summaryrefslogtreecommitdiff
path: root/target/linux/ramips/patches-3.10/0210-MIPS-ralink-add-MT7621-pcie-driver.patch
blob: 8dae5b3e594ef3ddaf95247d4b82f7f4176bc976 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
730
731
732
733
734
735
736
737
738
739
740
741
742
743
744
745
746
747
748
749
750
751
752
753
754
755
756
757
758
759
760
761
762
763
764
765
766
767
768
769
770
771
772
773
774
775
776
777
778
779
780
781
782
783
784
785
786
787
788
789
790
791
792
793
794
795
796
797
798
799
800
801
802
803
804
805
806
807
808
809
810
811
812
813
814
815
816
817
818
819
820
821
822
From 6541090161342ef11cf319a7471aeb6769e20c2c Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Sun, 16 Mar 2014 05:22:39 +0000
Subject: [PATCH 210/215] MIPS: ralink: add MT7621 pcie driver

Signed-off-by: John Crispin <blogic@openwrt.org>
---
 arch/mips/pci/Makefile     |    1 +
 arch/mips/pci/pci-mt7621.c |  797 ++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 798 insertions(+)
 create mode 100644 arch/mips/pci/pci-mt7621.c

--- a/arch/mips/pci/Makefile
+++ b/arch/mips/pci/Makefile
@@ -42,6 +42,7 @@ obj-$(CONFIG_SNI_RM)		+= fixup-sni.o ops
 obj-$(CONFIG_LANTIQ)		+= fixup-lantiq.o
 obj-$(CONFIG_PCI_LANTIQ)	+= pci-lantiq.o ops-lantiq.o
 obj-$(CONFIG_SOC_MT7620)	+= pci-mt7620a.o
+obj-$(CONFIG_SOC_MT7621)	+= pci-mt7621.o
 obj-$(CONFIG_SOC_RT2880)	+= pci-rt2880.o
 obj-$(CONFIG_SOC_RT3883)	+= pci-rt3883.o
 obj-$(CONFIG_TANBAC_TB0219)	+= fixup-tb0219.o
--- /dev/null
+++ b/arch/mips/pci/pci-mt7621.c
@@ -0,0 +1,797 @@
+/**************************************************************************
+ *
+ *  BRIEF MODULE DESCRIPTION
+ *     PCI init for Ralink RT2880 solution
+ *
+ *  Copyright 2007 Ralink Inc. (bruce_chang@ralinktech.com.tw)
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ *
+ **************************************************************************
+ * May 2007 Bruce Chang
+ * Initial Release
+ *
+ * May 2009 Bruce Chang
+ * support RT2880/RT3883 PCIe
+ *
+ * May 2011 Bruce Chang
+ * support RT6855/MT7620 PCIe
+ *
+ **************************************************************************
+ */
+
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/version.h>
+#include <asm/pci.h>
+#include <asm/io.h>
+//#include <asm/mach-ralink/eureka_ep430.h>
+#include <linux/init.h>
+#include <linux/mod_devicetable.h>
+#include <linux/delay.h>
+//#include <asm/rt2880/surfboardint.h>
+
+#include <ralink_regs.h>
+
+extern void pcie_phy_init(void);
+extern void chk_phy_pll(void);
+
+/*
+ * These functions and structures provide the BIOS scan and mapping of the PCI
+ * devices.
+ */
+
+#define CONFIG_PCIE_PORT0
+#define CONFIG_PCIE_PORT1
+#define CONFIG_PCIE_PORT2
+#define RALINK_PCIE0_CLK_EN             (1<<24)
+#define RALINK_PCIE1_CLK_EN             (1<<25)
+#define RALINK_PCIE2_CLK_EN             (1<<26)
+
+#define RALINK_PCI_CONFIG_ADDR                         0x20
+#define RALINK_PCI_CONFIG_DATA_VIRTUAL_REG     0x24
+#define SURFBOARDINT_PCIE0       12      /* PCIE0 */
+#define RALINK_INT_PCIE0         SURFBOARDINT_PCIE0
+#define RALINK_INT_PCIE1         SURFBOARDINT_PCIE1
+#define RALINK_INT_PCIE2         SURFBOARDINT_PCIE2
+#define SURFBOARDINT_PCIE1       32     /* PCIE1 */
+#define SURFBOARDINT_PCIE2       33     /* PCIE2 */
+#define RALINK_PCI_MEMBASE              *(volatile u32 *)(RALINK_PCI_BASE + 0x0028)
+#define RALINK_PCI_IOBASE               *(volatile u32 *)(RALINK_PCI_BASE + 0x002C)
+#define RALINK_PCIE0_RST                (1<<24)
+#define RALINK_PCIE1_RST                (1<<25)
+#define RALINK_PCIE2_RST                (1<<26)
+#define RALINK_SYSCTL_BASE              0xBE000000
+
+#define RALINK_PCI_PCICFG_ADDR          *(volatile u32 *)(RALINK_PCI_BASE + 0x0000)
+#define RALINK_PCI_PCIMSK_ADDR          *(volatile u32 *)(RALINK_PCI_BASE + 0x000C)
+#define RALINK_PCI_BASE                 0xBE140000
+
+#define RALINK_PCIEPHY_P0P1_CTL_OFFSET (RALINK_PCI_BASE + 0x9000)
+#define RT6855_PCIE0_OFFSET     0x2000
+#define RT6855_PCIE1_OFFSET     0x3000
+#define RT6855_PCIE2_OFFSET     0x4000
+
+#define RALINK_PCI0_BAR0SETUP_ADDR      *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0010)
+#define RALINK_PCI0_IMBASEBAR0_ADDR     *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0018)
+#define RALINK_PCI0_ID                  *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0030)
+#define RALINK_PCI0_CLASS               *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0034)
+#define RALINK_PCI0_SUBID               *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0038)
+#define RALINK_PCI0_STATUS              *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0050)
+#define RALINK_PCI0_DERR                *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0060)
+#define RALINK_PCI0_ECRC                *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0064)
+
+#define RALINK_PCI1_BAR0SETUP_ADDR      *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0010)
+#define RALINK_PCI1_IMBASEBAR0_ADDR     *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0018)
+#define RALINK_PCI1_ID                  *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0030)
+#define RALINK_PCI1_CLASS               *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0034)
+#define RALINK_PCI1_SUBID               *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0038)
+#define RALINK_PCI1_STATUS              *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0050)
+#define RALINK_PCI1_DERR                *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0060)
+#define RALINK_PCI1_ECRC                *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0064)
+
+#define RALINK_PCI2_BAR0SETUP_ADDR      *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE2_OFFSET + 0x0010)
+#define RALINK_PCI2_IMBASEBAR0_ADDR     *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE2_OFFSET + 0x0018)
+#define RALINK_PCI2_ID                  *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE2_OFFSET + 0x0030)
+#define RALINK_PCI2_CLASS               *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE2_OFFSET + 0x0034)
+#define RALINK_PCI2_SUBID               *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE2_OFFSET + 0x0038)
+#define RALINK_PCI2_STATUS              *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE2_OFFSET + 0x0050)
+#define RALINK_PCI2_DERR                *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE2_OFFSET + 0x0060)
+#define RALINK_PCI2_ECRC                *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE2_OFFSET + 0x0064)
+
+#define RALINK_PCIEPHY_P0P1_CTL_OFFSET  (RALINK_PCI_BASE + 0x9000)
+#define RALINK_PCIEPHY_P2_CTL_OFFSET    (RALINK_PCI_BASE + 0xA000)
+
+
+#define MV_WRITE(ofs, data)  \
+        *(volatile u32 *)(RALINK_PCI_BASE+(ofs)) = cpu_to_le32(data)
+#define MV_READ(ofs, data)   \
+	        *(data) = le32_to_cpu(*(volatile u32 *)(RALINK_PCI_BASE+(ofs)))
+#define MV_READ_DATA(ofs)    \
+		        le32_to_cpu(*(volatile u32 *)(RALINK_PCI_BASE+(ofs)))
+
+#define MV_WRITE_16(ofs, data)  \
+        *(volatile u16 *)(RALINK_PCI_BASE+(ofs)) = cpu_to_le16(data)
+#define MV_READ_16(ofs, data)   \
+	        *(data) = le16_to_cpu(*(volatile u16 *)(RALINK_PCI_BASE+(ofs)))
+
+#define MV_WRITE_8(ofs, data)  \
+        *(volatile u8 *)(RALINK_PCI_BASE+(ofs)) = data
+#define MV_READ_8(ofs, data)   \
+	        *(data) = *(volatile u8 *)(RALINK_PCI_BASE+(ofs))
+
+
+
+#define RALINK_PCI_MM_MAP_BASE	0x60000000
+#define RALINK_PCI_IO_MAP_BASE	0x1e160000
+
+#define RALINK_SYSTEM_CONTROL_BASE	0xbe000000
+#define GPIO_PERST
+#define ASSERT_SYSRST_PCIE(val)		do {	\
+						if (*(unsigned int *)(0xbe00000c) == 0x00030101)	\
+							RALINK_RSTCTRL |= val;	\
+						else	\
+							RALINK_RSTCTRL &= ~val;	\
+					} while(0)
+#define DEASSERT_SYSRST_PCIE(val) 	do {	\
+						if (*(unsigned int *)(0xbe00000c) == 0x00030101)	\
+							RALINK_RSTCTRL &= ~val;	\
+						else	\
+							RALINK_RSTCTRL |= val;	\
+					} while(0)
+#define RALINK_SYSCFG1			*(unsigned int *)(RALINK_SYSTEM_CONTROL_BASE + 0x14)
+#define RALINK_CLKCFG1			*(unsigned int *)(RALINK_SYSTEM_CONTROL_BASE + 0x30)
+#define RALINK_RSTCTRL			*(unsigned int *)(RALINK_SYSTEM_CONTROL_BASE + 0x34)
+#define RALINK_GPIOMODE			*(unsigned int *)(RALINK_SYSTEM_CONTROL_BASE + 0x60)
+#define RALINK_PCIE_CLK_GEN		*(unsigned int *)(RALINK_SYSTEM_CONTROL_BASE + 0x7c)
+#define RALINK_PCIE_CLK_GEN1		*(unsigned int *)(RALINK_SYSTEM_CONTROL_BASE + 0x80)
+#define PPLL_CFG1			*(unsigned int *)(RALINK_SYSTEM_CONTROL_BASE + 0x9c)
+#define PPLL_DRV			*(unsigned int *)(RALINK_SYSTEM_CONTROL_BASE + 0xa0)
+//RALINK_SYSCFG1 bit
+#define RALINK_PCI_HOST_MODE_EN		(1<<7)
+#define RALINK_PCIE_RC_MODE_EN		(1<<8)
+//RALINK_RSTCTRL bit
+#define RALINK_PCIE_RST			(1<<23)
+#define RALINK_PCI_RST			(1<<24)
+//RALINK_CLKCFG1 bit
+#define RALINK_PCI_CLK_EN		(1<<19)
+#define RALINK_PCIE_CLK_EN		(1<<21)
+//RALINK_GPIOMODE bit
+#define PCI_SLOTx2			(1<<11)
+#define PCI_SLOTx1			(2<<11)
+//MTK PCIE PLL bit
+#define PDRV_SW_SET			(1<<31)
+#define LC_CKDRVPD_			(1<<19)
+
+#define MEMORY_BASE 0x0
+int pcie_link_status = 0;
+
+void __inline__ read_config(unsigned long bus, unsigned long dev, unsigned long func, unsigned long reg, unsigned long *val);
+void __inline__ write_config(unsigned long bus, unsigned long dev, unsigned long func, unsigned long reg, unsigned long val);
+
+#define PCI_ACCESS_READ_1  0
+#define PCI_ACCESS_READ_2  1
+#define PCI_ACCESS_READ_4  2
+#define PCI_ACCESS_WRITE_1 3
+#define PCI_ACCESS_WRITE_2 4
+#define PCI_ACCESS_WRITE_4 5
+
+static int config_access(unsigned char access_type, struct pci_bus *bus,
+			unsigned int devfn, unsigned int where, u32 * data)
+{
+	unsigned int slot = PCI_SLOT(devfn);
+	u8 func = PCI_FUNC(devfn);
+	uint32_t address_reg, data_reg;
+	unsigned int address;
+
+	address_reg = RALINK_PCI_CONFIG_ADDR;
+	data_reg = RALINK_PCI_CONFIG_DATA_VIRTUAL_REG;
+
+	address = (((where&0xF00)>>8)<<24) |(bus->number << 16) | (slot << 11) | (func << 8) | (where & 0xfc) | 0x80000000;
+	MV_WRITE(address_reg, address);
+
+	switch(access_type) {
+	case PCI_ACCESS_WRITE_1:
+		MV_WRITE_8(data_reg+(where&0x3), *data);
+		break;
+	case PCI_ACCESS_WRITE_2:
+		MV_WRITE_16(data_reg+(where&0x3), *data);
+		break;
+	case PCI_ACCESS_WRITE_4:
+		MV_WRITE(data_reg, *data);
+		break;
+	case PCI_ACCESS_READ_1:
+		MV_READ_8( data_reg+(where&0x3), data);
+		break;
+	case PCI_ACCESS_READ_2:
+		MV_READ_16(data_reg+(where&0x3), data);
+		break;
+	case PCI_ACCESS_READ_4:
+		MV_READ(data_reg, data);
+		break;
+	default:
+		printk("no specify access type\n");
+		break;
+	}
+	return 0;
+}
+
+static int
+read_config_byte(struct pci_bus *bus, unsigned int devfn, int where, u8 * val)
+{
+	return config_access(PCI_ACCESS_READ_1, bus, devfn, (unsigned int)where, (u32 *)val);
+}
+
+static int
+read_config_word(struct pci_bus *bus, unsigned int devfn, int where, u16 * val)
+{
+	return config_access(PCI_ACCESS_READ_2, bus, devfn, (unsigned int)where, (u32 *)val);
+}
+
+static int
+read_config_dword(struct pci_bus *bus, unsigned int devfn, int where, u32 * val)
+{
+	return config_access(PCI_ACCESS_READ_4, bus, devfn, (unsigned int)where, (u32 *)val);
+}
+
+static int
+write_config_byte(struct pci_bus *bus, unsigned int devfn, int where, u8 val)
+{
+	if (config_access(PCI_ACCESS_WRITE_1, bus, devfn, (unsigned int)where, (u32 *)&val))
+		return -1;
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static int
+write_config_word(struct pci_bus *bus, unsigned int devfn, int where, u16 val)
+{
+	if (config_access(PCI_ACCESS_WRITE_2, bus, devfn, where, (u32 *)&val))
+		return -1;
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static int
+write_config_dword(struct pci_bus *bus, unsigned int devfn, int where, u32 val)
+{
+	if (config_access(PCI_ACCESS_WRITE_4, bus, devfn, where, &val))
+		return -1;
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+
+static int
+pci_config_read(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 * val)
+{
+	switch (size) {
+	case 1:
+		return read_config_byte(bus, devfn, where, (u8 *) val);
+	case 2:
+		return read_config_word(bus, devfn, where, (u16 *) val);
+	default:
+		return read_config_dword(bus, devfn, where, val);
+	}
+}
+
+static int
+pci_config_write(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 val)
+{
+	switch (size) {
+	case 1:
+		return write_config_byte(bus, devfn, where, (u8) val);
+	case 2:
+		return write_config_word(bus, devfn, where, (u16) val);
+	default:
+		return write_config_dword(bus, devfn, where, val);
+	}
+}
+
+struct pci_ops rt2880_pci_ops= {
+	.read		=  pci_config_read,
+	.write		= pci_config_write,
+};
+
+static struct resource rt2880_res_pci_mem1 = {
+	.name		= "PCI MEM1",
+	.start		= RALINK_PCI_MM_MAP_BASE,
+	.end		= (u32)((RALINK_PCI_MM_MAP_BASE + (unsigned char *)0x0fffffff)),
+	.flags		= IORESOURCE_MEM,
+};
+static struct resource rt2880_res_pci_io1 = {
+	.name		= "PCI I/O1",
+	.start		= RALINK_PCI_IO_MAP_BASE,
+	.end		= (u32)((RALINK_PCI_IO_MAP_BASE + (unsigned char *)0x0ffff)),
+	.flags		= IORESOURCE_IO,
+};
+
+struct pci_controller rt2880_controller = {
+	.pci_ops	= &rt2880_pci_ops,
+	.mem_resource	= &rt2880_res_pci_mem1,
+	.io_resource	= &rt2880_res_pci_io1,
+	.mem_offset	= 0x00000000UL,
+	.io_offset	= 0x00000000UL,
+	.io_map_base	= 0xa0000000,
+};
+
+void __inline__
+read_config(unsigned long bus, unsigned long dev, unsigned long func, unsigned long reg, unsigned long *val)
+{
+	unsigned int address_reg, data_reg, address;
+
+	address_reg = RALINK_PCI_CONFIG_ADDR;
+        data_reg = RALINK_PCI_CONFIG_DATA_VIRTUAL_REG;
+	address = (((reg & 0xF00)>>8)<<24) | (bus << 16) | (dev << 11) | (func << 8) | (reg & 0xfc) | 0x80000000 ;
+        MV_WRITE(address_reg, address);
+        MV_READ(data_reg, val);
+	return;
+}
+
+void __inline__
+write_config(unsigned long bus, unsigned long dev, unsigned long func, unsigned long reg, unsigned long val)
+{
+	unsigned int address_reg, data_reg, address;
+
+	address_reg = RALINK_PCI_CONFIG_ADDR;
+	data_reg = RALINK_PCI_CONFIG_DATA_VIRTUAL_REG;
+	address = (((reg & 0xF00)>>8)<<24) | (bus << 16) | (dev << 11) | (func << 8) | (reg & 0xfc) | 0x80000000 ;
+	MV_WRITE(address_reg, address);
+	MV_WRITE(data_reg, val);
+	return;
+}
+
+
+int __init
+pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+	u16 cmd;
+	u32 val;
+	int irq = 0;
+
+	if ((dev->bus->number == 0) && (slot == 0)) {
+		write_config(0, 0, 0, PCI_BASE_ADDRESS_0, MEMORY_BASE);
+		read_config(0, 0, 0, PCI_BASE_ADDRESS_0, (unsigned long *)&val);
+		printk("BAR0 at slot 0 = %x\n", val);
+		printk("bus=0x%x, slot = 0x%x\n",dev->bus->number, slot);
+	} else if((dev->bus->number == 0) && (slot == 0x1)) {
+		write_config(0, 1, 0, PCI_BASE_ADDRESS_0, MEMORY_BASE);
+		read_config(0, 1, 0, PCI_BASE_ADDRESS_0, (unsigned long *)&val);
+		printk("BAR0 at slot 1 = %x\n", val);
+		printk("bus=0x%x, slot = 0x%x\n",dev->bus->number, slot);
+	} else if((dev->bus->number == 0) && (slot == 0x2)) {
+		write_config(0, 2, 0, PCI_BASE_ADDRESS_0, MEMORY_BASE);
+		read_config(0, 2, 0, PCI_BASE_ADDRESS_0, (unsigned long *)&val);
+		printk("BAR0 at slot 2 = %x\n", val);
+		printk("bus=0x%x, slot = 0x%x\n",dev->bus->number, slot);
+	} else if ((dev->bus->number == 1) && (slot == 0x0)) {
+		switch (pcie_link_status) {
+		case 2:
+		case 6:
+			irq = RALINK_INT_PCIE1;
+			break;
+		case 4:
+			irq = RALINK_INT_PCIE2;
+			break;
+		default:
+			irq = RALINK_INT_PCIE0;
+		}
+		printk("bus=0x%x, slot = 0x%x, irq=0x%x\n",dev->bus->number, slot, dev->irq);
+	} else if ((dev->bus->number == 2) && (slot == 0x0)) {
+		switch (pcie_link_status) {
+		case 5:
+		case 6:
+			irq = RALINK_INT_PCIE2;
+			break;
+		default:
+			irq = RALINK_INT_PCIE1;
+		}
+		printk("bus=0x%x, slot = 0x%x, irq=0x%x\n",dev->bus->number, slot, dev->irq);
+	} else if ((dev->bus->number == 2) && (slot == 0x1)) {
+		switch (pcie_link_status) {
+		case 5:
+		case 6:
+			irq = RALINK_INT_PCIE2;
+			break;
+		default:
+			irq = RALINK_INT_PCIE1;
+		}
+		printk("bus=0x%x, slot = 0x%x, irq=0x%x\n",dev->bus->number, slot, dev->irq);
+	} else if ((dev->bus->number ==3) && (slot == 0x0)) {
+		irq = RALINK_INT_PCIE2;
+		printk("bus=0x%x, slot = 0x%x, irq=0x%x\n",dev->bus->number, slot, dev->irq);
+	} else if ((dev->bus->number ==3) && (slot == 0x1)) {
+		irq = RALINK_INT_PCIE2;
+		printk("bus=0x%x, slot = 0x%x, irq=0x%x\n",dev->bus->number, slot, dev->irq);
+	} else if ((dev->bus->number ==3) && (slot == 0x2)) {
+		irq = RALINK_INT_PCIE2;
+		printk("bus=0x%x, slot = 0x%x, irq=0x%x\n",dev->bus->number, slot, dev->irq);
+	} else {
+		printk("bus=0x%x, slot = 0x%x\n",dev->bus->number, slot);
+		return 0;
+	}
+
+	pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, 0x14);  //configure cache line size 0x14
+	pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0xFF);  //configure latency timer 0x10
+	pci_read_config_word(dev, PCI_COMMAND, &cmd);
+	cmd = cmd | PCI_COMMAND_MASTER | PCI_COMMAND_IO | PCI_COMMAND_MEMORY;
+	pci_write_config_word(dev, PCI_COMMAND, cmd);
+	pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq);
+	return irq;
+}
+
+void
+set_pcie_phy(u32 *addr, int start_b, int bits, int val)
+{
+//	printk("0x%p:", addr);
+//	printk(" %x", *addr);
+	*(unsigned int *)(addr) &= ~(((1<<bits) - 1)<<start_b);
+	*(unsigned int *)(addr) |= val << start_b;
+//	printk(" -> %x\n", *addr);
+}
+
+void
+bypass_pipe_rst(void)
+{
+#if defined (CONFIG_PCIE_PORT0)
+	/* PCIe Port 0 */
+	set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x02c), 12, 1, 0x01);	// rg_pe1_pipe_rst_b
+	set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x02c),  4, 1, 0x01);	// rg_pe1_pipe_cmd_frc[4]
+#endif
+#if defined (CONFIG_PCIE_PORT1)
+	/* PCIe Port 1 */
+	set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x12c), 12, 1, 0x01);	// rg_pe1_pipe_rst_b
+	set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x12c),  4, 1, 0x01);	// rg_pe1_pipe_cmd_frc[4]
+#endif
+#if defined (CONFIG_PCIE_PORT2)
+	/* PCIe Port 2 */
+	set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x02c), 12, 1, 0x01);	// rg_pe1_pipe_rst_b
+	set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x02c),  4, 1, 0x01);	// rg_pe1_pipe_cmd_frc[4]
+#endif
+}
+
+void
+set_phy_for_ssc(void)
+{
+	unsigned long reg = (*(volatile u32 *)(RALINK_SYSCTL_BASE + 0x10));
+
+	reg = (reg >> 6) & 0x7;
+#if defined (CONFIG_PCIE_PORT0) || defined (CONFIG_PCIE_PORT1)
+	/* Set PCIe Port0 & Port1 PHY to disable SSC */
+	/* Debug Xtal Type */
+	set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x400),  8, 1, 0x01);	// rg_pe1_frc_h_xtal_type
+	set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x400),  9, 2, 0x00);	// rg_pe1_h_xtal_type
+	set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x000),  4, 1, 0x01);	// rg_pe1_frc_phy_en               //Force Port 0 enable control
+	set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x100),  4, 1, 0x01);	// rg_pe1_frc_phy_en               //Force Port 1 enable control
+	set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x000),  5, 1, 0x00);	// rg_pe1_phy_en                   //Port 0 disable
+	set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x100),  5, 1, 0x00);	// rg_pe1_phy_en                   //Port 1 disable
+	if(reg <= 5 && reg >= 3) { 	// 40MHz Xtal
+		set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x490),  6, 2, 0x01);	// RG_PE1_H_PLL_PREDIV             //Pre-divider ratio (for host mode)
+		printk("***** Xtal 40MHz *****\n");
+	} else {			// 25MHz | 20MHz Xtal
+		set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x490),  6, 2, 0x00);	// RG_PE1_H_PLL_PREDIV             //Pre-divider ratio (for host mode)
+		if (reg >= 6) { 	
+			printk("***** Xtal 25MHz *****\n");
+			set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x4bc),  4, 2, 0x01);	// RG_PE1_H_PLL_FBKSEL             //Feedback clock select
+			set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x49c),  0,31, 0x18000000);	// RG_PE1_H_LCDDS_PCW_NCPO         //DDS NCPO PCW (for host mode)
+			set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x4a4),  0,16, 0x18d);	// RG_PE1_H_LCDDS_SSC_PRD          //DDS SSC dither period control
+			set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x4a8),  0,12, 0x4a);	// RG_PE1_H_LCDDS_SSC_DELTA        //DDS SSC dither amplitude control
+			set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x4a8), 16,12, 0x4a);	// RG_PE1_H_LCDDS_SSC_DELTA1       //DDS SSC dither amplitude control for initial
+		} else {
+			printk("***** Xtal 20MHz *****\n");
+		}
+	}
+	set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x4a0),  5, 1, 0x01);	// RG_PE1_LCDDS_CLK_PH_INV         //DDS clock inversion
+	set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x490), 22, 2, 0x02);	// RG_PE1_H_PLL_BC                 
+	set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x490), 18, 4, 0x06);	// RG_PE1_H_PLL_BP                 
+	set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x490), 12, 4, 0x02);	// RG_PE1_H_PLL_IR                 
+	set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x490),  8, 4, 0x01);	// RG_PE1_H_PLL_IC                 
+	set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x4ac), 16, 3, 0x00);	// RG_PE1_H_PLL_BR                 
+	set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x490),  1, 3, 0x02);	// RG_PE1_PLL_DIVEN                
+	if(reg <= 5 && reg >= 3) { 	// 40MHz Xtal
+		set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x414),  6, 2, 0x01);	// rg_pe1_mstckdiv		//value of da_pe1_mstckdiv when force mode enable
+		set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x414),  5, 1, 0x01);	// rg_pe1_frc_mstckdiv          //force mode enable of da_pe1_mstckdiv      
+	}
+	/* Enable PHY and disable force mode */
+	set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x000),  5, 1, 0x01);	// rg_pe1_phy_en                   //Port 0 enable
+	set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x100),  5, 1, 0x01);	// rg_pe1_phy_en                   //Port 1 enable
+	set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x000),  4, 1, 0x00);	// rg_pe1_frc_phy_en               //Force Port 0 disable control
+	set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x100),  4, 1, 0x00);	// rg_pe1_frc_phy_en               //Force Port 1 disable control
+#endif
+#if defined (CONFIG_PCIE_PORT2)
+	/* Set PCIe Port2 PHY to disable SSC */
+	/* Debug Xtal Type */
+	set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x400),  8, 1, 0x01);	// rg_pe1_frc_h_xtal_type
+	set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x400),  9, 2, 0x00);	// rg_pe1_h_xtal_type
+	set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x000),  4, 1, 0x01);	// rg_pe1_frc_phy_en               //Force Port 0 enable control
+	set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x000),  5, 1, 0x00);	// rg_pe1_phy_en                   //Port 0 disable
+	if(reg <= 5 && reg >= 3) { 	// 40MHz Xtal
+		set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x490),  6, 2, 0x01);	// RG_PE1_H_PLL_PREDIV             //Pre-divider ratio (for host mode)
+	} else {			// 25MHz | 20MHz Xtal
+		set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x490),  6, 2, 0x00);	// RG_PE1_H_PLL_PREDIV             //Pre-divider ratio (for host mode)
+		if (reg >= 6) { 	// 25MHz Xtal
+			set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x4bc),  4, 2, 0x01);	// RG_PE1_H_PLL_FBKSEL             //Feedback clock select
+			set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x49c),  0,31, 0x18000000);	// RG_PE1_H_LCDDS_PCW_NCPO         //DDS NCPO PCW (for host mode)
+			set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x4a4),  0,16, 0x18d);	// RG_PE1_H_LCDDS_SSC_PRD          //DDS SSC dither period control
+			set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x4a8),  0,12, 0x4a);	// RG_PE1_H_LCDDS_SSC_DELTA        //DDS SSC dither amplitude control
+			set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x4a8), 16,12, 0x4a);	// RG_PE1_H_LCDDS_SSC_DELTA1       //DDS SSC dither amplitude control for initial
+		}
+	}
+	set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x4a0),  5, 1, 0x01);	// RG_PE1_LCDDS_CLK_PH_INV         //DDS clock inversion
+	set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x490), 22, 2, 0x02);	// RG_PE1_H_PLL_BC                 
+	set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x490), 18, 4, 0x06);	// RG_PE1_H_PLL_BP                 
+	set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x490), 12, 4, 0x02);	// RG_PE1_H_PLL_IR                 
+	set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x490),  8, 4, 0x01);	// RG_PE1_H_PLL_IC                 
+	set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x4ac), 16, 3, 0x00);	// RG_PE1_H_PLL_BR                 
+	set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x490),  1, 3, 0x02);	// RG_PE1_PLL_DIVEN                
+	if(reg <= 5 && reg >= 3) { 	// 40MHz Xtal
+		set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x414),  6, 2, 0x01);	// rg_pe1_mstckdiv		//value of da_pe1_mstckdiv when force mode enable
+		set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x414),  5, 1, 0x01);	// rg_pe1_frc_mstckdiv          //force mode enable of da_pe1_mstckdiv      
+	}
+	/* Enable PHY and disable force mode */
+	set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x000),  5, 1, 0x01);	// rg_pe1_phy_en                   //Port 0 enable
+	set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x000),  4, 1, 0x00);	// rg_pe1_frc_phy_en               //Force Port 0 disable control
+#endif
+}
+
+int init_rt2880pci(void)
+{
+	unsigned long val = 0;
+       iomem_resource.start = 0;
+       iomem_resource.end= ~0;
+       ioport_resource.start= 0;
+       ioport_resource.end = ~0;
+
+#if defined (CONFIG_PCIE_PORT0)
+	val = RALINK_PCIE0_RST;
+#endif
+#if defined (CONFIG_PCIE_PORT1)
+	val |= RALINK_PCIE1_RST;
+#endif
+#if defined (CONFIG_PCIE_PORT2)
+	val |= RALINK_PCIE2_RST;
+#endif
+	DEASSERT_SYSRST_PCIE(val);
+	printk("release PCIe RST: RALINK_RSTCTRL = %x\n", RALINK_RSTCTRL);
+
+	bypass_pipe_rst();
+	set_phy_for_ssc();
+	ASSERT_SYSRST_PCIE(RALINK_PCIE0_RST | RALINK_PCIE1_RST | RALINK_PCIE2_RST);
+	printk("pull PCIe RST: RALINK_RSTCTRL = %x\n", RALINK_RSTCTRL);
+#if defined GPIO_PERST /* add GPIO control instead of PERST_N */ /*chhung*/
+	*(unsigned int *)(0xbe000060) &= ~(0x3<<10 | 0x3<<3);
+	*(unsigned int *)(0xbe000060) |= 0x1<<10 | 0x1<<3;
+	mdelay(100);
+	*(unsigned int *)(0xbe000600) |= 0x1<<19 | 0x1<<8 | 0x1<<7; // use GPIO19/GPIO8/GPIO7 (PERST_N/UART_RXD3/UART_TXD3)
+	mdelay(100);
+	*(unsigned int *)(0xbe000620) &= ~(0x1<<19 | 0x1<<8 | 0x1<<7);		// clear DATA
+
+	mdelay(100);
+#else
+	*(unsigned int *)(0xbe000060) &= ~0x00000c00;
+#endif
+#if defined (CONFIG_PCIE_PORT0)
+	val = RALINK_PCIE0_RST;
+#endif
+#if defined (CONFIG_PCIE_PORT1)
+	val |= RALINK_PCIE1_RST;
+#endif
+#if defined (CONFIG_PCIE_PORT2)
+	val |= RALINK_PCIE2_RST;
+#endif
+	DEASSERT_SYSRST_PCIE(val);
+	printk("release PCIe RST: RALINK_RSTCTRL = %x\n", RALINK_RSTCTRL);
+#if defined (CONFIG_PCIE_PORT0)
+	read_config(0, 0, 0, 0x70c, &val);
+	val &= ~(0xff)<<8;
+	val |= 0x50<<8;
+	write_config(0, 0, 0, 0x70c, val);
+#endif
+#if defined (CONFIG_PCIE_PORT1)
+	read_config(0, 1, 0, 0x70c, &val);
+	val &= ~(0xff)<<8;
+	val |= 0x50<<8;
+	write_config(0, 1, 0, 0x70c, val);
+#endif
+#if defined (CONFIG_PCIE_PORT2)
+	read_config(0, 2, 0, 0x70c, &val);
+	val &= ~(0xff)<<8;
+	val |= 0x50<<8;
+	write_config(0, 2, 0, 0x70c, val);
+#endif
+
+#if defined (CONFIG_PCIE_PORT0)
+	read_config(0, 0, 0, 0x70c, &val);
+	printk("Port 0 N_FTS = %x\n", (unsigned int)val);
+#endif
+#if defined (CONFIG_PCIE_PORT1)
+	read_config(0, 1, 0, 0x70c, &val);
+	printk("Port 1 N_FTS = %x\n", (unsigned int)val);
+#endif
+#if defined (CONFIG_PCIE_PORT2)
+	read_config(0, 2, 0, 0x70c, &val);
+	printk("Port 2 N_FTS = %x\n", (unsigned int)val);
+#endif
+
+	RALINK_RSTCTRL = (RALINK_RSTCTRL | RALINK_PCIE_RST);
+	RALINK_SYSCFG1 &= ~(0x30);
+	RALINK_SYSCFG1 |= (2<<4);
+	RALINK_PCIE_CLK_GEN &= 0x7fffffff;
+	RALINK_PCIE_CLK_GEN1 &= 0x80ffffff;
+	RALINK_PCIE_CLK_GEN1 |= 0xa << 24;
+	RALINK_PCIE_CLK_GEN |= 0x80000000;
+	mdelay(50);
+	RALINK_RSTCTRL = (RALINK_RSTCTRL & ~RALINK_PCIE_RST);
+	
+
+#if defined GPIO_PERST /* add GPIO control instead of PERST_N */  /*chhung*/
+	*(unsigned int *)(0xbe000620) |= 0x1<<19 | 0x1<<8 | 0x1<<7;		// set DATA
+	mdelay(100);
+#else
+	RALINK_PCI_PCICFG_ADDR &= ~(1<<1); //de-assert PERST
+#endif
+	mdelay(500);
+
+
+	mdelay(500);
+#if defined (CONFIG_PCIE_PORT0)
+	if(( RALINK_PCI0_STATUS & 0x1) == 0)
+	{
+		printk("PCIE0 no card, disable it(RST&CLK)\n");
+		ASSERT_SYSRST_PCIE(RALINK_PCIE0_RST);
+		RALINK_CLKCFG1 = (RALINK_CLKCFG1 & ~RALINK_PCIE0_CLK_EN);
+		pcie_link_status &= ~(1<<0);
+	} else {
+		pcie_link_status |= 1<<0;
+		RALINK_PCI_PCIMSK_ADDR |= (1<<20); // enable pcie1 interrupt
+	}
+#endif
+#if defined (CONFIG_PCIE_PORT1)
+	if(( RALINK_PCI1_STATUS & 0x1) == 0)
+	{
+		printk("PCIE1 no card, disable it(RST&CLK)\n");
+		ASSERT_SYSRST_PCIE(RALINK_PCIE1_RST);
+		RALINK_CLKCFG1 = (RALINK_CLKCFG1 & ~RALINK_PCIE1_CLK_EN);
+		pcie_link_status &= ~(1<<1);
+	} else {
+		pcie_link_status |= 1<<1;
+		RALINK_PCI_PCIMSK_ADDR |= (1<<21); // enable pcie1 interrupt
+	}
+#endif
+#if defined (CONFIG_PCIE_PORT2)
+	if (( RALINK_PCI2_STATUS & 0x1) == 0) {
+		printk("PCIE2 no card, disable it(RST&CLK)\n");
+		ASSERT_SYSRST_PCIE(RALINK_PCIE2_RST);
+		RALINK_CLKCFG1 = (RALINK_CLKCFG1 & ~RALINK_PCIE2_CLK_EN);
+		pcie_link_status &= ~(1<<2);
+	} else {
+		pcie_link_status |= 1<<2;
+		RALINK_PCI_PCIMSK_ADDR |= (1<<22); // enable pcie2 interrupt
+	}
+#endif
+	if (pcie_link_status == 0)
+		return 0;
+
+/*
+pcie(2/1/0) link status	pcie2_num	pcie1_num	pcie0_num
+3'b000			x		x		x
+3'b001			x		x		0
+3'b010			x		0		x
+3'b011			x		1		0
+3'b100			0		x		x
+3'b101			1		x		0
+3'b110			1		0		x
+3'b111			2		1		0
+*/
+	switch(pcie_link_status) {
+	case 2:
+		RALINK_PCI_PCICFG_ADDR &= ~0x00ff0000;
+		RALINK_PCI_PCICFG_ADDR |= 0x1 << 16;	//port0
+		RALINK_PCI_PCICFG_ADDR |= 0x0 << 20;	//port1
+		break;
+	case 4:
+		RALINK_PCI_PCICFG_ADDR &= ~0x0fff0000;
+		RALINK_PCI_PCICFG_ADDR |= 0x1 << 16;	//port0
+		RALINK_PCI_PCICFG_ADDR |= 0x2 << 20;	//port1
+		RALINK_PCI_PCICFG_ADDR |= 0x0 << 24;	//port2
+		break;
+	case 5:
+		RALINK_PCI_PCICFG_ADDR &= ~0x0fff0000;
+		RALINK_PCI_PCICFG_ADDR |= 0x0 << 16;	//port0
+		RALINK_PCI_PCICFG_ADDR |= 0x2 << 20;	//port1
+		RALINK_PCI_PCICFG_ADDR |= 0x1 << 24;	//port2
+		break;
+	case 6:
+		RALINK_PCI_PCICFG_ADDR &= ~0x0fff0000;
+		RALINK_PCI_PCICFG_ADDR |= 0x2 << 16;	//port0
+		RALINK_PCI_PCICFG_ADDR |= 0x0 << 20;	//port1
+		RALINK_PCI_PCICFG_ADDR |= 0x1 << 24;	//port2
+		break;
+	}
+	printk(" -> %x\n", RALINK_PCI_PCICFG_ADDR);
+	//printk(" RALINK_PCI_ARBCTL = %x\n", RALINK_PCI_ARBCTL);
+
+/*
+	ioport_resource.start = rt2880_res_pci_io1.start;
+  	ioport_resource.end = rt2880_res_pci_io1.end;
+*/
+
+	RALINK_PCI_MEMBASE = 0xffffffff; //RALINK_PCI_MM_MAP_BASE;
+	RALINK_PCI_IOBASE = RALINK_PCI_IO_MAP_BASE;
+
+#if defined (CONFIG_PCIE_PORT0)
+	//PCIe0
+	if((pcie_link_status & 0x1) != 0) {
+		RALINK_PCI0_BAR0SETUP_ADDR = 0x7FFF0001;	//open 7FFF:2G; ENABLE
+		RALINK_PCI0_IMBASEBAR0_ADDR = MEMORY_BASE;
+		RALINK_PCI0_CLASS = 0x06040001;
+		printk("PCIE0 enabled\n");
+	}
+#endif
+#if defined (CONFIG_PCIE_PORT1)
+	//PCIe1
+	if ((pcie_link_status & 0x2) != 0) {
+		RALINK_PCI1_BAR0SETUP_ADDR = 0x7FFF0001;	//open 7FFF:2G; ENABLE
+		RALINK_PCI1_IMBASEBAR0_ADDR = MEMORY_BASE;
+		RALINK_PCI1_CLASS = 0x06040001;
+		printk("PCIE1 enabled\n");
+	}
+#endif
+#if defined (CONFIG_PCIE_PORT2)
+	//PCIe2
+	if ((pcie_link_status & 0x4) != 0) {
+		RALINK_PCI2_BAR0SETUP_ADDR = 0x7FFF0001;	//open 7FFF:2G; ENABLE
+		RALINK_PCI2_IMBASEBAR0_ADDR = MEMORY_BASE;
+		RALINK_PCI2_CLASS = 0x06040001;
+		printk("PCIE2 enabled\n");
+	}
+#endif
+
+
+	switch(pcie_link_status) {
+	case 7:
+		read_config(0, 2, 0, 0x4, &val);
+		write_config(0, 2, 0, 0x4, val|0x4);
+		// write_config(0, 1, 0, 0x4, val|0x7);
+	case 3:
+	case 5:
+	case 6:
+		read_config(0, 1, 0, 0x4, &val);
+		write_config(0, 1, 0, 0x4, val|0x4);
+		// write_config(0, 1, 0, 0x4, val|0x7);
+	default:
+		read_config(0, 0, 0, 0x4, &val);
+		write_config(0, 0, 0, 0x4, val|0x4); //bus master enable
+		// write_config(0, 0, 0, 0x4, val|0x7); //bus master enable
+	}
+	register_pci_controller(&rt2880_controller);
+	return 0;
+
+}
+arch_initcall(init_rt2880pci);
+
+int pcibios_plat_dev_init(struct pci_dev *dev)
+{
+	return 0;
+}