summaryrefslogtreecommitdiff
path: root/package/utils/busybox/config/util-linux/Config.in
diff options
context:
space:
mode:
Diffstat (limited to 'package/utils/busybox/config/util-linux/Config.in')
-rw-r--r--package/utils/busybox/config/util-linux/Config.in985
1 files changed, 985 insertions, 0 deletions
diff --git a/package/utils/busybox/config/util-linux/Config.in b/package/utils/busybox/config/util-linux/Config.in
new file mode 100644
index 0000000..66751db
--- /dev/null
+++ b/package/utils/busybox/config/util-linux/Config.in
@@ -0,0 +1,985 @@
+# DO NOT EDIT. This file is generated from Config.src
+#
+# For a description of the syntax of this configuration file,
+# see scripts/kbuild/config-language.txt.
+#
+
+menu "Linux System Utilities"
+
+config BUSYBOX_CONFIG_BLOCKDEV
+ bool "blockdev"
+ default BUSYBOX_DEFAULT_BLOCKDEV
+ help
+ Performs some ioctls with block devices.
+config BUSYBOX_CONFIG_REV
+ bool "rev"
+ default BUSYBOX_DEFAULT_REV
+ help
+ Reverse lines of a file or files.
+
+config BUSYBOX_CONFIG_ACPID
+ bool "acpid"
+ default BUSYBOX_DEFAULT_ACPID
+ select BUSYBOX_CONFIG_PLATFORM_LINUX
+ help
+ acpid listens to ACPI events coming either in textual form from
+ /proc/acpi/event (though it is marked deprecated it is still widely
+ used and _is_ a standard) or in binary form from specified evdevs
+ (just use /dev/input/event*).
+
+ It parses the event to retrieve ACTION and a possible PARAMETER.
+ It then spawns /etc/acpi/<ACTION>[/<PARAMETER>] either via run-parts
+ (if the resulting path is a directory) or directly as an executable.
+
+ N.B. acpid relies on run-parts so have the latter installed.
+
+config BUSYBOX_CONFIG_FEATURE_ACPID_COMPAT
+ bool "Accept and ignore redundant options"
+ default BUSYBOX_DEFAULT_FEATURE_ACPID_COMPAT
+ depends on BUSYBOX_CONFIG_ACPID
+ help
+ Accept and ignore compatibility options -g -m -s -S -v.
+
+config BUSYBOX_CONFIG_BLKID
+ bool "blkid"
+ default BUSYBOX_DEFAULT_BLKID
+ select BUSYBOX_CONFIG_PLATFORM_LINUX
+ select BUSYBOX_CONFIG_VOLUMEID
+ help
+ Lists labels and UUIDs of all filesystems.
+ WARNING:
+ With all submodules selected, it will add ~8k to busybox.
+
+config BUSYBOX_CONFIG_FEATURE_BLKID_TYPE
+ bool "Print filesystem type"
+ default BUSYBOX_DEFAULT_FEATURE_BLKID_TYPE
+ depends on BUSYBOX_CONFIG_BLKID
+ help
+ Show TYPE="filesystem type"
+
+config BUSYBOX_CONFIG_DMESG
+ bool "dmesg"
+ default BUSYBOX_DEFAULT_DMESG
+ select BUSYBOX_CONFIG_PLATFORM_LINUX
+ help
+ dmesg is used to examine or control the kernel ring buffer. When the
+ Linux kernel prints messages to the system log, they are stored in
+ the kernel ring buffer. You can use dmesg to print the kernel's ring
+ buffer, clear the kernel ring buffer, change the size of the kernel
+ ring buffer, and change the priority level at which kernel messages
+ are also logged to the system console. Enable this option if you
+ wish to enable the 'dmesg' utility.
+
+config BUSYBOX_CONFIG_FEATURE_DMESG_PRETTY
+ bool "Pretty dmesg output"
+ default BUSYBOX_DEFAULT_FEATURE_DMESG_PRETTY
+ depends on BUSYBOX_CONFIG_DMESG
+ help
+ If you wish to scrub the syslog level from the output, say 'Y' here.
+ The syslog level is a string prefixed to every line with the form
+ "<#>".
+
+ With this option you will see:
+ # dmesg
+ Linux version 2.6.17.4 .....
+ BIOS-provided physical RAM map:
+ BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
+
+ Without this option you will see:
+ # dmesg
+ <5>Linux version 2.6.17.4 .....
+ <6>BIOS-provided physical RAM map:
+ <6> BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
+
+config BUSYBOX_CONFIG_FBSET
+ bool "fbset"
+ default BUSYBOX_DEFAULT_FBSET
+ select BUSYBOX_CONFIG_PLATFORM_LINUX
+ help
+ fbset is used to show or change the settings of a Linux frame buffer
+ device. The frame buffer device provides a simple and unique
+ interface to access a graphics display. Enable this option
+ if you wish to enable the 'fbset' utility.
+
+config BUSYBOX_CONFIG_FEATURE_FBSET_FANCY
+ bool "Turn on extra fbset options"
+ default BUSYBOX_DEFAULT_FEATURE_FBSET_FANCY
+ depends on BUSYBOX_CONFIG_FBSET
+ help
+ This option enables extended fbset options, allowing one to set the
+ framebuffer size, color depth, etc. interface to access a graphics
+ display. Enable this option if you wish to enable extended fbset
+ options.
+
+config BUSYBOX_CONFIG_FEATURE_FBSET_READMODE
+ bool "Turn on fbset readmode support"
+ default BUSYBOX_DEFAULT_FEATURE_FBSET_READMODE
+ depends on BUSYBOX_CONFIG_FBSET
+ help
+ This option allows fbset to read the video mode database stored by
+ default BUSYBOX_DEFAULT_FEATURE_FBSET_READMODE /etc/fb.modes, which can be used to set frame buffer
+ device to pre-defined video modes.
+
+config BUSYBOX_CONFIG_FDFLUSH
+ bool "fdflush"
+ default BUSYBOX_DEFAULT_FDFLUSH
+ select BUSYBOX_CONFIG_PLATFORM_LINUX
+ help
+ fdflush is only needed when changing media on slightly-broken
+ removable media drives. It is used to make Linux believe that a
+ hardware disk-change switch has been actuated, which causes Linux to
+ forget anything it has cached from the previous media. If you have
+ such a slightly-broken drive, you will need to run fdflush every time
+ you change a disk. Most people have working hardware and can safely
+ leave this disabled.
+
+config BUSYBOX_CONFIG_FDFORMAT
+ bool "fdformat"
+ default BUSYBOX_DEFAULT_FDFORMAT
+ select BUSYBOX_CONFIG_PLATFORM_LINUX
+ help
+ fdformat is used to low-level format a floppy disk.
+
+config BUSYBOX_CONFIG_FDISK
+ bool "fdisk"
+ default BUSYBOX_DEFAULT_FDISK
+ select BUSYBOX_CONFIG_PLATFORM_LINUX
+ help
+ The fdisk utility is used to divide hard disks into one or more
+ logical disks, which are generally called partitions. This utility
+ can be used to list and edit the set of partitions or BSD style
+ 'disk slices' that are defined on a hard drive.
+
+config BUSYBOX_CONFIG_FDISK_SUPPORT_LARGE_DISKS
+ bool "Support over 4GB disks"
+ default BUSYBOX_DEFAULT_FDISK_SUPPORT_LARGE_DISKS
+ depends on BUSYBOX_CONFIG_FDISK
+ depends on !BUSYBOX_CONFIG_LFS # with LFS no special code is needed
+ help
+ Enable this option to support large disks > 4GB.
+
+config BUSYBOX_CONFIG_FEATURE_FDISK_WRITABLE
+ bool "Write support"
+ default BUSYBOX_DEFAULT_FEATURE_FDISK_WRITABLE
+ depends on BUSYBOX_CONFIG_FDISK
+ help
+ Enabling this option allows you to create or change a partition table
+ and write those changes out to disk. If you leave this option
+ disabled, you will only be able to view the partition table.
+
+config BUSYBOX_CONFIG_FEATURE_AIX_LABEL
+ bool "Support AIX disklabels"
+ default BUSYBOX_DEFAULT_FEATURE_AIX_LABEL
+ depends on BUSYBOX_CONFIG_FDISK && BUSYBOX_CONFIG_FEATURE_FDISK_WRITABLE
+ help
+ Enabling this option allows you to create or change AIX disklabels.
+ Most people can safely leave this option disabled.
+
+config BUSYBOX_CONFIG_FEATURE_SGI_LABEL
+ bool "Support SGI disklabels"
+ default BUSYBOX_DEFAULT_FEATURE_SGI_LABEL
+ depends on BUSYBOX_CONFIG_FDISK && BUSYBOX_CONFIG_FEATURE_FDISK_WRITABLE
+ help
+ Enabling this option allows you to create or change SGI disklabels.
+ Most people can safely leave this option disabled.
+
+config BUSYBOX_CONFIG_FEATURE_SUN_LABEL
+ bool "Support SUN disklabels"
+ default BUSYBOX_DEFAULT_FEATURE_SUN_LABEL
+ depends on BUSYBOX_CONFIG_FDISK && BUSYBOX_CONFIG_FEATURE_FDISK_WRITABLE
+ help
+ Enabling this option allows you to create or change SUN disklabels.
+ Most people can safely leave this option disabled.
+
+config BUSYBOX_CONFIG_FEATURE_OSF_LABEL
+ bool "Support BSD disklabels"
+ default BUSYBOX_DEFAULT_FEATURE_OSF_LABEL
+ depends on BUSYBOX_CONFIG_FDISK && BUSYBOX_CONFIG_FEATURE_FDISK_WRITABLE
+ help
+ Enabling this option allows you to create or change BSD disklabels
+ and define and edit BSD disk slices.
+
+config BUSYBOX_CONFIG_FEATURE_GPT_LABEL
+ bool "Support GPT disklabels"
+ default BUSYBOX_DEFAULT_FEATURE_GPT_LABEL
+ depends on BUSYBOX_CONFIG_FDISK && BUSYBOX_CONFIG_FEATURE_FDISK_WRITABLE
+ help
+ Enabling this option allows you to view GUID Partition Table
+ disklabels.
+
+config BUSYBOX_CONFIG_FEATURE_FDISK_ADVANCED
+ bool "Support expert mode"
+ default BUSYBOX_DEFAULT_FEATURE_FDISK_ADVANCED
+ depends on BUSYBOX_CONFIG_FDISK && BUSYBOX_CONFIG_FEATURE_FDISK_WRITABLE
+ help
+ Enabling this option allows you to do terribly unsafe things like
+ define arbitrary drive geometry, move the beginning of data in a
+ partition, and similarly evil things. Unless you have a very good
+ reason you would be wise to leave this disabled.
+
+config BUSYBOX_CONFIG_FINDFS
+ bool "findfs"
+ default BUSYBOX_DEFAULT_FINDFS
+ select BUSYBOX_CONFIG_PLATFORM_LINUX
+ select BUSYBOX_CONFIG_VOLUMEID
+ help
+ Prints the name of a filesystem with given label or UUID.
+ WARNING:
+ With all submodules selected, it will add ~8k to busybox.
+
+config BUSYBOX_CONFIG_FLOCK
+ bool "flock"
+ default BUSYBOX_DEFAULT_FLOCK
+ help
+ Manage locks from shell scripts
+
+config BUSYBOX_CONFIG_FREERAMDISK
+ bool "freeramdisk"
+ default BUSYBOX_DEFAULT_FREERAMDISK
+ select BUSYBOX_CONFIG_PLATFORM_LINUX
+ help
+ Linux allows you to create ramdisks. This utility allows you to
+ delete them and completely free all memory that was used for the
+ ramdisk. For example, if you boot Linux into a ramdisk and later
+ pivot_root, you may want to free the memory that is allocated to the
+ ramdisk. If you have no use for freeing memory from a ramdisk, leave
+ this disabled.
+
+config BUSYBOX_CONFIG_FSCK_MINIX
+ bool "fsck_minix"
+ default BUSYBOX_DEFAULT_FSCK_MINIX
+ help
+ The minix filesystem is a nice, small, compact, read-write filesystem
+ with little overhead. It is not a journaling filesystem however and
+ can experience corruption if it is not properly unmounted or if the
+ power goes off in the middle of a write. This utility allows you to
+ check for and attempt to repair any corruption that occurs to a minix
+ filesystem.
+
+config BUSYBOX_CONFIG_MKFS_EXT2
+ bool "mkfs_ext2"
+ default BUSYBOX_DEFAULT_MKFS_EXT2
+ select BUSYBOX_CONFIG_PLATFORM_LINUX
+ help
+ Utility to create EXT2 filesystems.
+
+config BUSYBOX_CONFIG_MKFS_MINIX
+ bool "mkfs_minix"
+ default BUSYBOX_DEFAULT_MKFS_MINIX
+ select BUSYBOX_CONFIG_PLATFORM_LINUX
+ help
+ The minix filesystem is a nice, small, compact, read-write filesystem
+ with little overhead. If you wish to be able to create minix
+ filesystems this utility will do the job for you.
+
+config BUSYBOX_CONFIG_FEATURE_MINIX2
+ bool "Support Minix fs v2 (fsck_minix/mkfs_minix)"
+ default BUSYBOX_DEFAULT_FEATURE_MINIX2
+ depends on BUSYBOX_CONFIG_FSCK_MINIX || BUSYBOX_CONFIG_MKFS_MINIX
+ help
+ If you wish to be able to create version 2 minix filesystems, enable
+ this. If you enabled 'mkfs_minix' then you almost certainly want to
+ be using the version 2 filesystem support.
+
+config BUSYBOX_CONFIG_MKFS_REISER
+ bool "mkfs_reiser"
+ default BUSYBOX_DEFAULT_MKFS_REISER
+ select BUSYBOX_CONFIG_PLATFORM_LINUX
+ help
+ Utility to create ReiserFS filesystems.
+ Note: this applet needs a lot of testing and polishing.
+
+config BUSYBOX_CONFIG_MKFS_VFAT
+ bool "mkfs_vfat"
+ default BUSYBOX_DEFAULT_MKFS_VFAT
+ select BUSYBOX_CONFIG_PLATFORM_LINUX
+ help
+ Utility to create FAT32 filesystems.
+
+config BUSYBOX_CONFIG_GETOPT
+ bool "getopt"
+ default BUSYBOX_DEFAULT_GETOPT
+ help
+ The getopt utility is used to break up (parse) options in command
+ lines to make it easy to write complex shell scripts that also check
+ for legal (and illegal) options. If you want to write horribly
+ complex shell scripts, or use some horribly complex shell script
+ written by others, this utility may be for you. Most people will
+ wisely leave this disabled.
+
+config BUSYBOX_CONFIG_FEATURE_GETOPT_LONG
+ bool "Support option -l"
+ default BUSYBOX_DEFAULT_FEATURE_GETOPT_LONG if BUSYBOX_CONFIG_LONG_OPTS
+ depends on BUSYBOX_CONFIG_GETOPT
+ help
+ Enable support for long options (option -l).
+
+config BUSYBOX_CONFIG_HEXDUMP
+ bool "hexdump"
+ default BUSYBOX_DEFAULT_HEXDUMP
+ help
+ The hexdump utility is used to display binary data in a readable
+ way that is comparable to the output from most hex editors.
+
+config BUSYBOX_CONFIG_FEATURE_HEXDUMP_REVERSE
+ bool "Support -R, reverse of 'hexdump -Cv'"
+ default BUSYBOX_DEFAULT_FEATURE_HEXDUMP_REVERSE
+ depends on BUSYBOX_CONFIG_HEXDUMP
+ help
+ The hexdump utility is used to display binary data in an ascii
+ readable way. This option creates binary data from an ascii input.
+ NB: this option is non-standard. It's unwise to use it in scripts
+ aimed to be portable.
+
+config BUSYBOX_CONFIG_HD
+ bool "hd"
+ default BUSYBOX_DEFAULT_HD
+ depends on BUSYBOX_CONFIG_HEXDUMP
+ help
+ hd is an alias to hexdump -C.
+
+config BUSYBOX_CONFIG_HWCLOCK
+ bool "hwclock"
+ default BUSYBOX_DEFAULT_HWCLOCK
+ select BUSYBOX_CONFIG_PLATFORM_LINUX
+ help
+ The hwclock utility is used to read and set the hardware clock
+ on a system. This is primarily used to set the current time on
+ shutdown in the hardware clock, so the hardware will keep the
+ correct time when Linux is _not_ running.
+
+config BUSYBOX_CONFIG_FEATURE_HWCLOCK_LONG_OPTIONS
+ bool "Support long options (--hctosys,...)"
+ default BUSYBOX_DEFAULT_FEATURE_HWCLOCK_LONG_OPTIONS
+ depends on BUSYBOX_CONFIG_HWCLOCK && BUSYBOX_CONFIG_LONG_OPTS
+ help
+ By default, the hwclock utility only uses short options. If you
+ are overly fond of its long options, such as --hctosys, --utc, etc)
+ then enable this option.
+
+config BUSYBOX_CONFIG_FEATURE_HWCLOCK_ADJTIME_FHS
+ bool "Use FHS /var/lib/hwclock/adjtime"
+ default BUSYBOX_DEFAULT_FEATURE_HWCLOCK_ADJTIME_FHS # util-linux-ng in Fedora 13 still uses /etc/adjtime
+ depends on BUSYBOX_CONFIG_HWCLOCK
+ help
+ Starting with FHS 2.3, the adjtime state file is supposed to exist
+ at /var/lib/hwclock/adjtime instead of /etc/adjtime. If you wish
+ to use the FHS behavior, answer Y here, otherwise answer N for the
+ classic /etc/adjtime path.
+
+ pathname.com/fhs/pub/fhs-2.3.html#VARLIBHWCLOCKSTATEDIRECTORYFORHWCLO
+
+config BUSYBOX_CONFIG_IPCRM
+ bool "ipcrm"
+ default BUSYBOX_DEFAULT_IPCRM
+ help
+ The ipcrm utility allows the removal of System V interprocess
+ communication (IPC) objects and the associated data structures
+ from the system.
+
+config BUSYBOX_CONFIG_IPCS
+ bool "ipcs"
+ default BUSYBOX_DEFAULT_IPCS
+ select BUSYBOX_CONFIG_PLATFORM_LINUX
+ help
+ The ipcs utility is used to provide information on the currently
+ allocated System V interprocess (IPC) objects in the system.
+
+config BUSYBOX_CONFIG_LOSETUP
+ bool "losetup"
+ default BUSYBOX_DEFAULT_LOSETUP
+ select BUSYBOX_CONFIG_PLATFORM_LINUX
+ help
+ losetup is used to associate or detach a loop device with a regular
+ file or block device, and to query the status of a loop device. This
+ version does not currently support enabling data encryption.
+
+config BUSYBOX_CONFIG_LSPCI
+ bool "lspci"
+ default BUSYBOX_DEFAULT_LSPCI
+ #select PLATFORM_LINUX
+ help
+ lspci is a utility for displaying information about PCI buses in the
+ system and devices connected to them.
+
+ This version uses sysfs (/sys/bus/pci/devices) only.
+
+config BUSYBOX_CONFIG_LSUSB
+ bool "lsusb"
+ default BUSYBOX_DEFAULT_LSUSB
+ #select PLATFORM_LINUX
+ help
+ lsusb is a utility for displaying information about USB buses in the
+ system and devices connected to them.
+
+ This version uses sysfs (/sys/bus/usb/devices) only.
+
+config BUSYBOX_CONFIG_MDEV
+ bool "mdev"
+ default BUSYBOX_DEFAULT_MDEV
+ select BUSYBOX_CONFIG_PLATFORM_LINUX
+ help
+ mdev is a mini-udev implementation for dynamically creating device
+ nodes in the /dev directory.
+
+ For more information, please see docs/mdev.txt
+
+config BUSYBOX_CONFIG_FEATURE_MDEV_CONF
+ bool "Support /etc/mdev.conf"
+ default BUSYBOX_DEFAULT_FEATURE_MDEV_CONF
+ depends on BUSYBOX_CONFIG_MDEV
+ help
+ Add support for the mdev config file to control ownership and
+ permissions of the device nodes.
+
+ For more information, please see docs/mdev.txt
+
+config BUSYBOX_CONFIG_FEATURE_MDEV_RENAME
+ bool "Support subdirs/symlinks"
+ default BUSYBOX_DEFAULT_FEATURE_MDEV_RENAME
+ depends on BUSYBOX_CONFIG_FEATURE_MDEV_CONF
+ help
+ Add support for renaming devices and creating symlinks.
+
+ For more information, please see docs/mdev.txt
+
+config BUSYBOX_CONFIG_FEATURE_MDEV_RENAME_REGEXP
+ bool "Support regular expressions substitutions when renaming device"
+ default BUSYBOX_DEFAULT_FEATURE_MDEV_RENAME_REGEXP
+ depends on BUSYBOX_CONFIG_FEATURE_MDEV_RENAME
+ help
+ Add support for regular expressions substitutions when renaming
+ device.
+
+config BUSYBOX_CONFIG_FEATURE_MDEV_EXEC
+ bool "Support command execution at device addition/removal"
+ default BUSYBOX_DEFAULT_FEATURE_MDEV_EXEC
+ depends on BUSYBOX_CONFIG_FEATURE_MDEV_CONF
+ help
+ This adds support for an optional field to /etc/mdev.conf for
+ executing commands when devices are created/removed.
+
+ For more information, please see docs/mdev.txt
+
+config BUSYBOX_CONFIG_FEATURE_MDEV_LOAD_FIRMWARE
+ bool "Support loading of firmwares"
+ default BUSYBOX_DEFAULT_FEATURE_MDEV_LOAD_FIRMWARE
+ depends on BUSYBOX_CONFIG_MDEV
+ help
+ Some devices need to load firmware before they can be usable.
+
+ These devices will request userspace look up the files in
+ /lib/firmware/ and if it exists, send it to the kernel for
+ loading into the hardware.
+
+config BUSYBOX_CONFIG_MKSWAP
+ bool "mkswap"
+ default BUSYBOX_DEFAULT_MKSWAP
+ help
+ The mkswap utility is used to configure a file or disk partition as
+ Linux swap space. This allows Linux to use the entire file or
+ partition as if it were additional RAM, which can greatly increase
+ the capability of low-memory machines. This additional memory is
+ much slower than real RAM, but can be very helpful at preventing your
+ applications being killed by the Linux out of memory (OOM) killer.
+ Once you have created swap space using 'mkswap' you need to enable
+ the swap space using the 'swapon' utility.
+
+config BUSYBOX_CONFIG_FEATURE_MKSWAP_UUID
+ bool "UUID support"
+ default BUSYBOX_DEFAULT_FEATURE_MKSWAP_UUID
+ depends on BUSYBOX_CONFIG_MKSWAP
+ help
+ Generate swap spaces with universally unique identifiers.
+
+config BUSYBOX_CONFIG_MORE
+ bool "more"
+ default BUSYBOX_DEFAULT_MORE
+ help
+ more is a simple utility which allows you to read text one screen
+ sized page at a time. If you want to read text that is larger than
+ the screen, and you are using anything faster than a 300 baud modem,
+ you will probably find this utility very helpful. If you don't have
+ any need to reading text files, you can leave this disabled.
+
+config BUSYBOX_CONFIG_MOUNT
+ bool "mount"
+ default BUSYBOX_DEFAULT_MOUNT
+ select BUSYBOX_CONFIG_PLATFORM_LINUX
+ help
+ All files and filesystems in Unix are arranged into one big directory
+ tree. The 'mount' utility is used to graft a filesystem onto a
+ particular part of the tree. A filesystem can either live on a block
+ device, or it can be accessible over the network, as is the case with
+ NFS filesystems. Most people using BusyBox will also want to enable
+ the 'mount' utility.
+
+config BUSYBOX_CONFIG_FEATURE_MOUNT_FAKE
+ bool "Support option -f"
+ default BUSYBOX_DEFAULT_FEATURE_MOUNT_FAKE
+ depends on BUSYBOX_CONFIG_MOUNT
+ help
+ Enable support for faking a file system mount.
+
+config BUSYBOX_CONFIG_FEATURE_MOUNT_VERBOSE
+ bool "Support option -v"
+ default BUSYBOX_DEFAULT_FEATURE_MOUNT_VERBOSE
+ depends on BUSYBOX_CONFIG_MOUNT
+ help
+ Enable multi-level -v[vv...] verbose messages. Useful if you
+ debug mount problems and want to see what is exactly passed
+ to the kernel.
+
+config BUSYBOX_CONFIG_FEATURE_MOUNT_HELPERS
+ bool "Support mount helpers"
+ default BUSYBOX_DEFAULT_FEATURE_MOUNT_HELPERS
+ depends on BUSYBOX_CONFIG_MOUNT
+ help
+ Enable mounting of virtual file systems via external helpers.
+ E.g. "mount obexfs#-b00.11.22.33.44.55 /mnt" will in effect call
+ "obexfs -b00.11.22.33.44.55 /mnt"
+ Also "mount -t sometype [-o opts] fs /mnt" will try
+ "sometype [-o opts] fs /mnt" if simple mount syscall fails.
+ The idea is to use such virtual filesystems in /etc/fstab.
+
+config BUSYBOX_CONFIG_FEATURE_MOUNT_LABEL
+ bool "Support specifying devices by label or UUID"
+ default BUSYBOX_DEFAULT_FEATURE_MOUNT_LABEL
+ depends on BUSYBOX_CONFIG_MOUNT
+ select BUSYBOX_CONFIG_VOLUMEID
+ help
+ This allows for specifying a device by label or uuid, rather than by
+ name. This feature utilizes the same functionality as blkid/findfs.
+ This also enables label or uuid support for swapon.
+
+config BUSYBOX_CONFIG_FEATURE_MOUNT_NFS
+ bool "Support mounting NFS file systems"
+ default BUSYBOX_DEFAULT_FEATURE_MOUNT_NFS
+ depends on BUSYBOX_CONFIG_MOUNT
+ select BUSYBOX_CONFIG_FEATURE_HAVE_RPC
+ select BUSYBOX_CONFIG_FEATURE_SYSLOG
+ help
+ Enable mounting of NFS file systems.
+
+config BUSYBOX_CONFIG_FEATURE_MOUNT_CIFS
+ bool "Support mounting CIFS/SMB file systems"
+ default BUSYBOX_DEFAULT_FEATURE_MOUNT_CIFS
+ depends on BUSYBOX_CONFIG_MOUNT
+ help
+ Enable support for samba mounts.
+
+config BUSYBOX_CONFIG_FEATURE_MOUNT_FLAGS
+ depends on BUSYBOX_CONFIG_MOUNT
+ bool "Support lots of -o flags in mount"
+ default BUSYBOX_DEFAULT_FEATURE_MOUNT_FLAGS
+ help
+ Without this, mount only supports ro/rw/remount. With this, it
+ supports nosuid, suid, dev, nodev, exec, noexec, sync, async, atime,
+ noatime, diratime, nodiratime, loud, bind, move, shared, slave,
+ private, unbindable, rshared, rslave, rprivate, and runbindable.
+
+config BUSYBOX_CONFIG_FEATURE_MOUNT_FSTAB
+ depends on BUSYBOX_CONFIG_MOUNT
+ bool "Support /etc/fstab and -a"
+ default BUSYBOX_DEFAULT_FEATURE_MOUNT_FSTAB
+ help
+ Support mount all and looking for files in /etc/fstab.
+
+config BUSYBOX_CONFIG_PIVOT_ROOT
+ bool "pivot_root"
+ default BUSYBOX_DEFAULT_PIVOT_ROOT
+ select BUSYBOX_CONFIG_PLATFORM_LINUX
+ help
+ The pivot_root utility swaps the mount points for the root filesystem
+ with some other mounted filesystem. This allows you to do all sorts
+ of wild and crazy things with your Linux system and is far more
+ powerful than 'chroot'.
+
+ Note: This is for initrd in linux 2.4. Under initramfs (introduced
+ in linux 2.6) use switch_root instead.
+
+config BUSYBOX_CONFIG_RDATE
+ bool "rdate"
+ default BUSYBOX_DEFAULT_RDATE
+ help
+ The rdate utility allows you to synchronize the date and time of your
+ system clock with the date and time of a remote networked system using
+ the RFC868 protocol, which is built into the inetd daemon on most
+ systems.
+
+config BUSYBOX_CONFIG_RDEV
+ bool "rdev"
+ default BUSYBOX_DEFAULT_RDEV
+ help
+ Print the device node associated with the filesystem mounted at '/'.
+
+config BUSYBOX_CONFIG_READPROFILE
+ bool "readprofile"
+ default BUSYBOX_DEFAULT_READPROFILE
+ #select PLATFORM_LINUX
+ help
+ This allows you to parse /proc/profile for basic profiling.
+
+config BUSYBOX_CONFIG_RTCWAKE
+ bool "rtcwake"
+ default BUSYBOX_DEFAULT_RTCWAKE
+ select BUSYBOX_CONFIG_PLATFORM_LINUX
+ help
+ Enter a system sleep state until specified wakeup time.
+
+config BUSYBOX_CONFIG_SCRIPT
+ bool "script"
+ default BUSYBOX_DEFAULT_SCRIPT
+ help
+ The script makes typescript of terminal session.
+
+config BUSYBOX_CONFIG_SCRIPTREPLAY
+ bool "scriptreplay"
+ default BUSYBOX_DEFAULT_SCRIPTREPLAY
+ help
+ This program replays a typescript, using timing information
+ given by script -t.
+
+config BUSYBOX_CONFIG_SETARCH
+ bool "setarch"
+ default BUSYBOX_DEFAULT_SETARCH
+ select BUSYBOX_CONFIG_PLATFORM_LINUX
+ help
+ The linux32 utility is used to create a 32bit environment for the
+ specified program (usually a shell). It only makes sense to have
+ this util on a system that supports both 64bit and 32bit userland
+ (like amd64/x86, ppc64/ppc, sparc64/sparc, etc...).
+
+config BUSYBOX_CONFIG_SWAPONOFF
+ bool "swaponoff"
+ default BUSYBOX_DEFAULT_SWAPONOFF
+ select BUSYBOX_CONFIG_PLATFORM_LINUX
+ help
+ This option enables both the 'swapon' and the 'swapoff' utilities.
+ Once you have created some swap space using 'mkswap', you also need
+ to enable your swap space with the 'swapon' utility. The 'swapoff'
+ utility is used, typically at system shutdown, to disable any swap
+ space. If you are not using any swap space, you can leave this
+ option disabled.
+
+config BUSYBOX_CONFIG_FEATURE_SWAPON_PRI
+ bool "Support priority option -p"
+ default BUSYBOX_DEFAULT_FEATURE_SWAPON_PRI
+ depends on BUSYBOX_CONFIG_SWAPONOFF
+ help
+ Enable support for setting swap device priority in swapon.
+
+config BUSYBOX_CONFIG_SWITCH_ROOT
+ bool "switch_root"
+ default BUSYBOX_DEFAULT_SWITCH_ROOT
+ select BUSYBOX_CONFIG_PLATFORM_LINUX
+ help
+ The switch_root utility is used from initramfs to select a new
+ root device. Under initramfs, you have to use this instead of
+ pivot_root. (Stop reading here if you don't care why.)
+
+ Booting with initramfs extracts a gzipped cpio archive into rootfs
+ (which is a variant of ramfs/tmpfs). Because rootfs can't be moved
+ or unmounted*, pivot_root will not work from initramfs. Instead,
+ switch_root deletes everything out of rootfs (including itself),
+ does a mount --move that overmounts rootfs with the new root, and
+ then execs the specified init program.
+
+ * Because the Linux kernel uses rootfs internally as the starting
+ and ending point for searching through the kernel's doubly linked
+ list of active mount points. That's why.
+
+config BUSYBOX_CONFIG_UMOUNT
+ bool "umount"
+ default BUSYBOX_DEFAULT_UMOUNT
+ select BUSYBOX_CONFIG_PLATFORM_LINUX
+ help
+ When you want to remove a mounted filesystem from its current mount
+ point, for example when you are shutting down the system, the
+ 'umount' utility is the tool to use. If you enabled the 'mount'
+ utility, you almost certainly also want to enable 'umount'.
+
+config BUSYBOX_CONFIG_FEATURE_UMOUNT_ALL
+ bool "Support option -a"
+ default BUSYBOX_DEFAULT_FEATURE_UMOUNT_ALL
+ depends on BUSYBOX_CONFIG_UMOUNT
+ help
+ Support -a option to unmount all currently mounted filesystems.
+
+comment "Common options for mount/umount"
+ depends on BUSYBOX_CONFIG_MOUNT || BUSYBOX_CONFIG_UMOUNT
+
+config BUSYBOX_CONFIG_FEATURE_MOUNT_LOOP
+ bool "Support loopback mounts"
+ default BUSYBOX_DEFAULT_FEATURE_MOUNT_LOOP
+ depends on BUSYBOX_CONFIG_MOUNT || BUSYBOX_CONFIG_UMOUNT
+ help
+ Enabling this feature allows automatic mounting of files (containing
+ filesystem images) via the linux kernel's loopback devices.
+ The mount command will detect you are trying to mount a file instead
+ of a block device, and transparently associate the file with a
+ loopback device. The umount command will also free that loopback
+ device.
+
+ You can still use the 'losetup' utility (to manually associate files
+ with loop devices) if you need to do something advanced, such as
+ specify an offset or cryptographic options to the loopback device.
+ (If you don't want umount to free the loop device, use "umount -D".)
+
+config BUSYBOX_CONFIG_FEATURE_MOUNT_LOOP_CREATE
+ bool "Create new loopback devices if needed"
+ default BUSYBOX_DEFAULT_FEATURE_MOUNT_LOOP_CREATE
+ depends on BUSYBOX_CONFIG_FEATURE_MOUNT_LOOP
+ help
+ Linux kernels >= 2.6.24 support unlimited loopback devices. They are
+ allocated for use when trying to use a loop device. The loop device
+ must however exist.
+
+ This feature lets mount to try to create next /dev/loopN device
+ if it does not find a free one.
+
+config BUSYBOX_CONFIG_FEATURE_MTAB_SUPPORT
+ bool "Support for the old /etc/mtab file"
+ default BUSYBOX_DEFAULT_FEATURE_MTAB_SUPPORT
+ depends on BUSYBOX_CONFIG_MOUNT || BUSYBOX_CONFIG_UMOUNT
+ select BUSYBOX_CONFIG_FEATURE_MOUNT_FAKE
+ help
+ Historically, Unix systems kept track of the currently mounted
+ partitions in the file "/etc/mtab". These days, the kernel exports
+ the list of currently mounted partitions in "/proc/mounts", rendering
+ the old mtab file obsolete. (In modern systems, /etc/mtab should be
+ a symlink to /proc/mounts.)
+
+ The only reason to have mount maintain an /etc/mtab file itself is if
+ your stripped-down embedded system does not have a /proc directory.
+ If you must use this, keep in mind it's inherently brittle (for
+ example a mount under chroot won't update it), can't handle modern
+ features like separate per-process filesystem namespaces, requires
+ that your /etc directory be writable, tends to get easily confused
+ by --bind or --move mounts, won't update if you rename a directory
+ that contains a mount point, and so on. (In brief: avoid.)
+
+ About the only reason to use this is if you've removed /proc from
+ your kernel.
+
+config BUSYBOX_CONFIG_VOLUMEID
+ bool #No description makes it a hidden option
+ default BUSYBOX_DEFAULT_VOLUMEID
+
+menu "Filesystem/Volume identification"
+ depends on BUSYBOX_CONFIG_VOLUMEID
+
+config BUSYBOX_CONFIG_FEATURE_VOLUMEID_EXT
+ bool "Ext filesystem"
+ default BUSYBOX_DEFAULT_FEATURE_VOLUMEID_EXT
+ depends on BUSYBOX_CONFIG_VOLUMEID
+ help
+ TODO
+
+config BUSYBOX_CONFIG_FEATURE_VOLUMEID_BTRFS
+ bool "btrfs filesystem"
+ default BUSYBOX_DEFAULT_FEATURE_VOLUMEID_BTRFS
+ depends on BUSYBOX_CONFIG_VOLUMEID
+ help
+ TODO
+
+config BUSYBOX_CONFIG_FEATURE_VOLUMEID_REISERFS
+ bool "Reiser filesystem"
+ default BUSYBOX_DEFAULT_FEATURE_VOLUMEID_REISERFS
+ depends on BUSYBOX_CONFIG_VOLUMEID
+ help
+ TODO
+
+config BUSYBOX_CONFIG_FEATURE_VOLUMEID_FAT
+ bool "fat filesystem"
+ default BUSYBOX_DEFAULT_FEATURE_VOLUMEID_FAT
+ depends on BUSYBOX_CONFIG_VOLUMEID
+ help
+ TODO
+
+config BUSYBOX_CONFIG_FEATURE_VOLUMEID_HFS
+ bool "hfs filesystem"
+ default BUSYBOX_DEFAULT_FEATURE_VOLUMEID_HFS
+ depends on BUSYBOX_CONFIG_VOLUMEID
+ help
+ TODO
+
+config BUSYBOX_CONFIG_FEATURE_VOLUMEID_JFS
+ bool "jfs filesystem"
+ default BUSYBOX_DEFAULT_FEATURE_VOLUMEID_JFS
+ depends on BUSYBOX_CONFIG_VOLUMEID
+ help
+ TODO
+
+### config FEATURE_VOLUMEID_UFS
+### bool "ufs filesystem"
+### default y
+### depends on VOLUMEID
+### help
+### TODO
+
+config BUSYBOX_CONFIG_FEATURE_VOLUMEID_XFS
+ bool "xfs filesystem"
+ default BUSYBOX_DEFAULT_FEATURE_VOLUMEID_XFS
+ depends on BUSYBOX_CONFIG_VOLUMEID
+ help
+ TODO
+
+config BUSYBOX_CONFIG_FEATURE_VOLUMEID_NTFS
+ bool "ntfs filesystem"
+ default BUSYBOX_DEFAULT_FEATURE_VOLUMEID_NTFS
+ depends on BUSYBOX_CONFIG_VOLUMEID
+ help
+ TODO
+
+config BUSYBOX_CONFIG_FEATURE_VOLUMEID_ISO9660
+ bool "iso9660 filesystem"
+ default BUSYBOX_DEFAULT_FEATURE_VOLUMEID_ISO9660
+ depends on BUSYBOX_CONFIG_VOLUMEID
+ help
+ TODO
+
+config BUSYBOX_CONFIG_FEATURE_VOLUMEID_UDF
+ bool "udf filesystem"
+ default BUSYBOX_DEFAULT_FEATURE_VOLUMEID_UDF
+ depends on BUSYBOX_CONFIG_VOLUMEID
+ help
+ TODO
+
+config BUSYBOX_CONFIG_FEATURE_VOLUMEID_LUKS
+ bool "luks filesystem"
+ default BUSYBOX_DEFAULT_FEATURE_VOLUMEID_LUKS
+ depends on BUSYBOX_CONFIG_VOLUMEID
+ help
+ TODO
+
+config BUSYBOX_CONFIG_FEATURE_VOLUMEID_LINUXSWAP
+ bool "linux swap filesystem"
+ default BUSYBOX_DEFAULT_FEATURE_VOLUMEID_LINUXSWAP
+ depends on BUSYBOX_CONFIG_VOLUMEID
+ help
+ TODO
+
+### config FEATURE_VOLUMEID_LVM
+### bool "lvm"
+### default y
+### depends on VOLUMEID
+### help
+### TODO
+
+config BUSYBOX_CONFIG_FEATURE_VOLUMEID_CRAMFS
+ bool "cramfs filesystem"
+ default BUSYBOX_DEFAULT_FEATURE_VOLUMEID_CRAMFS
+ depends on BUSYBOX_CONFIG_VOLUMEID
+ help
+ TODO
+
+### config FEATURE_VOLUMEID_HPFS
+### bool "hpfs filesystem"
+### default y
+### depends on VOLUMEID
+### help
+### TODO
+
+config BUSYBOX_CONFIG_FEATURE_VOLUMEID_ROMFS
+ bool "romfs filesystem"
+ default BUSYBOX_DEFAULT_FEATURE_VOLUMEID_ROMFS
+ depends on BUSYBOX_CONFIG_VOLUMEID
+ help
+ TODO
+
+config BUSYBOX_CONFIG_FEATURE_VOLUMEID_SYSV
+ bool "sysv filesystem"
+ default BUSYBOX_DEFAULT_FEATURE_VOLUMEID_SYSV
+ depends on BUSYBOX_CONFIG_VOLUMEID
+ help
+ TODO
+
+### config FEATURE_VOLUMEID_MINIX
+### bool "minix filesystem"
+### default y
+### depends on VOLUMEID
+### help
+### TODO
+
+### These only detect partition tables - not used (yet?)
+### config FEATURE_VOLUMEID_MAC
+### bool "mac filesystem"
+### default y
+### depends on VOLUMEID
+### help
+### TODO
+###
+### config FEATURE_VOLUMEID_MSDOS
+### bool "msdos filesystem"
+### default y
+### depends on VOLUMEID
+### help
+### TODO
+
+config BUSYBOX_CONFIG_FEATURE_VOLUMEID_OCFS2
+ bool "ocfs2 filesystem"
+ default BUSYBOX_DEFAULT_FEATURE_VOLUMEID_OCFS2
+ depends on BUSYBOX_CONFIG_VOLUMEID
+ help
+ TODO
+
+### config FEATURE_VOLUMEID_HIGHPOINTRAID
+### bool "highpoint raid"
+### default y
+### depends on VOLUMEID
+### help
+### TODO
+
+### config FEATURE_VOLUMEID_ISWRAID
+### bool "intel raid"
+### default y
+### depends on VOLUMEID
+### help
+### TODO
+
+### config FEATURE_VOLUMEID_LSIRAID
+### bool "lsi raid"
+### default y
+### depends on VOLUMEID
+### help
+### TODO
+
+### config FEATURE_VOLUMEID_VIARAID
+### bool "via raid"
+### default y
+### depends on VOLUMEID
+### help
+### TODO
+
+### config FEATURE_VOLUMEID_SILICONRAID
+### bool "silicon raid"
+### default y
+### depends on VOLUMEID
+### help
+### TODO
+
+### config FEATURE_VOLUMEID_NVIDIARAID
+### bool "nvidia raid"
+### default y
+### depends on VOLUMEID
+### help
+### TODO
+
+### config FEATURE_VOLUMEID_PROMISERAID
+### bool "promise raid"
+### default y
+### depends on VOLUMEID
+### help
+### TODO
+
+config BUSYBOX_CONFIG_FEATURE_VOLUMEID_LINUXRAID
+ bool "linuxraid"
+ default BUSYBOX_DEFAULT_FEATURE_VOLUMEID_LINUXRAID
+ depends on BUSYBOX_CONFIG_VOLUMEID
+ help
+ TODO
+
+endmenu
+
+endmenu