summaryrefslogtreecommitdiff
path: root/target/linux/ramips/patches-3.10/0005-DT-Add-documentation-for-gpio-ralink.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/ramips/patches-3.10/0005-DT-Add-documentation-for-gpio-ralink.patch')
-rw-r--r--target/linux/ramips/patches-3.10/0005-DT-Add-documentation-for-gpio-ralink.patch59
1 files changed, 0 insertions, 59 deletions
diff --git a/target/linux/ramips/patches-3.10/0005-DT-Add-documentation-for-gpio-ralink.patch b/target/linux/ramips/patches-3.10/0005-DT-Add-documentation-for-gpio-ralink.patch
deleted file mode 100644
index a6a6b69..0000000
--- a/target/linux/ramips/patches-3.10/0005-DT-Add-documentation-for-gpio-ralink.patch
+++ /dev/null
@@ -1,59 +0,0 @@
-From ad68c2865b360f1b637432b4cbcaaf101d2687b9 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Sun, 28 Jul 2013 19:45:30 +0200
-Subject: [PATCH 05/25] DT: Add documentation for gpio-ralink
-
-Describe gpio-ralink binding.
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
-Cc: linux-mips@linux-mips.org
-Cc: devicetree@vger.kernel.org
-Cc: linux-gpio@vger.kernel.org
----
- .../devicetree/bindings/gpio/gpio-ralink.txt | 40 ++++++++++++++++++++
- 1 file changed, 40 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/gpio/gpio-ralink.txt
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/gpio/gpio-ralink.txt
-@@ -0,0 +1,40 @@
-+Ralink SoC GPIO controller bindings
-+
-+Required properties:
-+- compatible:
-+ - "ralink,rt2880-gpio" for Ralink controllers
-+- #gpio-cells : Should be two.
-+ - first cell is the pin number
-+ - second cell is used to specify optional parameters (unused)
-+- gpio-controller : Marks the device node as a GPIO controller
-+- reg : Physical base address and length of the controller's registers
-+- interrupt-parent: phandle to the INTC device node
-+- interrupts : Specify the INTC interrupt number
-+- ralink,num-gpios : Specify the number of GPIOs
-+- ralink,register-map : The register layout depends on the GPIO bank and actual
-+ SoC type. Register offsets need to be in this order.
-+ [ INT, EDGE, RENA, FENA, DATA, DIR, POL, SET, RESET, TOGGLE ]
-+
-+Optional properties:
-+- ralink,gpio-base : Specify the GPIO chips base number
-+
-+Example:
-+
-+ gpio0: gpio@600 {
-+ compatible = "ralink,rt5350-gpio", "ralink,rt2880-gpio";
-+
-+ #gpio-cells = <2>;
-+ gpio-controller;
-+
-+ reg = <0x600 0x34>;
-+
-+ interrupt-parent = <&intc>;
-+ interrupts = <6>;
-+
-+ ralink,gpio-base = <0>;
-+ ralink,num-gpios = <24>;
-+ ralink,register-map = [ 00 04 08 0c
-+ 20 24 28 2c
-+ 30 34 ];
-+
-+ };