash_parts[2].size = header.kernel_length;
-+	rdc_flash_parts[3].name = "rootfs";
-+	rdc_flash_parts[3].offset = 0x8014 + header.kernel_length;
-+	rdc_flash_parts[3].size = 0x3F0000 - rdc_flash_parts[3].offset;
-+	rdc_flash_parts[4].name = "bootloader";
-+	rdc_flash_parts[4].offset = 0x3F0000;
-+	rdc_flash_parts[4].size = 0x10000;
-+
-+	*pparts = rdc_flash_parts;
-+
-+	pdata->led_data.num_leds = ARRAY_SIZE(sitecom_leds);
-+	pdata->led_data.leds = sitecom_leds;
-+	pdata->button_data.nbuttons = ARRAY_SIZE(sitecom_btns);
-+	pdata->button_data.buttons = sitecom_btns;
-+
-+	return 5;
-+}
-+
-+struct mtd_part_parser __initdata sitecom_parser = {
-+	.owner = THIS_MODULE,
-+	.parse_fn = parse_sitecom_partitions,
-+	.name = "Sitecom",
-+};
-+
-+static int __init sitecom_setup(void)
-+{
-+	return register_mtd_parser(&sitecom_parser);
-+}
-+
-+arch_initcall(sitecom_setup);
---- /dev/null
-+++ b/arch/x86/mach-rdc321x/reboot.c
-@@ -0,0 +1,44 @@
-+/*
-+ *  This program is free software; you can redistribute it and/or
-+ *  modify it under the terms of the GNU General Public License
-+ *  as published by the Free Software Foundation; either version 2
-+ *  of the License, or (at your option) any later version.
-+ *
-+ *  This program is distributed in the hope that it will be useful,
-+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ *  GNU General Public License for more details.
-+ *
-+ *  You should have received a copy of the GNU General Public License
-+ *  along with this program; if not, write to the
-+ *  Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
-+ *  Boston, MA  02110-1301, USA.
-+ *
-+ */
-+
-+#include <asm/reboot.h>
-+#include <asm/io.h>
-+
-+static void rdc321x_reset(void)
-+{
-+	unsigned i;
-+
-+	/* write to southbridge config register 0x41
-+	   enable pci reset on cpu reset, make internal port 0x92 writeable
-+	   and switch port 0x92 to internal */
-+	outl(0x80003840, 0xCF8);
-+	i = inl(0xCFC);
-+	i |= 0x1600;
-+	outl(i, 0xCFC);
-+
-+	/* soft reset */
-+	outb(1, 0x92);
-+}
-+
-+static int __init rdc_setup_reset(void)
-+{
-+	machine_ops.emergency_restart = rdc321x_reset;
-+	return 0;
-+}
-+
-+arch_initcall(rdc_setup_reset);
---- /dev/null
-+++ b/arch/x86/include/asm/rdc_boards.h
-@@ -0,0 +1,36 @@
-+/*
-+ *  RDC321x boards
-+ *
-+ *  Copyright (C) 2007-2009 OpenWrt.org
-+ *  Copyright (C) 2007 Florian Fainelli <florian@openwrt.org>
-+ *  Copyright (C) 2008-2009 Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
-+ *
-+ *  This program is free software; you can redistribute it and/or
-+ *  modify it under the terms of the GNU General Public License
-+ *  as published by the Free Software Foundation; either version 2
-+ *  of the License, or (at your option) any later version.
-+ *
-+ *  This program is distributed in the hope that it will be useful,
-+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ *  GNU General Public License for more details.
-+ *
-+ *  You should have received a copy of the GNU General Public License
-+ *  along with this program; if not, write to the
-+ *  Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
-+ *  Boston, MA  02110-1301, USA.
-+ *
-+ */
-+
-+#ifndef _RDC_BOARDS_H__
-+#define _RDC_BOARDS_H__
-+
-+#include <linux/leds.h>
-+#include <linux/gpio_keys.h>
-+
-+struct rdc_platform_data {
-+	struct gpio_led_platform_data led_data;
-+	struct gpio_keys_platform_data button_data;
-+};
-+
-+#endif
diff --git a/target/linux/x86/patches-3.10/120-panic_on_unrecovered_nmi.patch b/target/linux/x86/patches-3.10/120-panic_on_unrecovered_nmi.patch
deleted file mode 100644
index 641bb38..0000000
--- a/target/linux/x86/patches-3.10/120-panic_on_unrecovered_nmi.patch
+++ /dev/null
@@ -1,11 +0,0 @@
---- a/drivers/mfd/rdc321x-southbridge.c
-+++ b/drivers/mfd/rdc321x-southbridge.c
-@@ -86,6 +86,8 @@ static int rdc321x_sb_probe(struct pci_d
- 	rdc321x_gpio_pdata.sb_pdev = pdev;
- 	rdc321x_wdt_pdata.sb_pdev = pdev;
- 
-+	panic_on_unrecovered_nmi = 1;
-+
- 	return mfd_add_devices(&pdev->dev, -1,
- 			       rdc321x_sb_cells, ARRAY_SIZE(rdc321x_sb_cells),
- 			       NULL, 0, NULL);
diff --git a/target/linux/x86/patches-3.10/150-pit-tick-rate.patch b/target/linux/x86/patches-3.10/150-pit-tick-rate.patch
deleted file mode 100644
index 7bf9bbd..0000000
--- a/target/linux/x86/patches-3.10/150-pit-tick-rate.patch
+++ /dev/null
@@ -1,13 +0,0 @@
---- a/include/linux/timex.h
-+++ b/include/linux/timex.h
-@@ -144,6 +144,10 @@ int read_current_timer(unsigned long *ti
- void ntp_notify_cmos_timer(void);
- 
- /* The clock frequency of the i8253/i8254 PIT */
-+#ifdef CONFIG_X86_RDC321X
-+#define PIT_TICK_RATE 1041816ul
-+#else
- #define PIT_TICK_RATE 1193182ul
-+#endif
- 
- #endif /* LINUX_TIMEX_H */
diff --git a/target/linux/x86/patches-3.10/160-kexec-fix.patch b/target/linux/x86/patches-3.10/160-kexec-fix.patch
deleted file mode 100644
index ea32494..0000000
--- a/target/linux/x86/patches-3.10/160-kexec-fix.patch
+++ /dev/null
@@ -1,43 +0,0 @@
-From 357954613bdbab0c1f3986589ff30cc4855a2efd Mon Sep 17 00:00:00 2001
-From: root <root@cent.localnet>
-Date: Sun, 6 Dec 2009 18:26:43 +0000
-Subject: [PATCH 03/14] kexec fix
-
----
- arch/x86/kernel/relocate_kernel_32.S |    6 ++++++
- 1 files changed, 6 insertions(+), 0 deletions(-)
-
---- a/arch/x86/kernel/relocate_kernel_32.S
-+++ b/arch/x86/kernel/relocate_kernel_32.S
-@@ -54,8 +54,10 @@ relocate_kernel:
- 	movl	%eax, CR0(%edi)
- 	movl	%cr3, %eax
- 	movl	%eax, CR3(%edi)
-+#ifndef CONFIG_X86_RDC321X
- 	movl	%cr4, %eax
- 	movl	%eax, CR4(%edi)
-+#endif
- 
- 	/* read the arguments and say goodbye to the stack */
- 	movl  20+4(%esp), %ebx /* page_list */
-@@ -124,7 +126,9 @@ identity_mapped:
- 	 * Setting everything to zero seems safe.
- 	 */
- 	xorl	%eax, %eax
-+#ifndef CONFIG_X86_RDC321X
- 	movl	%eax, %cr4
-+#endif
- 
- 	jmp 1f
- 1:
-@@ -195,8 +199,10 @@ identity_mapped:
- 	ret
- 
- virtual_mapped:
-+#ifndef CONFIG_X86_RDC321X
- 	movl	CR4(%edi), %eax
- 	movl	%eax, %cr4
-+#endif
- 	movl	CR3(%edi), %eax
- 	movl	%eax, %cr3
- 	movl	CR0(%edi), %eax
diff --git a/target/linux/x86/patches-3.3/001-alix_platform.patch b/target/linux/x86/patches-3.3/001-alix_platform.patch
deleted file mode 100644
index 4a5f4f4..0000000
--- a/target/linux/x86/patches-3.3/001-alix_platform.patch
+++ /dev/null
@@ -1,131 +0,0 @@
-index dc5f1d3..a24bf8c 100644
---- a/arch/x86/platform/geode/alix.c
-+++ b/arch/x86/platform/geode/alix.c
-@@ -6,6 +6,7 @@
-  *
-  * Copyright (C) 2008 Constantin Baranov <const@mimas.ru>
-  * Copyright (C) 2011 Ed Wildgoose <kernel@wildgooses.com>
-+ *                and Philip Prindeville <philipp@redfish-solutions.com>
-  *
-  * TODO: There are large similarities with leds-net5501.c
-  * by Alessandro Zummo <a.zummo@towertech.it>
-@@ -24,14 +25,47 @@
- #include <linux/leds.h>
- #include <linux/platform_device.h>
- #include <linux/gpio.h>
-+#include <linux/input.h>
-+#include <linux/gpio_keys.h>
-+#include <linux/dmi.h>
- 
- #include <asm/geode.h>
- 
-+#define BIOS_SIGNATURE_TINYBIOS		0xf0000
-+#define BIOS_SIGNATURE_COREBOOT		0x500
-+#define BIOS_REGION_SIZE		0x10000
-+
- static bool force = 0;
- module_param(force, bool, 0444);
- /* FIXME: Award bios is not automatically detected as Alix platform */
- MODULE_PARM_DESC(force, "Force detection as ALIX.2/ALIX.3 platform");
- 
-+static struct gpio_keys_button alix_gpio_buttons[] = {
-+	{
-+		.code = KEY_RESTART,
-+		.gpio = 24,
-+		.active_low = 1,
-+		.desc = "Reset button",
-+		.type = EV_KEY,
-+		.wakeup = 0,
-+		.debounce_interval = 100,
-+		.can_disable = 0,
-+	}
-+};
-+static struct gpio_keys_platform_data alix_buttons_data = {
-+	.buttons = alix_gpio_buttons,
-+	.nbuttons = ARRAY_SIZE(alix_gpio_buttons),
-+	.poll_interval = 20,
-+};
-+
-+static struct platform_device alix_buttons_dev = {
-+	.name = "gpio-keys-polled",
-+	.id = 1,
-+	.dev = {
-+		.platform_data = &alix_buttons_data,
-+	}
-+};
-+
- static struct gpio_led alix_leds[] = {
- 	{
- 		.name = "alix:1",
-@@ -64,17 +98,22 @@ static struct platform_device alix_leds_
- 	.dev.platform_data = &alix_leds_data,
- };
- 
-+static struct __initdata platform_device *alix_devs[] = {
-+	&alix_buttons_dev,
-+	&alix_leds_dev,
-+};
-+
- static void __init register_alix(void)
- {
- 	/* Setup LED control through leds-gpio driver */
--	platform_device_register(&alix_leds_dev);
-+	platform_add_devices(alix_devs, ARRAY_SIZE(alix_devs));
- }
- 
- static int __init alix_present(unsigned long bios_phys,
- 				const char *alix_sig,
- 				size_t alix_sig_len)
- {
--	const size_t bios_len = 0x00010000;
-+	const size_t bios_len = BIOS_REGION_SIZE;
- 	const char *bios_virt;
- 	const char *scan_end;
- 	const char *p;
-@@ -109,7 +148,8 @@ static int __init alix_present(unsigned
- 			*a = '\0';
- 
- 		tail = p + alix_sig_len;
--		if ((tail[0] == '2' || tail[0] == '3')) {
-+		if ((tail[0] == '2' || tail[0] == '3' || tail[0] == '6')) {
-+
- 			printk(KERN_INFO
- 			       "%s: system is recognized as \"%s\"\n",
- 			       KBUILD_MODNAME, name);
-@@ -120,6 +160,24 @@ static int __init alix_present(unsigned
- 	return 0;
- }
- 
-+static bool __init alix_present_dmi(void)
-+{
-+	const char *vendor, *product;
-+
-+	vendor = dmi_get_system_info(DMI_SYS_VENDOR);
-+	if (!vendor || strcmp(vendor, "PC Engines"))
-+		return false;
-+
-+	product = dmi_get_system_info(DMI_PRODUCT_NAME);
-+	if (!product || (strcmp(product, "ALIX.2D") && strcmp(product, "ALIX.6")))
-+		return false;
-+
-+	printk(KERN_INFO "%s: system is recognized as \"%s %s\"\n",
-+	       KBUILD_MODNAME, vendor, product);
-+
-+	return true;
-+}
-+
- static int __init alix_init(void)
- {
- 	const char tinybios_sig[] = "PC Engines ALIX.";
-@@ -128,8 +186,9 @@ static int __init alix_init(void)
- 	if (!is_geode())
- 		return 0;
- 
--	if (alix_present(0xf0000, tinybios_sig, sizeof(tinybios_sig) - 1) ||
--	    alix_present(0x500, coreboot_sig, sizeof(coreboot_sig) - 1))
-+	if (alix_present(BIOS_SIGNATURE_TINYBIOS, tinybios_sig, sizeof(tinybios_sig) - 1) ||
-+	    alix_present(BIOS_SIGNATURE_COREBOOT, coreboot_sig, sizeof(coreboot_sig) - 1) ||
-+	    alix_present_dmi())
- 		register_alix();
- 
- 	return 0;
diff --git a/target/linux/x86/patches-3.3/002-geos_platform.patch b/target/linux/x86/patches-3.3/002-geos_platform.patch
deleted file mode 100644
index 50d8bb2..0000000
--- a/target/linux/x86/patches-3.3/002-geos_platform.patch
+++ /dev/null
@@ -1,178 +0,0 @@
-From 31bc84d45320dad2392384381ad4d818ab21087a Mon Sep 17 00:00:00 2001
-From: "Philip A. Prindeville" <philipp@redfish-solutions.com>
-Date: Wed, 18 Jan 2012 11:15:33 -0700
-Subject: [PATCH 1/1] geos: Platform driver for Geos and Geos2 single-board
- computers.
-
-Trivial platform driver for Traverse Technologies Geos and Geos2
-single-board computers. Uses SMBIOS to identify platform.
-Based on progressive revisions of the leds-net5501 driver that
-was rewritten by Ed Wildgoose as a platform driver.
-
-Supports GPIO-based LEDs (3) and 1 polled button which is
-typically used for a soft reset.
-
-Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
-Reviewed-by: Ed Wildgoose <ed@wildgooses.com>
-Acked-by: Andres Salomon <dilinger@queued.net>
-Cc: Richard Purdie <rpurdie@rpsys.net>
-Cc: Andrew Morton <akpm@linux-foundation.org>
----
- arch/x86/Kconfig                 |    7 ++
- arch/x86/platform/geode/Makefile |    1 +
- arch/x86/platform/geode/geos.c   |  128 ++++++++++++++++++++++++++++++++++++++
- 3 files changed, 136 insertions(+), 0 deletions(-)
- create mode 100644 arch/x86/platform/geode/geos.c
-
---- a/arch/x86/Kconfig
-+++ b/arch/x86/Kconfig
-@@ -2133,6 +2133,13 @@ config ALIX
- 
- 	  Note: You have to set alix.force=1 for boards with Award BIOS.
- 
-+config GEOS
-+	bool "Traverse Technologies GEOS System Support (LEDS, GPIO, etc)"
-+	select GPIOLIB
-+	depends on DMI
-+	---help---
-+	  This option enables system support for the Traverse Technologies GEOS.
-+
- endif # X86_32
- 
- config AMD_NB
---- a/arch/x86/platform/geode/Makefile
-+++ b/arch/x86/platform/geode/Makefile
-@@ -1 +1,2 @@
- obj-$(CONFIG_ALIX)		+= alix.o
-+obj-$(CONFIG_GEOS)		+= geos.o
---- /dev/null
-+++ b/arch/x86/platform/geode/geos.c
-@@ -0,0 +1,128 @@
-+/*
-+ * System Specific setup for Traverse Technologies GEOS.
-+ * At the moment this means setup of GPIO control of LEDs.
-+ *
-+ * Copyright (C) 2008 Constantin Baranov <const@mimas.ru>
-+ * Copyright (C) 2011 Ed Wildgoose <kernel@wildgooses.com>
-+ *                and Philip Prindeville <philipp@redfish-solutions.com>
-+ *
-+ * TODO: There are large similarities with leds-net5501.c
-+ * by Alessandro Zummo <a.zummo@towertech.it>
-+ * In the future leds-net5501.c should be migrated over to platform
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2
-+ * as published by the Free Software Foundation.
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/io.h>
-+#include <linux/string.h>
-+#include <linux/module.h>
-+#include <linux/leds.h>
-+#include <linux/platform_device.h>
-+#include <linux/gpio.h>
-+#include <linux/input.h>
-+#include <linux/gpio_keys.h>
-+#include <linux/dmi.h>
-+
-+#include <asm/geode.h>
-+
-+static struct gpio_keys_button geos_gpio_buttons[] = {
-+	{
-+		.code = KEY_RESTART,
-+		.gpio = 3,
-+		.active_low = 1,
-+		.desc = "Reset button",
-+		.type = EV_KEY,
-+		.wakeup = 0,
-+		.debounce_interval = 100,
-+		.can_disable = 0,
-+	}
-+};
-+static struct gpio_keys_platform_data geos_buttons_data = {
-+	.buttons = geos_gpio_buttons,
-+	.nbuttons = ARRAY_SIZE(geos_gpio_buttons),
-+	.poll_interval = 20,
-+};
-+
-+static struct platform_device geos_buttons_dev = {
-+	.name = "gpio-keys-polled",
-+	.id = 1,
-+	.dev = {
-+		.platform_data = &geos_buttons_data,
-+	}
-+};
-+
-+static struct gpio_led geos_leds[] = {
-+	{
-+		.name = "geos:1",
-+		.gpio = 6,
-+		.default_trigger = "default-on",
-+		.active_low = 1,
-+	},
-+	{
-+		.name = "geos:2",
-+		.gpio = 25,
-+		.default_trigger = "default-off",
-+		.active_low = 1,
-+	},
-+	{
-+		.name = "geos:3",
-+		.gpio = 27,
-+		.default_trigger = "default-off",
-+		.active_low = 1,
-+	},
-+};
-+
-+static struct gpio_led_platform_data geos_leds_data = {
-+	.num_leds = ARRAY_SIZE(geos_leds),
-+	.leds = geos_leds,
-+};
-+
-+static struct platform_device geos_leds_dev = {
-+	.name = "leds-gpio",
-+	.id = -1,
-+	.dev.platform_data = &geos_leds_data,
-+};
-+
-+static struct __initdata platform_device *geos_devs[] = {
-+	&geos_buttons_dev,
-+	&geos_leds_dev,
-+};
-+
-+static void __init register_geos(void)
-+{
-+	/* Setup LED control through leds-gpio driver */
-+	platform_add_devices(geos_devs, ARRAY_SIZE(geos_devs));
-+}
-+
-+static int __init geos_init(void)
-+{
-+	const char *vendor, *product;
-+
-+	if (!is_geode())
-+		return 0;
-+
-+	vendor = dmi_get_system_info(DMI_SYS_VENDOR);
-+	if (!vendor || strcmp(vendor, "Traverse Technologies"))
-+		return 0;
-+
-+	product = dmi_get_system_info(DMI_PRODUCT_NAME);
-+	if (!product || strcmp(product, "Geos"))
-+		return 0;
-+
-+	printk(KERN_INFO "%s: system is recognized as \"%s %s\"\n",
-+	       KBUILD_MODNAME, vendor, product);
-+
-+	register_geos();
-+
-+	return 0;
-+}
-+
-+module_init(geos_init);
-+
-+MODULE_AUTHOR("Philip Prindeville <philipp@redfish-solutions.com>");
-+MODULE_DESCRIPTION("Traverse Technologies Geos System Setup");
-+MODULE_LICENSE("GPL");
diff --git a/target/linux/x86/patches-3.3/003-via-rhine-crash-fix.patch b/target/linux/x86/patches-3.3/003-via-rhine-crash-fix.patch
deleted file mode 100644
index 26bc380..0000000
--- a/target/linux/x86/patches-3.3/003-via-rhine-crash-fix.patch
+++ /dev/null
@@ -1,60 +0,0 @@
---- a/drivers/net/ethernet/via/via-rhine.c
-+++ b/drivers/net/ethernet/via/via-rhine.c
-@@ -689,9 +689,12 @@ static void __devinit rhine_reload_eepro
- #ifdef CONFIG_NET_POLL_CONTROLLER
- static void rhine_poll(struct net_device *dev)
- {
--	disable_irq(dev->irq);
--	rhine_interrupt(dev->irq, (void *)dev);
--	enable_irq(dev->irq);
-+	struct rhine_private *rp = netdev_priv(dev);
-+	const int irq = rp->pdev->irq;
-+
-+	disable_irq(irq);
-+	rhine_interrupt(irq, dev);
-+	enable_irq(irq);
- }
- #endif
-
-@@ -929,7 +932,6 @@ static int __devinit rhine_init_one(stru
- 	dev = alloc_etherdev(sizeof(struct rhine_private));
- 	if (!dev) {
- 		rc = -ENOMEM;
--		dev_err(&pdev->dev, "alloc_etherdev failed\n");
- 		goto err_out;
- 	}
- 	SET_NETDEV_DEV(dev, &pdev->dev);
-@@ -973,7 +975,6 @@ static int __devinit rhine_init_one(stru
- 	}
- #endif /* USE_MMIO */
-
--	dev->base_addr = (unsigned long)ioaddr;
- 	rp->base = ioaddr;
-
- 	/* Get chip registers into a sane state */
-@@ -996,8 +997,6 @@ static int __devinit rhine_init_one(stru
- 	if (!phy_id)
- 		phy_id = ioread8(ioaddr + 0x6C);
-
--	dev->irq = pdev->irq;
--
- 	spin_lock_init(&rp->lock);
- 	mutex_init(&rp->task_lock);
- 	INIT_WORK(&rp->reset_task, rhine_reset_task);
-@@ -1158,7 +1157,6 @@ static void alloc_rbufs(struct net_devic
- 		rp->rx_skbuff[i] = skb;
- 		if (skb == NULL)
- 			break;
--		skb->dev = dev;                 /* Mark as being used by this device. */
-
- 		rp->rx_skbuff_dma[i] =
- 			pci_map_single(rp->pdev, skb->data, rp->rx_buf_sz,
-@@ -1943,7 +1941,6 @@ static int rhine_rx(struct net_device *d
- 			rp->rx_skbuff[entry] = skb;
- 			if (skb == NULL)
- 				break;	/* Better luck next round. */
--			skb->dev = dev;	/* Mark as being used by this device. */
- 			rp->rx_skbuff_dma[entry] =
- 				pci_map_single(rp->pdev, skb->data,
- 					       rp->rx_buf_sz,
-
diff --git a/target/linux/x86/patches-3.3/006-yenta_mistery.patch b/target/linux/x86/patches-3.3/006-yenta_mistery.patch
deleted file mode 100644
index 65893ea..0000000
--- a/target/linux/x86/patches-3.3/006-yenta_mistery.patch
+++ /dev/null
@@ -1,20 +0,0 @@
---- a/drivers/pcmcia/yenta_socket.c
-+++ b/drivers/pcmcia/yenta_socket.c
-@@ -1233,6 +1233,17 @@ static int __devinit yenta_probe(struct
- 
- 	/* We must finish initialization here */
- 
-+#ifdef CONFIG_X86_RDC321X
-+/* #define YO_TI1510_DATASHEET_GUY_EXPLAIN_THIS_JUNK 0x0044f044 */
-+#define YO_TI1510_DATASHEET_GUY_EXPLAIN_THIS_JUNK 0x0844b060
-+/* #define YO_TI1510_DATASHEET_GUY_EXPLAIN_THIS_JUNK 0x0044d044 */
-+
-+	config_writel(socket, 32*4, YO_TI1510_DATASHEET_GUY_EXPLAIN_THIS_JUNK);
-+	config_writel(socket, 35*4, 0x00000022);
-+	config_writel(socket, 36*4, 0x60200000);
-+	config_writel(socket, 40*4, 0x7e020000);
-+#endif
-+
- 	if (!socket->cb_irq || request_irq(socket->cb_irq, yenta_interrupt, IRQF_SHARED, "yenta", socket)) {
- 		/* No IRQ or request_irq failed. Poll */
- 		socket->cb_irq = 0; /* But zero is a valid IRQ number. */
diff --git a/target/linux/x86/patches-3.3/009-rdc321x_select_embedded.patch b/target/linux/x86/patches-3.3/009-rdc321x_select_embedded.patch
deleted file mode 100644
index 2d094fc..0000000
--- a/target/linux/x86/patches-3.3/009-rdc321x_select_embedded.patch
+++ /dev/null
@@ -1,11 +0,0 @@
---- a/arch/x86/Kconfig
-+++ b/arch/x86/Kconfig
-@@ -466,6 +466,8 @@ config X86_RDC321X
- 	depends on X86_EXTENDED_PLATFORM
- 	select M486
- 	select X86_REBOOTFIXUPS
-+	select EMBEDDED
-+	select ARCH_REQUIRE_GPIOLIB
- 	---help---
- 	  This option is needed for RDC R-321x system-on-chip, also known
- 	  as R-8610-(G).
diff --git a/target/linux/x86/patches-3.3/010-rdc_cpu_ident.patch b/target/linux/x86/patches-3.3/010-rdc_cpu_ident.patch
deleted file mode 100644
index 0f2314a..0000000
--- a/target/linux/x86/patches-3.3/010-rdc_cpu_ident.patch
+++ /dev/null
@@ -1,176 +0,0 @@
---- /dev/null
-+++ b/Documentation/x86/rdc.txt
-@@ -0,0 +1,69 @@
-+
-+Introduction
-+============
-+
-+RDC (http://www.rdc.com.tw) have been manufacturing x86-compatible SoC
-+(system-on-chips) for a number of years.  They are not the fastest of
-+CPUs (clock speeds ranging from 133-150MHz) but 486SX compatibility
-+coupled with very low power consumption[1] and low cost make them ideal
-+for embedded applications.
-+
-+
-+Where to find
-+=============
-+
-+RDC chips show up in numerous embedded devices, but be careful since
-+many of them will not run Linux 2.6 without significant expertise.
-+
-+There are several variants of what the linux kernel refers to generically
-+as RDC321X:  R8610, R321x, S3282 and AMRISC20000.
-+
-+R321x: Found in various routers, see the OpenWrt project for details,
-+   http://wiki.openwrt.org/oldwiki/rdcport
-+
-+R8610: Found on the RDC evaluation board
-+   http://www.ivankuten.com/system-on-chip-soc/rdc-r8610/
-+
-+AMRISC20000: Found in the MGB-100 wireless hard disk
-+   http://tintuc.no-ip.com/linux/tipps/mgb100/
-+
-+S3282: Found in various NAS devices, including the Bifferboard
-+   http://www.bifferos.com
-+
-+
-+Kernel Configuration
-+====================
-+
-+Add support for this CPU with CONFIG_X86_RDC321X.  Ensure that maths
-+emulation is included (CONFIG_MATH_EMULATION selected) and avoid MCE
-+(CONFIG_X86_MCE not selected).
-+
-+
-+CPU detection
-+=============
-+
-+None of these chips support the cpuid instruction, so as with some
-+other x86 compatible SoCs, we must check the north bridge and look
-+for specific 'signature' PCI device config.
-+
-+The current detection code has been tested only on the Bifferboard
-+(S3282 CPU), please send bug reports or success stories with
-+other devices to bifferos@yahoo.co.uk.
-+
-+
-+Credits
-+=======
-+
-+Many thanks to RDC for providing the customer codes to allow
-+detection of all known variants, without which this detection code
-+would have been very hard to ascertain.
-+
-+
-+References
-+==========
-+
-+[1] S3282 in certain NAS solutions consumes less than 1W
-+
-+
-+mark@bifferos.com 2009
-+
---- a/arch/x86/Kconfig
-+++ b/arch/x86/Kconfig
-@@ -464,6 +464,7 @@ config X86_RDC321X
- 	bool "RDC R-321x SoC"
- 	depends on X86_32
- 	depends on X86_EXTENDED_PLATFORM
-+	select PCI
- 	select M486
- 	select X86_REBOOTFIXUPS
- 	select EMBEDDED
---- a/arch/x86/include/asm/processor.h
-+++ b/arch/x86/include/asm/processor.h
-@@ -119,7 +119,8 @@ struct cpuinfo_x86 {
- #define X86_VENDOR_CENTAUR	5
- #define X86_VENDOR_TRANSMETA	7
- #define X86_VENDOR_NSC		8
--#define X86_VENDOR_NUM		9
-+#define X86_VENDOR_RDC		9
-+#define X86_VENDOR_NUM		10
- 
- #define X86_VENDOR_UNKNOWN	0xff
- 
---- a/arch/x86/kernel/cpu/Makefile
-+++ b/arch/x86/kernel/cpu/Makefile
-@@ -26,6 +26,7 @@ obj-$(CONFIG_CPU_SUP_CYRIX_32)		+= cyrix
- obj-$(CONFIG_CPU_SUP_CENTAUR)		+= centaur.o
- obj-$(CONFIG_CPU_SUP_TRANSMETA_32)	+= transmeta.o
- obj-$(CONFIG_CPU_SUP_UMC_32)		+= umc.o
-+obj-$(CONFIG_X86_RDC321X)		+= rdc.o
- 
- obj-$(CONFIG_PERF_EVENTS)		+= perf_event.o
- 
---- /dev/null
-+++ b/arch/x86/kernel/cpu/rdc.c
-@@ -0,0 +1,69 @@
-+/*
-+ * See Documentation/x86/rdc.txt
-+ *
-+ * mark@bifferos.com
-+ */
-+
-+#include <linux/pci.h>
-+#include <asm/pci-direct.h>
-+#include "cpu.h"
-+
-+
-+static void __cpuinit rdc_identify(struct cpuinfo_x86 *c)
-+{
-+	u16 vendor, device;
-+	u32 customer_id;
-+
-+	if (!early_pci_allowed())
-+		return;
-+
-+	/* RDC CPU is SoC (system-on-chip), Northbridge is always present */
-+	vendor = read_pci_config_16(0, 0, 0, PCI_VENDOR_ID);
-+	device = read_pci_config_16(0, 0, 0, PCI_DEVICE_ID);
-+
-+	if (vendor != PCI_VENDOR_ID_RDC || device != PCI_DEVICE_ID_RDC_R6020)
-+		return;  /* not RDC */
-+	/*
-+	 * NB: We could go on and check other devices, e.g. r6040 NIC, but
-+	 * that's probably overkill
-+	 */
-+
-+	customer_id = read_pci_config(0, 0, 0, 0x90);
-+
-+	switch (customer_id) {
-+		/* id names are from RDC */
-+	case 0x00321000:
-+		strcpy(c->x86_model_id, "R3210/R3211");
-+		break;
-+	case 0x00321001:
-+		strcpy(c->x86_model_id, "AMITRISC20000/20010");
-+		break;
-+	case 0x00321002:
-+		strcpy(c->x86_model_id, "R3210X/Edimax");
-+		break;
-+	case 0x00321003:
-+		strcpy(c->x86_model_id, "R3210/Kcodes");
-+		break;
-+	case 0x00321004:  /* tested */
-+		strcpy(c->x86_model_id, "S3282/CodeTek");
-+		break;
-+	case 0x00321007:
-+		strcpy(c->x86_model_id, "R8610");
-+		break;
-+	default:
-+		pr_info("RDC CPU: Unrecognised Customer ID (0x%x) please report to linux-kernel@vger.kernel.org\n", customer_id);
-+		break;
-+	}
-+
-+	strcpy(c->x86_vendor_id, "RDC");
-+	c->x86_vendor = X86_VENDOR_RDC;
-+}
-+
-+static const struct cpu_dev __cpuinitconst rdc_cpu_dev = {
-+	.c_vendor	= "RDC",
-+	.c_ident	= { "RDC" },
-+	.c_identify	= rdc_identify,
-+	.c_x86_vendor	= X86_VENDOR_RDC,
-+};
-+
-+cpu_dev_register(rdc_cpu_dev);
diff --git a/target/linux/x86/patches-3.3/011-tune_lzma_options.patch b/target/linux/x86/patches-3.3/011-tune_lzma_options.patch
deleted file mode 100644
index e6fd44d..0000000
--- a/target/linux/x86/patches-3.3/011-tune_lzma_options.patch
+++ /dev/null
@@ -1,22 +0,0 @@
---- a/scripts/Makefile.lib
-+++ b/scripts/Makefile.lib
-@@ -296,7 +296,7 @@ cmd_bzip2 = (cat $(filter-out FORCE,$^)
- 
- quiet_cmd_lzma = LZMA    $@
- cmd_lzma = (cat $(filter-out FORCE,$^) | \
--	lzma e -d20 -lc1 -lp2 -pb2 -eos -si -so && $(call size_append, $(filter-out FORCE,$^))) > $@ || \
-+	lzma e -lc8 -eos -si -so && $(call size_append, $(filter-out FORCE,$^))) > $@ || \
- 	(rm -f $@ ; false)
- 
- quiet_cmd_lzo = LZO     $@
---- a/arch/x86/include/asm/boot.h
-+++ b/arch/x86/include/asm/boot.h
-@@ -28,7 +28,7 @@
- #error "Invalid value for CONFIG_PHYSICAL_ALIGN"
- #endif
- 
--#ifdef CONFIG_KERNEL_BZIP2
-+#if defined(CONFIG_KERNEL_BZIP2) || defined(CONFIG_KERNEL_LZMA)
- #define BOOT_HEAP_SIZE             0x400000
- #else /* !CONFIG_KERNEL_BZIP2 */
- 
diff --git a/target/linux/x86/patches-3.3/012-export_erase_write.patch b/target/linux/x86/patches-3.3/012-export_erase_write.patch
deleted file mode 100644
index 893d4d8..0000000
--- a/target/linux/x86/patches-3.3/012-export_erase_write.patch
+++ /dev/null
@@ -1,23 +0,0 @@
---- a/drivers/mtd/mtdblock.c
-+++ b/drivers/mtd/mtdblock.c
-@@ -62,7 +62,7 @@ static void erase_callback(struct erase_
- 	wake_up(wait_q);
- }
- 
--static int erase_write (struct mtd_info *mtd, unsigned long pos,
-+int erase_write (struct mtd_info *mtd, unsigned long pos,
- 			int len, const char *buf)
- {
- 	struct erase_info erase;
---- a/include/linux/mtd/mtd.h
-+++ b/include/linux/mtd/mtd.h
-@@ -530,6 +530,9 @@ extern void register_mtd_user (struct mt
- extern int unregister_mtd_user (struct mtd_notifier *old);
- void *mtd_kmalloc_up_to(const struct mtd_info *mtd, size_t *size);
- 
-+int erase_write (struct mtd_info *mtd, unsigned long pos,
-+		 int len, const char *buf);
-+
- void mtd_erase_callback(struct erase_info *instr);
- 
- static inline int mtd_is_bitflip(int err) {
diff --git a/target/linux/x86/patches-3.3/100-rdc_boards.patch b/target/linux/x86/patches-3.3/100-rdc_boards.patch
deleted file mode 100644
index b3cbda2..0000000
--- a/target/linux/x86/patches-3.3/100-rdc_boards.patch
+++ /dev/null
@@ -1,741 +0,0 @@
---- a/arch/x86/Makefile
-+++ b/arch/x86/Makefile
-@@ -136,6 +136,9 @@ libs-y  += arch/x86/lib/
- # See arch/x86/Kbuild for content of core part of the kernel
- core-y += arch/x86/
- 
-+# RDC R-321X support
-+core-$(CONFIG_X86_RDC321X)   += arch/x86/mach-rdc321x/
-+
- # drivers-y are linked after core-y
- drivers-$(CONFIG_MATH_EMULATION) += arch/x86/math-emu/
- drivers-$(CONFIG_PCI)            += arch/x86/pci/
---- /dev/null
-+++ b/arch/x86/mach-rdc321x/Makefile
-@@ -0,0 +1,5 @@
-+#
-+# Makefile for the RDC321x specific parts of the kernel
-+#
-+obj-$(CONFIG_X86_RDC321X)	:= platform.o reboot.o boards/sitecom.o boards/ar525w.o boards/bifferboard.o boards/r8610.o
-+
---- /dev/null
-+++ b/arch/x86/mach-rdc321x/platform.c
-@@ -0,0 +1,115 @@
-+/*
-+ *  Generic RDC321x platform devices
-+ *
-+ *  Copyright (C) 2007-2009 OpenWrt.org
-+ *  Copyright (C) 2007 Florian Fainelli <florian@openwrt.org>
-+ *  Copyright (C) 2008-2009 Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
-+ *
-+ *  This program is free software; you can redistribute it and/or
-+ *  modify it under the terms of the GNU General Public License
-+ *  as published by the Free Software Foundation; either version 2
-+ *  of the License, or (at your option) any later version.
-+ *
-+ *  This program is distributed in the hope that it will be useful,
-+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ *  GNU General Public License for more details.
-+ *
-+ *  You should have received a copy of the GNU General Public License
-+ *  along with this program; if not, write to the
-+ *  Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
-+ *  Boston, MA  02110-1301, USA.
-+ *
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/platform_device.h>
-+#include <linux/mtd/map.h>
-+#include <linux/mtd/mtd.h>
-+#include <linux/mtd/physmap.h>
-+#include <linux/root_dev.h>
-+
-+#include <asm/rdc_boards.h>
-+
-+static struct rdc_platform_data rdcplat_data;
-+
-+/* LEDS */
-+static struct platform_device rdc321x_leds = {
-+	.name = "leds-gpio",
-+	.id = -1,
-+	.dev = {
-+		.platform_data = &rdcplat_data.led_data,
-+	}
-+};
-+
-+/* Button */
-+static struct platform_device rdc321x_buttons = {
-+	.name = "gpio-keys-polled",
-+	.id = -1,
-+	.dev = {
-+		.platform_data = &rdcplat_data.button_data,
-+	}
-+};
-+
-+static __initdata struct platform_device *rdc321x_devs[] = {
-+	&rdc321x_leds,
-+	&rdc321x_buttons,
-+};
-+
-+const char *__initdata boards[] = {
-+	"Sitecom",
-+	"AR525W",
-+	"Bifferboard",
-+	"R8610",
-+	0
-+};
-+
-+static struct map_info rdc_map_info = {
-+	.name		= "rdc_flash",
-+	.size		= 0x800000,	/* 8MB */
-+	.phys		= 0xFF800000,	/* (u32) -rdc_map_info.size */
-+	.bankwidth	= 2,
-+};
-+
-+static int __init rdc_board_setup(void)
-+{
-+	struct mtd_info *mtdinfo;
-+	struct mtd_part_parser_data *ppdata;
-+	int res;
-+
-+	simple_map_init(&rdc_map_info);
-+
-+	while (1) {
-+		rdc_map_info.virt = ioremap(rdc_map_info.phys,
-+					    rdc_map_info.size);
-+		if (rdc_map_info.virt == NULL)
-+			continue;
-+
-+		mtdinfo = do_map_probe("cfi_probe", &rdc_map_info);
-+		if (mtdinfo == NULL)
-+			mtdinfo = do_map_probe("jedec_probe", &rdc_map_info);
-+		if (mtdinfo != NULL)
-+			break;
-+
-+		iounmap(rdc_map_info.virt);
-+		if ((rdc_map_info.size >>= 1) < 0x100000)	/* 1MB */
-+			panic("RDC321x: Could not find start of flash!");
-+		rdc_map_info.phys = (u32) -rdc_map_info.size;
-+	}
-+
-+	/*
-+	 * TODO: add a new field to mtd_part_parser_data, and use that
-+	 * instead of this ugly casting
-+	 */
-+	ppdata = (struct mtd_part_parser_data *) &rdcplat_data;
-+	res = mtd_device_parse_register(mtdinfo, boards, ppdata, NULL, 0);
-+	if (res) {
-+		panic("RDC321x: can't identify board type");
-+		return -ENOSYS;
-+	}
-+
-+	ROOT_DEV = 0;
-+
-+	return platform_add_devices(rdc321x_devs, ARRAY_SIZE(rdc321x_devs));
-+}
-+late_initcall(rdc_board_setup);
---- /dev/null
-+++ b/arch/x86/mach-rdc321x/boards/ar525w.c
-@@ -0,0 +1,247 @@
-+/*
-+ * ar525w RDC321x platform devices
-+ *
-+ *  Copyright (C) 2007-2009 OpenWrt.org
-+ *  Copyright (C) 2007 Florian Fainelli <florian@openwrt.org>
-+ *  Copyright (C) 2008-2009 Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
-+ *
-+ *  This program is free software; you can redistribute it and/or
-+ *  modify it under the terms of the GNU General Public License
-+ *  as published by the Free Software Foundation; either version 2
-+ *  of the License, or (at your option) any later version.
-+ *
-+ *  This program is distributed in the hope that it will be useful,
-+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ *  GNU General Public License for more details.
-+ *
-+ *  You should have received a copy of the GNU General Public License
-+ *  along with this program; if not, write to the
-+ *  Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
-+ *  Boston, MA  02110-1301, USA.
-+ *
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/mtd/physmap.h>
-+#include <linux/input.h>
-+#include <linux/vmalloc.h>
-+#include <linux/mtd/mtd.h>
-+#include <linux/slab.h>
-+
-+#include <asm/rdc_boards.h>
-+
-+struct image_header {
-+	char magic[4];              /* ASICII: GMTK */
-+	u32 checksum;               /* CRC32 */
-+	u32 version;                /* x.x.x.x */
-+	u32 kernelsz;               /* The size of the kernel image */
-+	u32 imagesz;                /* The length of this image file ( kernel + romfs + this header) */
-+	u32 pid;                    /* Product ID */
-+	u32 fastcksum;              /* Partial CRC32 on (First(256), medium(256), last(512)) */
-+	u32 reserved;
-+};
-+
-+static struct gpio_led ar525w_leds[] = {
-+	{ .name = "rdc321x:dmz", .gpio = 1, .active_low = 1},
-+};
-+static struct gpio_keys_button ar525w_btns[] = {
-+	{
-+		.gpio = 6,
-+		.code = BTN_0,
-+		.desc = "Reset",
-+		.active_low = 1,
-+	}
-+};
-+
-+static u32 __initdata crctab[257] = {
-+	0x00000000, 0x77073096, 0xee0e612c, 0x990951ba,
-+	0x076dc419, 0x706af48f, 0xe963a535, 0x9e6495a3,
-+	0x0edb8832, 0x79dcb8a4, 0xe0d5e91e, 0x97d2d988,
-+	0x09b64c2b, 0x7eb17cbd, 0xe7b82d07, 0x90bf1d91,
-+	0x1db71064, 0x6ab020f2, 0xf3b97148, 0x84be41de,
-+	0x1adad47d, 0x6ddde4eb, 0xf4d4b551, 0x83d385c7,
-+	0x136c9856, 0x646ba8c0, 0xfd62f97a, 0x8a65c9ec,
-+	0x14015c4f, 0x63066cd9, 0xfa0f3d63, 0x8d080df5,
-+	0x3b6e20c8, 0x4c69105e, 0xd56041e4, 0xa2677172,
-+	0x3c03e4d1, 0x4b04d447, 0xd20d85fd, 0xa50ab56b,
-+	0x35b5a8fa, 0x42b2986c, 0xdbbbc9d6, 0xacbcf940,
-+	0x32d86ce3, 0x45df5c75, 0xdcd60dcf, 0xabd13d59,
-+	0x26d930ac, 0x51de003a, 0xc8d75180, 0xbfd06116,
-+	0x21b4f4b5, 0x56b3c423, 0xcfba9599, 0xb8bda50f,
-+	0x2802b89e, 0x5f058808, 0xc60cd9b2, 0xb10be924,
-+	0x2f6f7c87, 0x58684c11, 0xc1611dab, 0xb6662d3d,
-+	0x76dc4190, 0x01db7106, 0x98d220bc, 0xefd5102a,
-+	0x71b18589, 0x06b6b51f, 0x9fbfe4a5, 0xe8b8d433,
-+	0x7807c9a2, 0x0f00f934, 0x9609a88e, 0xe10e9818,
-+	0x7f6a0dbb, 0x086d3d2d, 0x91646c97, 0xe6635c01,
-+	0x6b6b51f4, 0x1c6c6162, 0x856530d8, 0xf262004e,
-+	0x6c0695ed, 0x1b01a57b, 0x8208f4c1, 0xf50fc457,
-+	0x65b0d9c6, 0x12b7e950, 0x8bbeb8ea, 0xfcb9887c,
-+	0x62dd1ddf, 0x15da2d49, 0x8cd37cf3, 0xfbd44c65,
-+	0x4db26158, 0x3ab551ce, 0xa3bc0074, 0xd4bb30e2,
-+	0x4adfa541, 0x3dd895d7, 0xa4d1c46d, 0xd3d6f4fb,
-+	0x4369e96a, 0x346ed9fc, 0xad678846, 0xda60b8d0,
-+	0x44042d73, 0x33031de5, 0xaa0a4c5f, 0xdd0d7cc9,
-+	0x5005713c, 0x270241aa, 0xbe0b1010, 0xc90c2086,
-+	0x5768b525, 0x206f85b3, 0xb966d409, 0xce61e49f,
-+	0x5edef90e, 0x29d9c998, 0xb0d09822, 0xc7d7a8b4,
-+	0x59b33d17, 0x2eb40d81, 0xb7bd5c3b, 0xc0ba6cad,
-+	0xedb88320, 0x9abfb3b6, 0x03b6e20c, 0x74b1d29a,
-+	0xead54739, 0x9dd277af, 0x04db2615, 0x73dc1683,
-+	0xe3630b12, 0x94643b84, 0x0d6d6a3e, 0x7a6a5aa8,
-+	0xe40ecf0b, 0x9309ff9d, 0x0a00ae27, 0x7d079eb1,
-+	0xf00f9344, 0x8708a3d2, 0x1e01f268, 0x6906c2fe,
-+	0xf762575d, 0x806567cb, 0x196c3671, 0x6e6b06e7,
-+	0xfed41b76, 0x89d32be0, 0x10da7a5a, 0x67dd4acc,
-+	0xf9b9df6f, 0x8ebeeff9, 0x17b7be43, 0x60b08ed5,
-+	0xd6d6a3e8, 0xa1d1937e, 0x38d8c2c4, 0x4fdff252,
-+	0xd1bb67f1, 0xa6bc5767, 0x3fb506dd, 0x48b2364b,
-+	0xd80d2bda, 0xaf0a1b4c, 0x36034af6, 0x41047a60,
-+	0xdf60efc3, 0xa867df55, 0x316e8eef, 0x4669be79,
-+	0xcb61b38c, 0xbc66831a, 0x256fd2a0, 0x5268e236,
-+	0xcc0c7795, 0xbb0b4703, 0x220216b9, 0x5505262f,
-+	0xc5ba3bbe, 0xb2bd0b28, 0x2bb45a92, 0x5cb36a04,
-+	0xc2d7ffa7, 0xb5d0cf31, 0x2cd99e8b, 0x5bdeae1d,
-+	0x9b64c2b0, 0xec63f226, 0x756aa39c, 0x026d930a,
-+	0x9c0906a9, 0xeb0e363f, 0x72076785, 0x05005713,
-+	0x95bf4a82, 0xe2b87a14, 0x7bb12bae, 0x0cb61b38,
-+	0x92d28e9b, 0xe5d5be0d, 0x7cdcefb7, 0x0bdbdf21,
-+	0x86d3d2d4, 0xf1d4e242, 0x68ddb3f8, 0x1fda836e,
-+	0x81be16cd, 0xf6b9265b, 0x6fb077e1, 0x18b74777,
-+	0x88085ae6, 0xff0f6a70, 0x66063bca, 0x11010b5c,
-+	0x8f659eff, 0xf862ae69, 0x616bffd3, 0x166ccf45,
-+	0xa00ae278, 0xd70dd2ee, 0x4e048354, 0x3903b3c2,
-+	0xa7672661, 0xd06016f7, 0x4969474d, 0x3e6e77db,
-+	0xaed16a4a, 0xd9d65adc, 0x40df0b66, 0x37d83bf0,
-+	0xa9bcae53, 0xdebb9ec5, 0x47b2cf7f, 0x30b5ffe9,
-+	0xbdbdf21c, 0xcabac28a, 0x53b39330, 0x24b4a3a6,
-+	0xbad03605, 0xcdd70693, 0x54de5729, 0x23d967bf,
-+	0xb3667a2e, 0xc4614ab8, 0x5d681b02, 0x2a6f2b94,
-+	0xb40bbe37, 0xc30c8ea1, 0x5a05df1b, 0x2d02ef8d,
-+	0
-+};
-+
-+static u32 __init crc32(u8 * buf, u32 len)
-+{
-+	register int i;
-+	u32 sum;
-+	register u32 s0;
-+	s0 = ~0;
-+	for (i = 0; i < len; i++) {
-+		s0 = (s0 >> 8) ^ crctab[(u8) (s0 & 0xFF) ^ buf[i]];
-+	}
-+	sum = ~s0;
-+	return sum;
-+}
-+
-+static int __init fixup_ar525w_header(struct mtd_info *master, struct image_header *header)
-+{
-+	char *buffer;
-+	int res;
-+	u32 bufferlength = header->kernelsz + sizeof(struct image_header);
-+	u32 len;
-+	static char crcbuf[0x400];
-+
-+	printk(KERN_INFO "Fixing up AR525W header, old image size: %u, new image size: %u\n",
-+		   header->imagesz, bufferlength);
-+
-+	buffer = vmalloc(bufferlength);
-+	if (!buffer) {
-+		printk(KERN_ERR "Can't allocate %u bytes\n", bufferlength);
-+		return -ENOMEM;
-+	}
-+
-+	res =  master->read(master, 0x0, bufferlength, &len, buffer);
-+	if (res || len != bufferlength)
-+		goto out;
-+
-+	header = (struct image_header *) buffer;
-+	header->imagesz = bufferlength;
-+	header->checksum = 0;
-+	header->fastcksum = 0;
-+
-+	memcpy(crcbuf, buffer, 0x100);
-+	memcpy(crcbuf + 0x100, buffer + (bufferlength >> 1) - ((bufferlength & 0x6) >> 1), 0x100);
-+	memcpy(crcbuf + 0x200, buffer + bufferlength - 0x200, 0x200);
-+
-+	header->fastcksum = crc32(crcbuf, sizeof(crcbuf));
-+	header->checksum = crc32(buffer, bufferlength);
-+
-+	if (master->unlock)
-+		master->unlock(master, 0, master->erasesize);
-+	res = erase_write (master, 0, master->erasesize, buffer);
-+	if (res)
-+		printk(KERN_ERR "Can't rewrite image header\n");
-+
-+out:
-+	vfree(buffer);
-+	return res;
-+}
-+
-+static int __init
-+parse_ar525w_partitions(struct mtd_info *master, struct mtd_partition **pparts,
-+			struct mtd_part_parser_data *plat_data)
-+{
-+	struct image_header header;
-+	int res;
-+	size_t len;
-+	struct mtd_partition *rdc_flash_parts;
-+	struct rdc_platform_data *pdata = (struct rdc_platform_data *) plat_data;
-+
-+	if (master->size != 0x400000) //4MB
-+		return -ENOSYS;
-+
-+	res =  master->read(master, 0x0, sizeof(header), &len, (char *)&header);
-+	if (res)
-+		return res;
-+
-+	if (strncmp(header.magic, "GMTK", 4))
-+		return -ENOSYS;
-+
-+	if (header.kernelsz > 0x400000 || header.kernelsz < master->erasesize) {
-+		printk(KERN_ERR "AR525W image header found, but seems corrupt, kernel size %u\n", header.kernelsz);
-+		return -EINVAL;
-+	}
-+
-+	if (header.kernelsz + sizeof(header) != header.imagesz) {
-+		res = fixup_ar525w_header(master, &header);
-+		if (res)
-+			return res;
-+	}
-+
-+	rdc_flash_parts = kzalloc(sizeof(struct mtd_partition) * 3, GFP_KERNEL);
-+
-+	rdc_flash_parts[0].name = "firmware";
-+	rdc_flash_parts[0].offset = 0x0;
-+	rdc_flash_parts[0].size = 0x3E0000;
-+	rdc_flash_parts[1].name = "rootfs";
-+	rdc_flash_parts[1].offset = header.kernelsz + sizeof(header);
-+	rdc_flash_parts[1].size = rdc_flash_parts[0].size - rdc_flash_parts[1].offset;
-+	rdc_flash_parts[2].name = "bootloader";
-+	rdc_flash_parts[2].offset = 0x3E0000;
-+	rdc_flash_parts[2].size = 0x20000;
-+
-+	*pparts = rdc_flash_parts;
-+
-+	pdata->led_data.num_leds = ARRAY_SIZE(ar525w_leds);
-+	pdata->led_data.leds = ar525w_leds;
-+	pdata->button_data.nbuttons = ARRAY_SIZE(ar525w_btns);
-+	pdata->button_data.buttons = ar525w_btns;
-+
-+	return 3;
-+}
-+
-+static struct mtd_part_parser __initdata ar525w_parser = {
-+	.owner = THIS_MODULE,
-+	.parse_fn = parse_ar525w_partitions,
-+	.name = "AR525W",
-+};
-+
-+static int __init ar525w_setup(void)
-+{
-+	return register_mtd_parser(&ar525w_parser);
-+}
-+
-+arch_initcall(ar525w_setup);
---- /dev/null
-+++ b/arch/x86/mach-rdc321x/boards/bifferboard.c
-@@ -0,0 +1,74 @@
-+/*
-+ *  Bifferboard RDC321x platform devices
-+ *
-+ *  Copyright (C) 2010 bifferos@yahoo.co.uk
-+ *
-+ *  This program is free software; you can redistribute it and/or
-+ *  modify it under the terms of the GNU General Public License
-+ *  as published by the Free Software Foundation; either version 2
-+ *  of the License, or (at your option) any later version.
-+ *
-+ *  This program is distributed in the hope that it will be useful,
-+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ *  GNU General Public License for more details.
-+ *
-+ *  You should have received a copy of the GNU General Public License
-+ *  along with this program; if not, write to the
-+ *  Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
-+ *  Boston, MA  02110-1301, USA.
-+ *
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/mtd/physmap.h>
-+#include <linux/input.h>
-+#include <linux/slab.h>
-+
-+#include <asm/rdc_boards.h>
-+
-+static int __init
-+parse_bifferboard_partitions(struct mtd_info *master,
-+			     struct mtd_partition **pparts,
-+			     struct mtd_part_parser_data *plat_data)
-+{
-+	int res;
-+	size_t len;
-+	struct mtd_partition *rdc_flash_parts;
-+	u32 kernel_len;
-+	u16 tmp;
-+
-+	res =  master->read(master, 0x4000 + 1036, 2, &len, (char *) &tmp);
-+	if (res)
-+		return res;
-+	kernel_len = tmp * master->erasesize;
-+
-+	rdc_flash_parts = kzalloc(sizeof(struct mtd_partition) * 3, GFP_KERNEL);
-+
-+	*pparts = rdc_flash_parts;
-+
-+	rdc_flash_parts[0].name = "kernel";
-+	rdc_flash_parts[0].offset = 0;
-+	rdc_flash_parts[0].size = kernel_len;
-+	rdc_flash_parts[1].name = "rootfs";
-+	rdc_flash_parts[1].offset = kernel_len;
-+	rdc_flash_parts[1].size = master->size - kernel_len - 0x10000;
-+	rdc_flash_parts[2].name = "biffboot";
-+	rdc_flash_parts[2].offset = master->size - 0x10000;
-+	rdc_flash_parts[2].size = 0x10000;
-+
-+	return 3;
-+}
-+
-+struct mtd_part_parser __initdata bifferboard_parser = {
-+	.owner = THIS_MODULE,
-+	.parse_fn = parse_bifferboard_partitions,
-+	.name = "Bifferboard",
-+};
-+
-+static int __init bifferboard_setup(void)
-+{
-+	return register_mtd_parser(&bifferboard_parser);
-+}
-+arch_initcall(bifferboard_setup);
---- /dev/null
-+++ b/arch/x86/mach-rdc321x/boards/r8610.c
-@@ -0,0 +1,69 @@
-+/*
-+ *  R8610 RDC321x platform devices
-+ *
-+ *  Copyright (C) 2009, Florian Fainelli <florian@openwrt.org>
-+ *
-+ *  This program is free software; you can redistribute it and/or
-+ *  modify it under the terms of the GNU General Public License
-+ *  as published by the Free Software Foundation; either version 2
-+ *  of the License, or (at your option) any later version.
-+ *
-+ *  This program is distributed in the hope that it will be useful,
-+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ *  GNU General Public License for more details.
-+ *
-+ *  You should have received a copy of the GNU General Public License
-+ *  along with this program; if not, write to the
-+ *  Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
-+ *  Boston, MA  02110-1301, USA.
-+ *
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/mtd/physmap.h>
-+#include <linux/input.h>
-+#include <linux/slab.h>
-+
-+#include <asm/rdc_boards.h>
-+
-+static int __init
-+parse_r8610_partitions(struct mtd_info *master, struct mtd_partition **pparts,
-+		       struct mtd_part_parser_data *plat_data)
-+{
-+	struct mtd_partition *rdc_flash_parts;
-+
-+	rdc_flash_parts = kzalloc(sizeof(struct mtd_partition) * 4, GFP_KERNEL);
-+
-+	*pparts = rdc_flash_parts;
-+
-+	rdc_flash_parts[0].name = "kernel";
-+	rdc_flash_parts[0].size = 0x001f0000;
-+	rdc_flash_parts[0].offset = 0;
-+	rdc_flash_parts[1].name = "config";
-+	rdc_flash_parts[1].size = 0x10000;
-+	rdc_flash_parts[1].offset = MTDPART_OFS_APPEND;
-+	rdc_flash_parts[2].name = "rootfs";
-+	rdc_flash_parts[2].size = 0x1E0000;
-+	rdc_flash_parts[2].offset = MTDPART_OFS_APPEND;
-+	rdc_flash_parts[3].name = "redboot";
-+	rdc_flash_parts[3].size = 0x20000;
-+	rdc_flash_parts[3].offset = MTDPART_OFS_APPEND;
-+	rdc_flash_parts[3].mask_flags = MTD_WRITEABLE;
-+
-+	return 4;
-+}
-+
-+struct mtd_part_parser __initdata r8610_parser = {
-+	.owner = THIS_MODULE,
-+	.parse_fn = parse_r8610_partitions,
-+	.name = "R8610",
-+};
-+
-+static int __init r8610_setup(void)
-+{
-+	return register_mtd_parser(&r8610_parser);
-+}
-+
-+arch_initcall(r8610_setup);
---- /dev/null
-+++ b/arch/x86/mach-rdc321x/boards/sitecom.c
-@@ -0,0 +1,115 @@
-+/*
-+ *  Sitecom RDC321x platform devices
-+ *
-+ *  Copyright (C) 2007-2009 OpenWrt.org
-+ *  Copyright (C) 2007 Florian Fainelli <florian@openwrt.org>
-+ *  Copyright (C) 2008-2009 Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
-+ *
-+ *  This program is free software; you can redistribute it and/or
-+ *  modify it under the terms of the GNU General Public License
-+ *  as published by the Free Software Foundation; either version 2
-+ *  of the License, or (at your option) any later version.
-+ *
-+ *  This program is distributed in the hope that it will be useful,
-+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ *  GNU General Public License for more details.
-+ *
-+ *  You should have received a copy of the GNU General Public License
-+ *  along with this program; if not, write to the
-+ *  Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
-+ *  Boston, MA  02110-1301, USA.
-+ *
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/mtd/physmap.h>
-+#include <linux/input.h>
-+#include <linux/slab.h>
-+
-+#include <asm/rdc_boards.h>
-+
-+struct image_header {
-+	char	magic[4];
-+	u32	kernel_length;
-+	u32	ramdisk_length;
-+	char	magic2[4];
-+	u32	kernel_length2;
-+};
-+
-+static struct gpio_led sitecom_leds[] = {
-+	{ .name = "rdc321x:power", .gpio = 15, .active_low = 1},
-+	{ .name = "rdc321x:usb0", .gpio = 0, .active_low = 1},
-+	{ .name = "rdc321x:usb1", .gpio = 1, .active_low = 1},
-+};
-+
-+static struct gpio_keys_button sitecom_btns[] = {
-+	{
-+		.gpio = 6,
-+		.code = BTN_0,
-+		.desc = "Reset",
-+		.active_low = 1,
-+	}
-+};
-+
-+static int __init
-+parse_sitecom_partitions(struct mtd_info *master, struct mtd_partition **pparts,
-+			 struct mtd_part_parser_data *plat_data)
-+{
-+	struct image_header header;
-+	int res;
-+	size_t len;
-+	struct mtd_partition *rdc_flash_parts;
-+	struct rdc_platform_data *pdata = (struct rdc_platform_data *) plat_data;
-+
-+	if (master->size != 0x400000) /* 4MB */
-+		return -ENOSYS;
-+
-+	res =  master->read(master, 0x8000, sizeof(header), &len, (char *)&header);
-+	if (res)
-+		return res;
-+
-+	if (strncmp(header.magic, "CSYS", 4) || strncmp(header.magic2, "WRRM", 4))
-+		return -ENOSYS;
-+
-+	rdc_flash_parts = kzalloc(sizeof(struct mtd_partition) * 5, GFP_KERNEL);
-+
-+	rdc_flash_parts[0].name = "firmware";
-+	rdc_flash_parts[0].offset = 0x8000;
-+	rdc_flash_parts[0].size = 0x3F0000 - 0x8000;
-+	rdc_flash_parts[1].name = "config";
-+	rdc_flash_parts[1].offset = 0;
-+	rdc_flash_parts[1].size = 0x8000;
-+	rdc_flash_parts[2].name = "kernel";
-+	rdc_flash_parts[2].offset = 0x8014;
-+	rdc_flash_parts[2].size = header.kernel_length;
-+	rdc_flash_parts[3].name = "rootfs";
-+	rdc_flash_parts[3].offset = 0x8014 + header.kernel_length;
-+	rdc_flash_parts[3].size = 0x3F0000 - rdc_flash_parts[3].offset;
-+	rdc_flash_parts[4].name = "bootloader";
-+	rdc_flash_parts[4].offset = 0x3F0000;
-+	rdc_flash_parts[4].size = 0x10000;
-+
-+	*pparts = rdc_flash_parts;
-+
-+	pdata->led_data.num_leds = ARRAY_SIZE(sitecom_leds);
-+	pdata->led_data.leds = sitecom_leds;
-+	pdata->button_data.nbuttons = ARRAY_SIZE(sitecom_btns);
-+	pdata->button_data.buttons = sitecom_btns;
-+
-+	return 5;
-+}
-+
-+struct mtd_part_parser __initdata sitecom_parser = {
-+	.owner = THIS_MODULE,
-+	.parse_fn = parse_sitecom_partitions,
-+	.name = "Sitecom",
-+};
-+
-+static int __init sitecom_setup(void)
-+{
-+	return register_mtd_parser(&sitecom_parser);
-+}
-+
-+arch_initcall(sitecom_setup);
---- /dev/null
-+++ b/arch/x86/mach-rdc321x/reboot.c
-@@ -0,0 +1,44 @@
-+/*
-+ *  This program is free software; you can redistribute it and/or
-+ *  modify it under the terms of the GNU General Public License
-+ *  as published by the Free Software Foundation; either version 2
-+ *  of the License, or (at your option) any later version.
-+ *
-+ *  This program is distributed in the hope that it will be useful,
-+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ *  GNU General Public License for more details.
-+ *
-+ *  You should have received a copy of the GNU General Public License
-+ *  along with this program; if not, write to the
-+ *  Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
-+ *  Boston, MA  02110-1301, USA.
-+ *
-+ */
-+
-+#include <asm/reboot.h>
-+#include <asm/io.h>
-+
-+static void rdc321x_reset(void)
-+{
-+	unsigned i;
-+
-+	/* write to southbridge config register 0x41
-+	   enable pci reset on cpu reset, make internal port 0x92 writeable
-+	   and switch port 0x92 to internal */
-+	outl(0x80003840, 0xCF8);
-+	i = inl(0xCFC);
-+	i |= 0x1600;
-+	outl(i, 0xCFC);
-+
-+	/* soft reset */
-+	outb(1, 0x92);
-+}
-+
-+static int __init rdc_setup_reset(void)
-+{
-+	machine_ops.emergency_restart = rdc321x_reset;
-+	return 0;
-+}
-+
-+arch_initcall(rdc_setup_reset);
---- /dev/null
-+++ b/arch/x86/include/asm/rdc_boards.h
-@@ -0,0 +1,36 @@
-+/*
-+ *  RDC321x boards
-+ *
-+ *  Copyright (C) 2007-2009 OpenWrt.org
-+ *  Copyright (C) 2007 Florian Fainelli <florian@openwrt.org>
-+ *  Copyright (C) 2008-2009 Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
-+ *
-+ *  This program is free software; you can redistribute it and/or
-+ *  modify it under the terms of the GNU General Public License
-+ *  as published by the Free Software Foundation; either version 2
-+ *  of the License, or (at your option) any later version.
-+ *
-+ *  This program is distributed in the hope that it will be useful,
-+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ *  GNU General Public License for more details.
-+ *
-+ *  You should have received a copy of the GNU General Public License
-+ *  along with this program; if not, write to the
-+ *  Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
-+ *  Boston, MA  02110-1301, USA.
-+ *
-+ */
-+
-+#ifndef _RDC_BOARDS_H__
-+#define _RDC_BOARDS_H__
-+
-+#include <linux/leds.h>
-+#include <linux/gpio_keys.h>
-+
-+struct rdc_platform_data {
-+	struct gpio_led_platform_data led_data;
-+	struct gpio_keys_platform_data button_data;
-+};
-+
-+#endif
diff --git a/target/linux/x86/patches-3.3/120-panic_on_unrecovered_nmi.patch b/target/linux/x86/patches-3.3/120-panic_on_unrecovered_nmi.patch
deleted file mode 100644
index 6a1279c..0000000
--- a/target/linux/x86/patches-3.3/120-panic_on_unrecovered_nmi.patch
+++ /dev/null
@@ -1,11 +0,0 @@
---- a/drivers/mfd/rdc321x-southbridge.c
-+++ b/drivers/mfd/rdc321x-southbridge.c
-@@ -86,6 +86,8 @@ static int __devinit rdc321x_sb_probe(st
- 	rdc321x_gpio_pdata.sb_pdev = pdev;
- 	rdc321x_wdt_pdata.sb_pdev = pdev;
- 
-+	panic_on_unrecovered_nmi = 1;
-+
- 	return mfd_add_devices(&pdev->dev, -1,
- 		rdc321x_sb_cells, ARRAY_SIZE(rdc321x_sb_cells), NULL, 0);
- }
diff --git a/target/linux/x86/patches-3.3/150-pit-tick-rate.patch b/target/linux/x86/patches-3.3/150-pit-tick-rate.patch
deleted file mode 100644
index 5af3cef..0000000
--- a/target/linux/x86/patches-3.3/150-pit-tick-rate.patch
+++ /dev/null
@@ -1,14 +0,0 @@
---- a/include/linux/timex.h
-+++ b/include/linux/timex.h
-@@ -274,7 +274,11 @@ extern void hardpps(const struct timespe
- int read_current_timer(unsigned long *timer_val);
- 
- /* The clock frequency of the i8253/i8254 PIT */
-+#ifdef CONFIG_X86_RDC321X
-+#define PIT_TICK_RATE 1041816ul
-+#else
- #define PIT_TICK_RATE 1193182ul
-+#endif
- 
- #endif /* KERNEL */
- 
diff --git a/target/linux/x86/patches-3.3/160-kexec-fix.patch b/target/linux/x86/patches-3.3/160-kexec-fix.patch
deleted file mode 100644
index ea32494..0000000
--- a/target/linux/x86/patches-3.3/160-kexec-fix.patch
+++ /dev/null
@@ -1,43 +0,0 @@
-From 357954613bdbab0c1f3986589ff30cc4855a2efd Mon Sep 17 00:00:00 2001
-From: root <root@cent.localnet>
-Date: Sun, 6 Dec 2009 18:26:43 +0000
-Subject: [PATCH 03/14] kexec fix
-
----
- arch/x86/kernel/relocate_kernel_32.S |    6 ++++++
- 1 files changed, 6 insertions(+), 0 deletions(-)
-
---- a/arch/x86/kernel/relocate_kernel_32.S
-+++ b/arch/x86/kernel/relocate_kernel_32.S
-@@ -54,8 +54,10 @@ relocate_kernel:
- 	movl	%eax, CR0(%edi)
- 	movl	%cr3, %eax
- 	movl	%eax, CR3(%edi)
-+#ifndef CONFIG_X86_RDC321X
- 	movl	%cr4, %eax
- 	movl	%eax, CR4(%edi)
-+#endif
- 
- 	/* read the arguments and say goodbye to the stack */
- 	movl  20+4(%esp), %ebx /* page_list */
-@@ -124,7 +126,9 @@ identity_mapped:
- 	 * Setting everything to zero seems safe.
- 	 */
- 	xorl	%eax, %eax
-+#ifndef CONFIG_X86_RDC321X
- 	movl	%eax, %cr4
-+#endif
- 
- 	jmp 1f
- 1:
-@@ -195,8 +199,10 @@ identity_mapped:
- 	ret
- 
- virtual_mapped:
-+#ifndef CONFIG_X86_RDC321X
- 	movl	CR4(%edi), %eax
- 	movl	%eax, %cr4
-+#endif
- 	movl	CR3(%edi), %eax
- 	movl	%eax, %cr3
- 	movl	CR0(%edi), %eax
diff --git a/target/linux/x86/rdc/base-files/etc/config/network b/target/linux/x86/rdc/base-files/etc/config/network
deleted file mode 100644
index 9ee12dc..0000000
--- a/target/linux/x86/rdc/base-files/etc/config/network
+++ /dev/null
@@ -1,26 +0,0 @@
-# Copyright (C) 2009 OpenWrt.org
-
-config interface loopback
-        option ifname   lo
-        option proto    static
-        option ipaddr   127.0.0.1
-        option netmask  255.0.0.0
-
-config interface lan
-        option ifname   eth1
-        option type     bridge
-        option proto    static
-        option ipaddr   192.168.1.1
-        option netmask  255.255.255.0
-        option ip6assign 60
-
-config interface wan
-	option ifname	eth0
-	option proto	dhcp
-
-config interface wan6
-        option ifname   @wan
-        option proto    dhcpv6
-
-config globals globals
-        option ula_prefix auto
diff --git a/target/linux/x86/rdc/base-files/etc/diag.sh b/target/linux/x86/rdc/base-files/etc/diag.sh
deleted file mode 100644
index 03796d7..0000000
--- a/target/linux/x86/rdc/base-files/etc/diag.sh
+++ /dev/null
@@ -1,17 +0,0 @@
-#!/bin/sh
-# Copyright (C) 2007-2013 OpenWrt.org
-
-. /lib/functions/leds.sh
-
-status_led="rdc321x:dmz"
-
-set_state() {
-	case "$1" in
-	preinit)
-		status_led_on
-		;;
-	done)
-		status_led_off
-		;;
-	esac
-}
diff --git a/target/linux/x86/rdc/base-files/lib/preinit/05_set_ether_mac_rdc b/target/linux/x86/rdc/base-files/lib/preinit/05_set_ether_mac_rdc
deleted file mode 100644
index 0518766..0000000
--- a/target/linux/x86/rdc/base-files/lib/preinit/05_set_ether_mac_rdc
+++ /dev/null
@@ -1,36 +0,0 @@
-#!/bin/sh
-# Copyright (C) 2009-2012 OpenWrt.org
-
-. /lib/functions.sh
-
-r6040_module() {
-	insmod libphy
-	insmod swconfig
-	insmod ip17xx
-	sleep 1
-	insmod r6040
-}
-
-set_ether_mac() {
-	kernel=$(grep firmware /proc/mtd | awk -F: '{print $1}')
-	[ -n "$kernel" ] && hdr=$(dd if=/dev/$kernel count=4 bs=1 2> /dev/null)
-	[ "$hdr" = "CSYS" ] && config=$(find_mtd_part config)
-	if [ -n "$config" ]; then
-		mac0=$(hexdump -n 6 -e '6/1 ":%X"' -s 24583 $config | cut -c2-)
-		[ "$mac0" = "FF:FF:FF:FF:FF:FF" -o "$mac0" = "0:0:0:0:0:0" ] && unset mac0
-		mac1=$(hexdump -n 6 -e '6/1 ":%X"' -s 24589 $config | cut -c2-)
-		[ "$mac1" = "FF:FF:FF:FF:FF:FF" -o "$mac1" = "0:0:0:0:0:0" ] && unset mac1
-	fi
-	if [ -n "$mac0" ]; then
-		logger -t kernel -p user.info "r6040: Setting MAC for eth0 to $mac0"
-		ifconfig eth0 hw ether "$mac0"
-	fi
-	if [ -n "$mac1" ]; then
-		logger -t kernel -p user.info "r6040: Setting MAC for eth1 to $mac1"
-		ifconfig eth1 hw ether "$mac1"
-	fi
-}
-
-boot_hook_add preinit_main r6040_module
-boot_hook_add preinit_main set_ether_mac
-
diff --git a/target/linux/x86/rdc/base-files/lib/upgrade/platform.sh b/target/linux/x86/rdc/base-files/lib/upgrade/platform.sh
deleted file mode 100644
index 6348a69..0000000
--- a/target/linux/x86/rdc/base-files/lib/upgrade/platform.sh
+++ /dev/null
@@ -1,10 +0,0 @@
-PART_NAME=firmware
-
-platform_check_image() {
-	[ "$(get_magic_word $(find_mtd_part firmware))" -eq "$(get_magic_word "$1")" ] && return 0
-
-	echo "Invalid image type. Please use an appropriate .bin file"
-	return 1
-}
-
-# use default for platform_do_upgrade()
diff --git a/target/linux/x86/rdc/config-3.10 b/target/linux/x86/rdc/config-3.10
deleted file mode 100644
index 4d2b953..0000000
--- a/target/linux/x86/rdc/config-3.10
+++ /dev/null
@@ -1,66 +0,0 @@
-CONFIG_ARCH_RANDOM=y
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-# CONFIG_ARPD is not set
-# CONFIG_BASE_FULL is not set
-CONFIG_BASE_SMALL=1
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BRIDGE=m
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_CMDLINE="console=uart,io,0x3f8 rootfstype=squashfs,jffs2"
-CONFIG_CMDLINE_BOOL=y
-# CONFIG_CMDLINE_OVERRIDE is not set
-# CONFIG_COMPAT_VDSO is not set
-# CONFIG_CPU_SUP_AMD is not set
-# CONFIG_CPU_SUP_CENTAUR is not set
-# CONFIG_CPU_SUP_CYRIX_32 is not set
-# CONFIG_CPU_SUP_INTEL is not set
-# CONFIG_CPU_SUP_TRANSMETA_32 is not set
-# CONFIG_CPU_SUP_UMC_32 is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_EARLY_PRINTK is not set
-# CONFIG_FIRMWARE_MEMMAP is not set
-CONFIG_GPIOLIB=y
-CONFIG_GPIO_RDC321X=y
-CONFIG_GPIO_SYSFS=y
-# CONFIG_HAMRADIO is not set
-# CONFIG_HPET_TIMER is not set
-CONFIG_HZ=250
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_IP_MROUTE is not set
-CONFIG_IRQ_DOMAIN=y
-# CONFIG_JFFS2_SUMMARY is not set
-CONFIG_LEDS_GPIO=y
-# CONFIG_LEDS_TRIGGER_NETDEV is not set
-# CONFIG_LEDS_TRIGGER_TIMER is not set
-CONFIG_LLC=m
-CONFIG_MFD_CORE=y
-CONFIG_MFD_RDC321X=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MTRR is not set
-CONFIG_NLS=y
-CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
-# CONFIG_PCI_QUIRKS is not set
-CONFIG_PHYSICAL_START=0x100000
-CONFIG_PROCESSOR_SELECT=y
-CONFIG_RDC321X_WDT=m
-# CONFIG_SCx200 is not set
-# CONFIG_SHMEM is not set
-CONFIG_STP=m
-CONFIG_VLAN_8021Q=m
-# CONFIG_VM86 is not set
-CONFIG_X86_EXTENDED_PLATFORM=y
-# CONFIG_X86_GENERIC is not set
-CONFIG_X86_INTERNODE_CACHE_SHIFT=4
-CONFIG_X86_L1_CACHE_SHIFT=4
-# CONFIG_X86_MCE is not set
-# CONFIG_X86_PLATFORM_DEVICES is not set
-# CONFIG_X86_PPRO_FENCE is not set
-CONFIG_X86_RDC321X=y
-CONFIG_X86_REBOOTFIXUPS=y
-# CONFIG_X86_UP_APIC is not set
-# CONFIG_X86_VERBOSE_BOOTUP is not set
-# CONFIG_X86_WANT_INTEL_MID is not set
diff --git a/target/linux/x86/rdc/profiles/ar525w.mk b/target/linux/x86/rdc/profiles/ar525w.mk
deleted file mode 100644
index d38cb1f..0000000
--- a/target/linux/x86/rdc/profiles/ar525w.mk
+++ /dev/null
@@ -1,12 +0,0 @@
-#
-# Copyright (C) 2010 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-define Profile/ar525w
-  NAME:=Airlink AR525W
-  PACKAGES:=kmod-rt61-pci kmod-switch-ip17xx swconfig
-endef
-$(eval $(call Profile,ar525w))
diff --git a/target/linux/x86/rdc/profiles/bifferboard.mk b/target/linux/x86/rdc/profiles/bifferboard.mk
deleted file mode 100644
index 35fea45..0000000
--- a/target/linux/x86/rdc/profiles/bifferboard.mk
+++ /dev/null
@@ -1,13 +0,0 @@
-#
-# Copyright (C) 2010 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-define Profile/bifferboard
-	NAME:=Bifferboard
-	PACKAGES:=kmod-usb-core kmod-usb-ohci kmod-usb2 \
-		kmod-usb-storage kmod-scsi-core kmod-fs-ext4
-endef
-$(eval $(call Profile,bifferboard))
diff --git a/target/linux/x86/rdc/profiles/r8610.mk b/target/linux/x86/rdc/profiles/r8610.mk
deleted file mode 100644
index d5f8c0a..0000000
--- a/target/linux/x86/rdc/profiles/r8610.mk
+++ /dev/null
@@ -1,14 +0,0 @@
-#
-# Copyright (C) 2010 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-define Profile/r8610
-	NAME:=RDC R8610 Evaluation Board
-	PACKAGES:=kmod-usb-core kmod-usb-ohci kmod-usb2 \
-			kmod-hwmon-core kmod-hwmon-w83627hf kmod-ide-core kmod-ide-it821x \
-			kmod-rtc-core kmod-rtc-m48t86 kmod-fs-ext4
-endef
-$(eval $(call Profile,r8610))
diff --git a/target/linux/x86/rdc/profiles/sitecom.mk b/target/linux/x86/rdc/profiles/sitecom.mk
deleted file mode 100644
index e3b2981..0000000
--- a/target/linux/x86/rdc/profiles/sitecom.mk
+++ /dev/null
@@ -1,12 +0,0 @@
-#
-# Copyright (C) 2010 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-define Profile/sitecom
-	NAME:=Devices from Sitecom (WL-153, DC-230)
-	PACKAGES:=kmod-rt61-pci kmod-usb-core kmod-usb-ohci kmod-usb2
-endef
-$(eval $(call Profile,sitecom))
diff --git a/target/linux/x86/rdc/target.mk b/target/linux/x86/rdc/target.mk
deleted file mode 100644
index 9b03b15..0000000
--- a/target/linux/x86/rdc/target.mk
+++ /dev/null
@@ -1,13 +0,0 @@
-BOARDNAME:=RDC R-321x
-FEATURES:=squashfs pci usb gpio pcmcia
-MAINTAINER:=Florian Fainelli <florian@openwrt.org>
-FEATURES += broken
-
-DEFAULT_PACKAGES += kmod-llc kmod-stp kmod-bridge kmod-8021q \
-		    wpad-mini kmod-libphy kmod-r6040 kmod-input-core \
-		    kmod-input-polldev kmod-button-hotplug kmod-rdc321x-wdt
-
-define Target/Description
-        Build firmware images for RDC321x based routers
-        (e.g. Airlink101 AR525W, Linksys WRT54GR, Sitecom WL-153)
-endef
diff --git a/target/linux/x86/thincan/base-files/etc/init.d/alsa b/target/linux/x86/thincan/base-files/etc/init.d/alsa
deleted file mode 100644
index 94c6965..0000000
--- a/target/linux/x86/thincan/base-files/etc/init.d/alsa
+++ /dev/null
@@ -1,9 +0,0 @@
-#!/bin/sh /etc/rc.common
-# Copyright (C) 2006 OpenWrt.org
-START=50
-
-start() {
-	amixer set PCM 50% unmute
-	amixer set Headphone 100% unmute
-}
-
diff --git a/target/linux/x86/thincan/config-3.10 b/target/linux/x86/thincan/config-3.10
deleted file mode 100644
index 405c65b..0000000
--- a/target/linux/x86/thincan/config-3.10
+++ /dev/null
@@ -1,15 +0,0 @@
-CONFIG_8139TOO=y
-# CONFIG_8139TOO_8129 is not set
-# CONFIG_8139TOO_PIO is not set
-# CONFIG_8139TOO_TUNE_TWISTER is not set
-# CONFIG_8139_OLD_RX_RESET is not set
-CONFIG_BLK_DEV_NBD=y
-# CONFIG_EMBEDDED is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_BOOTP is not set
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_RARP is not set
-CONFIG_LOCKD=y
-CONFIG_NFS_FS=y
-CONFIG_ROOT_NFS=y
-CONFIG_SUNRPC=y
diff --git a/target/linux/x86/thincan/profiles/dbe61.mk b/target/linux/x86/thincan/profiles/dbe61.mk
deleted file mode 100644
index ee7c251..0000000
--- a/target/linux/x86/thincan/profiles/dbe61.mk
+++ /dev/null
@@ -1,25 +0,0 @@
-#
-# Copyright (C) 2006-2009 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-define Profile/DBE61
-  NAME:=DBE61
-endef
-
-define Profile/DBE61/Description
-	Compile OpenWrt for Artec ThinCan DBE61
-
-	ThinCan DBE61 is a thin-client featuring:
-	  * AMD Geode LX700
-	  * AMD CS5535 companion device
-	  * 64MB or 256MB NAND Flash or none
-	  * 128MB or 256MB DDR SDRAM
-	  * Realtek RTL8139
-
-	http://wiki.thincan.org/DBE61
-endef
-
-$(eval $(call Profile,DBE61))
diff --git a/target/linux/x86/thincan/target.mk b/target/linux/x86/thincan/target.mk
deleted file mode 100644
index c32baf9..0000000
--- a/target/linux/x86/thincan/target.mk
+++ /dev/null
@@ -1,35 +0,0 @@
-DEVICE_TYPE:=terminal
-BOARDNAME:=Artec ThinCan
-CPU_TYPE := geode
-FEATURES += broken
-
-DEFAULT_PACKAGES:=\
-	base-files \
-	busybox \
-	hotplug2 \
-	libc \
-	libgcc \
-	opkg \
-	uci \
-	udevtrigger \
-	kmod-fs-msdos \
-	kmod-fs-vfat \
-	kmod-fs-ext4 \
-	kmod-usb-core \
-	kmod-usb-ohci \
-	kmod-usb-hid \
-	kmod-usb-storage \
-	kmod-usb2 \
-	kmod-sound-core \
-	kmod-sound-cs5535audio \
-	kmod-crypto-core \
-	kmod-crypto-hw-geode \
-	kmod-crypto-ocf \
-	kmod-crypto-aes
-
-define Target/Description
-	Build firmware images for Artec ThinCan
-
-	Note that NBD, NFS, DHCP and ethernet module are built into kernel
-endef
-
diff --git a/target/linux/x86/xen_domu/base-files/etc/inittab b/target/linux/x86/xen_domu/base-files/etc/inittab
deleted file mode 100644
index 469b8a9..0000000
--- a/target/linux/x86/xen_domu/base-files/etc/inittab
+++ /dev/null
@@ -1,5 +0,0 @@
-::sysinit:/etc/init.d/rcS S boot
-::shutdown:/etc/init.d/rcS K stop
-tts/0::askfirst:/bin/ash --login
-hvc0::askfirst:/bin/ash --login
-tty1::askfirst:/bin/ash --login
diff --git a/target/linux/x86/xen_domu/base-files/lib/preinit/45_mount_xenfs b/target/linux/x86/xen_domu/base-files/lib/preinit/45_mount_xenfs
deleted file mode 100644
index 7b07605..0000000
--- a/target/linux/x86/xen_domu/base-files/lib/preinit/45_mount_xenfs
+++ /dev/null
@@ -1,11 +0,0 @@
-#!/bin/sh
-# Copyright (C) 2010 OpenWrt.org
-
-do_mount_xenfs() {
-	[ -f /etc/modules.d/??-xenfs ] && {
-		insmod $(cat /etc/modules.d/??-xenfs)
-		mount -o noatime none /proc/xen -t xenfs
-	}
-}
-
-boot_hook_add preinit_mount_root do_mount_xenfs
diff --git a/target/linux/x86/xen_domu/config-3.10 b/target/linux/x86/xen_domu/config-3.10
deleted file mode 100644
index fc86036..0000000
--- a/target/linux/x86/xen_domu/config-3.10
+++ /dev/null
@@ -1,81 +0,0 @@
-# CONFIG_APM is not set
-CONFIG_ARCH_CPU_PROBE_RELEASE=y
-CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
-# CONFIG_BOOTPARAM_HOTPLUG_CPU0 is not set
-CONFIG_CPU_RMAP=y
-# CONFIG_DEBUG_HOTPLUG_CPU0 is not set
-CONFIG_FREEZER=y
-CONFIG_GENERIC_PENDING_IRQ=y
-CONFIG_HIBERNATE_CALLBACKS=y
-# CONFIG_HIGHMEM64G is not set
-CONFIG_HOTPLUG_CPU=y
-CONFIG_HVC_DRIVER=y
-CONFIG_HVC_IRQ=y
-CONFIG_HVC_XEN=y
-CONFIG_HVC_XEN_FRONTEND=y
-CONFIG_HYPERVISOR_GUEST=y
-CONFIG_IOMMU_HELPER=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_XZ is not set
-# CONFIG_LGUEST_GUEST is not set
-# CONFIG_M486 is not set
-CONFIG_MMU_NOTIFIER=y
-CONFIG_MPENTIUM4=y
-CONFIG_MUTEX_SPIN_ON_OWNER=y
-CONFIG_NR_CPUS=4
-CONFIG_PARAVIRT=y
-CONFIG_PARAVIRT_CLOCK=y
-# CONFIG_PARAVIRT_DEBUG is not set
-CONFIG_PARAVIRT_SPINLOCKS=y
-# CONFIG_PARAVIRT_TIME_ACCOUNTING is not set
-CONFIG_PCI_XEN=y
-CONFIG_PHYS_ADDR_T_64BIT=y
-CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_PM_SLEEP_SMP=y
-CONFIG_RCU_STALL_COMMON=y
-CONFIG_RFS_ACCEL=y
-CONFIG_RPS=y
-CONFIG_SCHED_MC=y
-CONFIG_SMP=y
-CONFIG_STOP_MACHINE=y
-CONFIG_SWIOTLB=y
-CONFIG_SWIOTLB_XEN=y
-CONFIG_SYS_HYPERVISOR=y
-CONFIG_TREE_RCU=y
-CONFIG_USE_GENERIC_SMP_HELPERS=y
-# CONFIG_VMWARE_BALLOON is not set
-CONFIG_X86_32_SMP=y
-# CONFIG_X86_BIGSMP is not set
-CONFIG_X86_CMOV=y
-CONFIG_X86_CMPXCHG64=y
-CONFIG_X86_DEBUGCTLMSR=y
-CONFIG_X86_HT=y
-CONFIG_X86_INTERNODE_CACHE_SHIFT=7
-CONFIG_X86_L1_CACHE_SHIFT=7
-CONFIG_X86_MINIMUM_CPU_FAMILY=5
-CONFIG_X86_PAE=y
-CONFIG_X86_TSC=y
-CONFIG_X86_USE_PPRO_CHECKSUM=y
-CONFIG_XEN=y
-# CONFIG_XENFS is not set
-CONFIG_XEN_BALLOON=y
-CONFIG_XEN_BLKDEV_FRONTEND=y
-CONFIG_XEN_DEBUG_FS=y
-# CONFIG_XEN_DEV_EVTCHN is not set
-CONFIG_XEN_GNTDEV=m
-CONFIG_XEN_GRANT_DEV_ALLOC=m
-CONFIG_XEN_HAVE_PVMMU=y
-CONFIG_XEN_MAX_DOMAIN_MEMORY=64
-# CONFIG_XEN_NETDEV_FRONTEND is not set
-# CONFIG_XEN_PCIDEV_FRONTEND is not set
-CONFIG_XEN_PRIVCMD=m
-# CONFIG_XEN_PRIVILEGED_GUEST is not set
-CONFIG_XEN_PVHVM=y
-CONFIG_XEN_SAVE_RESTORE=y
-CONFIG_XEN_SCRUB_PAGES=y
-CONFIG_XEN_SYS_HYPERVISOR=y
-# CONFIG_XEN_WDT is not set
-CONFIG_XEN_XENBUS_FRONTEND=y
-CONFIG_XPS=y
diff --git a/target/linux/x86/xen_domu/target.mk b/target/linux/x86/xen_domu/target.mk
deleted file mode 100644
index 80bac3b..0000000
--- a/target/linux/x86/xen_domu/target.mk
+++ /dev/null
@@ -1,3 +0,0 @@
-BOARDNAME:=Xen Paravirt Guest
-DEFAULT_PACKAGES += kmod-xen-fs kmod-xen-evtchn kmod-xen-netdev kmod-xen-kbddev
-FEATURES:=display